Toyota Tundra recalls

• Engine#2026241May 20, 2026

  16,898 units affected

  Issue: On certain vehicles, the engine may not have been manufactured properly. As a result, metal debris could cause the crankshaft bearings to fail. If this happens, the engine may run rough or may not start. This could also cause the engine to stall while driving. Note: This recall only affects certain vehicles equipped with a 3.4L twin-turbo engine. This recall replaces Transport Canada recall No. 2025-614. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to inspect the No. 1 main bearing for abnormal wear and, if necessary, replace the engine.

• Visual System#2026026January 23, 2026

  12,179 units affected

  Issue: Under certain conditions, a software problem could cause the rearview camera image to freeze or not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall affects both Tundra and Tundra hybrid models equipped with a panoramic view monitor system. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to update the parking assist electronic control unit software.

• Engine#2025614November 6, 2025

  13,164 units affected

  This recall was replaced by Transport Canada recall no. 2026-241. Issue: On certain vehicles, the engine may not have been manufactured properly. As a result, metal debris could cause the crankshaft bearings to fail. If this happens, the engine may run rough or may not start. This could also cause the engine to stall while driving. Note: This recall only affects certain vehicles equipped with a 3.4L twin-turbo engine. This recall is an expansion of Transport Canada Recall No. 2024-304. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: The company will notify owners by mail. The corrective actions for this recall are under development.

• Visual System#2025522October 1, 2025

  32,733 units affected

  Issue: Under certain conditions, a problem with the rearview camera could cause the rearview camera image not to display correctly or at all. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall only affects vehicles equipped with a 14-inch multimedia display. For the Tundra model, this recall affects both Tundra and Tundra hybrid models. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners in writing and advise you to take your vehicle to a dealership to update the multimedia display software.

• Lights And Instruments#2025263May 15, 2025

  45,684 units affected

  Issue: On certain trucks, the reverse lamp assemblies may not be sealed correctly. As a result, over time, water could leak into the lamp(s) and cause them not to work. Note: This recall affects both Tundra and Tundra Hybrid models. Safety Risk: Reverse lamps that don't work could cause others not to recognize when a vehicle is backing up, and increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your truck to a dealership to inspect and, if necessary, replace both reverse lamp assemblies. Additionally, the dealer will inspect and, if necessary, repair the wiring for the reverse lamps.

• Tires#2024607October 15, 2024

  918 units affected

  Issue: On certain vehicles, the passenger-side front and rear tires may have been damaged during vehicle assembly. This could cause a sudden loss of air pressure and result in a tire failure. Note: For the Tundra model, this recall affects both Tundra and Tundra hybrid models. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect and replace the affected tires.

• Engine#2024304May 30, 2024

  9,979 units affected

  Issue: On certain vehicles, the engine may not have been manufactured properly. As a result, metal debris could cause the crankshaft bearings to fail. If this happens, the engine may run rough or may not start. This could also cause the engine to stall while driving. Note: This recall only affects certain vehicles equipped with a 3.4L twin-turbo engine. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the engine.

• Powertrain#2024109February 21, 2024

  28,061 units affected

  Issue: On certain vehicles, a problem with the transmission could cause the vehicle to move forward when the driver shifts to the ''N''(Neutral) position and the brakes or parking brake aren't applied. Note: For the Tundra model, this recall affects both Tundra and Tundra Hybrid models. For the Sequoia model, only the Sequoia Hybrid model is affected by this recall. Safety Risk: A vehicle that moves suddenly could create the risk of an injury or a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to update the transmission control unit software.

• Fuel System#2023445August 10, 2023

  17,299 units affected

  Issue: On certain trucks, a plastic fuel tube on the top of the fuel tank may not be secured correctly. As a result, the fuel tube could be damaged by contact with the brake lines and create a fuel leak. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Toyota will notify owners by mail and advise you to take your truck to a dealership for an interim repair. Once replacement parts are available, you will need to return to the dealership to replace the fuel tube with an improved part and have additional clamps installed.

• Accessories#2023373July 7, 2023

  94 units affected

  Issue: On certain vehicles, the chain on the spare tire carrier could break. If this happens, the spare tire could fall from the vehicle. Safety Risk: A spare tire that detaches from a vehicle could create a hazard for other road users and increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to replace the spare tire carrier assembly.

• Accessories#2023112March 3, 2023

  13,556 units affected

  Issue: On certain trucks, the bed-cover could come loose while driving and detach from the truck. Note: This recall affects Tundra and Tundra Hybrid models equipped with an optional Toyota genuine accessory tri-fold hard tonneau cover that was installed before delivery or sold as a dealer accessory. Safety Risk: A tonneau cover that separates from a moving vehicle could create a hazard for other drivers and nearby people. Corrective Actions: Toyota will notify owners by mail and advise you to remove the tonneau cover. The corrective actions for this recall are under development. Toyota will send you a second notice when a final repair is available.

• Visual System#2023084February 22, 2023

  794 units affected

  Issue: On certain trucks, a software problem could cause the instrument cluster display to go blank while driving. As a result, you may not be able to see certain information about the vehicle, including the gauges, warnings, and malfunction tell-tale graphics. Note: This recall affects Tundra and Tundra Hybrid models. Safety Risk: Warnings and malfunction tell-tale information that do not display could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealership to update the combination meter electronic control unit software.

• Brakes#2022493September 1, 2022

  9,585 units affected

  Issue: On certain vehicles, a programming error could cause the parking brake system to malfunction. If this happens, a warning light will turn on and the message "Parking Brake Malfunction, Visit Your Dealer" will display. Also, you may not be able to apply the parking brake, and if the vehicle isn't in park, it could roll away. Safety Risk: A parked vehicle that moves unexpectedly could increase the risk of an injury or a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealership to reprogram the skid control ECU.

• Visual System#2022374July 13, 2022

  2,075 units affected

  Issue: On certain trucks equipped with a panoramic view monitor, a software problem could cause the front camera image to appear on the multimedia display instead of the rearview camera image. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your truck to a dealership to update the parking assist ECU software.

• Powertrain#2022330June 23, 2022

  5,182 units affected

  Issue: Over time, the nuts that attach the axle shafts to the axle housing could loosen and fall off. If this happens, one or both axle shafts could separate from the axle housing. This could cause noise and vibration and/or a differential oil leak. An axle shaft that separates can cause reduced braking and vehicle stability. Safety Risk: Reduced vehicle stability could cause a loss of control. Reduced braking can cause extended stopping distances. Both of these issues could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your truck to a dealership to inspect the rear axle assembly and retighten the axle flange nuts. For vehicles where other axle-related components are damaged, they will be replaced, if necessary.

• Visual System#2022215April 28, 2022

  913 units affected

  Issue: On certain trucks equipped with a panoramic view monitor, a software problem could cause the rearview camera image not to appear on the multimedia display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your truck to a dealership to update the parking assist ECU software.

• Electrical#2021723November 24, 2021

  55,683 units affected

  Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

• Steering#2021718November 23, 2021

  1,235 units affected

  Issue: On certain vehicles, a defect in the steering gear assembly could cause it to leak power steering fluid. If this happens, there could be a loss of power steering assist. Note: For 2007-2020 models, this recall only affects 41 vehicles that had a replacement steering gear installed in 2021. Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to inspect, and if necessary, replace power steering gear assembly.

• Lights And Instruments#2021544September 2, 2021

  6,380 units affected

  Issue: On certain trucks equipped with halogen headlamps, when the high beams are switched on, both the high and low beam lights turn on. Under certain conditions, this could cause the headlamps and wiring to overheat. Safety Risk: A headlamp that overheats can cause a loss of lighting and could create a fire risk. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to modify the engine wire harness assembly. The dealer will also inspect the headlamp assemblies, bulbs and bulb connectors for damage. The dealer will replace parts damaged by this problem.

• Fuel System#2020514October 28, 2020

  126,597 units affected

  Issue: On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This recall is an expansion of recalls SRC R95/SRC R96 and SRC RA2/SRC RA3 (Transport Canada Recall Numbers 2020-005 and 2020-088). Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Lights And Instruments#2020321July 15, 2020

  23,080 units affected

  Issue: On certain vehicles, the wire harness for the front turn signal lights was assembled incorrectly. As a result, the turn signals and hazard warning lights are not bright enough to meet Canadian regulations. This could cause other road users not to notice when the signal or hazard warning lights are turned on. Safety Risk: Signal lights that are not bright enough could make the vehicle less visible to others, and could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to modify the wire harness for the front turn signal lights.

• Fuel System#2020088March 4, 2020

  111,835 units affected

  Issue: On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This recall is an expansion of recall SRC R95/SRC R96 (Transport Canada Recall No. 2020-005) Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Fuel System#2020005January 13, 2020

  46,733 units affected

  Issue: On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Label#2019651December 20, 2019

  178 units affected

  Issue: On certain vehicles, the spare tire size is listed as P275/65R18, whereas the actual installed spare tire size is P255/70R18. Canadian regulations require companies correct tire information on the tire information label. Safety Risk: This small error is unlikely to affect safety. Corrective Action: This is not a recall. This notice is for information only. The company has made changes to correct this label on all new vehicles.

• Airbag#2018547October 5, 2018

  15,774 units affected

  Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts and CMVSS 214 - Side Impact Protection. The airbag (SRS) control unit may incorrectly detect a fault in one or more of the front or side airbag impact sensors during vehicle start up. In the event of a crash where airbag deployment is required, this may result in the airbags not deploying as designed, increasing the risk of injury. Upon detection of a fault in the airbag system, multiple warning lights would activate, a warning buzzer would sound, and a warning message would display on the instrument panel display. Correction: Dealers will update the airbag control unit software. Note: This recall supersedes recall 2018-100. Vehicles repaired as part of the previous recall will require re-inspection and repair.

• Electrical#2018100February 21, 2018

  8,180 units affected

  Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 126 - Electronic Stability Control Systems. Electrical noise could be introduced into the YAW rate sensor within the airbag ECU, which could result in deactivation of the Vehicle Stability Control and Pre-Collision systems and limited function of the Trailer Brake Controller system. This would be contrary to the requirements of the standard, and could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update the software of the ECU. Note: This recall is superseded by recall 2018547. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018547">recall 2018547</a> for more information.

• Seats And Restraints#2018097February 20, 2018

  578 units affected

  Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard CMVSS 207 - Anchorage of Seats, CMVSS 210 - Seat Belt Anchorages, CMVSS 210.1 - User-ready Tether Anchorages for Restraint Systems and Booster Seats, and CMVSS 210.2 - Lower Universal Anchorage Systems for Restraint Systems and Booster Seats. One or more of the bolts fixing the left hand rear split seat bracket sub-assemblies to the floor pan may not have been tightened properly during assembly. This could allow the seat to move in the event of a crash, increasing the risk of injury to the seat occupant. Correction: Dealers will retighten the five seat leg bracket bolts.

• Electrical#2017363July 20, 2017

  39,189 units affected

  On certain vehicles, the electrical power cords of some dealer installed block heaters may have been improperly manufactured, causing the wires to contact each other, resulting in a short circuit. A short circuit could lead to a fire which would increase the risk of injury and/or damage to property. Correction: For vehicles where the subject block heater was approved for installation, the dealer will replace the block heater assembly with a new one of an improved design. For vehicles where the subject block heater was not approved for installation, dealers will remove the block heater assembly. In the interim, until the remedy can be performed, dealers will cut the plug end from the block heater cord to disable the block heater's operation.

• Structure#2017036January 24, 2017

  6,157 units affected

  On certain vehicles equipped with the plastic rear step bumper, the resin reinforcement brackets that secure the step corners of the bumper could become damaged after a rear impact. If a person were to use the rear bumper steps with damaged resin reinforcement brackets, part of the bumper could break off which could cause the person to fall, increasing the risk of injury. Correction: Dealers will replace the resin reinforcement brackets with steel reinforcement brackets. In addition, the rear bumper tread covers will also be replaced.

• Electrical#2015493October 21, 2015

  315,091 units affected

  On certain vehicles, inconsistent application of grease during the manufacturing process could cause the driver's side power window master switch to stick or become inoperative due to electrical contact point wear. This could cause debris to accumulate between the contact points, potentially resulting in an electrical short circuit. If a short circuit occurs, the switch assembly may overheat, produce smoke, melt and/or potentially lead to a fire causing injury and/or property damage. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary. Note: This is an expansion of recall 2012-338.

• Label#2015454October 7, 2015

  10,559 units affected

  Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 110 - Tire Selection and Rims. Certain compliance labels were misprinted and omitted the French translation of the word ‘RIMS’ (JANTES). As such, these labels do not meet the requirements of CMVSS 110, specifically TSD 110 S4.3.3. The numerical designation of the rim size is correctly printed and it is only the French translation of the word "RIMS" that has been omitted. Correction: A production change has been undertaken to remedy this technical non-compliance condition. No corrective recall action is required as the technical non-compliance conditions are deemed to be non-safety related.

• Airbag#2014395September 15, 2014

  10,038 units affected

  On certain vehicles, the B-pillar upper trim may have been installed improperly and could interfere with the side curtain airbag in the event of a deployment. Failure of the side curtain airbag to deploy to its intended shape during a crash (where deployment is warranted) could increase the risk of injury to the vehicle occupants. Correction: Dealers will inspect the installation condition and will replace the trim if it is found not to be correctly installed.

• Accessories#2013353October 10, 2013

  369 units affected

  On certain vehicles equipped with an optional tonneau cover where the front-most panel can be opened with the vehicle ignition key, the lock cylinder could bind. If the lock cylinder were to bind in the open position, the panel may not remain closed and the tonneau cover assembly could separate from the vehicle while it is being driven. This could potentially result in property damage and pose a hazard to other road users. Correction: Dealers will affect repairs when service parts become available. In the interim, the panel release mechanism will be disabled or the tonneau cover removed, at the owner's choice.

• Powertrain#2011170April 26, 2011

  3,447 units affected

  On certain vehicles, the propeller shaft slip yoke may fail. This could allow the propeller shaft to separate (at the joint) and contact the road surface, which could result in a loss of vehicle control and a crash. In addition, propeller shaft separation would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Either condition could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the propeller shaft assembly.

• Accessories#2010124April 19, 2010

  46,923 units affected

  On certain vehicles, if the Toyota optional accessory "tray-type" floor mat is not secured by the retaining hooks, or if it is placed on top of an existing floor mat, the "tray-type" floor mat could move forward and interfere with the accelerator pedal. This could result in a crash causing property damage, personal injury or death. Correction: The manufacturer will notify owners to remove the "tray-type" floor mat and provide instructions on how to obtain a reimbursement.

• Other#2010012January 22, 2010

  273,050 units affected

  On certain vehicles, accelerator pedal movement may become rough, slow to return, or the pedal may stick in a depressed position. This could result in a loss of throttle control and a vehicle crash, causing property damage, personal injury or death. Correction: Dealers will install a steel reinforcement bar to the accelerator pedal assembly. With this reinforcement in place, the excess friction that can cause the pedal to stick is eliminated.

• Other#2009290October 7, 2009

  437,445 units affected

  On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.

Canadian data updated August 24, 2026