RECALLS — MAKE · MODEL · YEAR
2025 Toyota Tundra recalls
8 safety recall campaigns have been filed for the 2025 Toyota Tundra with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 03
- U.S. recalls
- 05
- Total campaigns
- 08
Transport Canada recalls
03- Visual System#2026026
12,179 units affected
Issue: Under certain conditions, a software problem could cause the rearview camera image to freeze or not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall affects both Tundra and Tundra hybrid models equipped with a panoramic view monitor system. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to update the parking assist electronic control unit software.
- Visual System#2025522
32,733 units affected
Issue: Under certain conditions, a problem with the rearview camera could cause the rearview camera image not to display correctly or at all. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall only affects vehicles equipped with a 14-inch multimedia display. For the Tundra model, this recall affects both Tundra and Tundra hybrid models. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners in writing and advise you to take your vehicle to a dealership to update the multimedia display software.
- Lights And Instruments#2025263
45,684 units affected
Issue: On certain trucks, the reverse lamp assemblies may not be sealed correctly. As a result, over time, water could leak into the lamp(s) and cause them not to work. Note: This recall affects both Tundra and Tundra Hybrid models. Safety Risk: Reverse lamps that don't work could cause others not to recognize when a vehicle is backing up, and increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your truck to a dealership to inspect and, if necessary, replace both reverse lamp assemblies. Additionally, the dealer will inspect and, if necessary, repair the wiring for the reverse lamps.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
05- EQUIPMENT:OTHER:LABELS#26V571000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Toyota Tacoma Hybrid, 2025 Tundra Hybrid, Tundra, 2026 RAV4 Hybrid, 4Runner i-Force Max Hybrid, and 4Runner vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, increasing the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed October 18, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA18.
- EQUIPMENT:OTHER:LABELS#26V179000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
- BACK OVER PREVENTION:SOFTWARE#26V038000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Risk: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
- BACK OVER PREVENTION:SOFTWARE#25V657000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Risk: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
- EXTERIOR LIGHTING:BACK UP LIGHTS#25V322000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Risk: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2025 Toyota Tundra VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.