2017 Western Star 5700 recalls

• Electrical#2021697November 12, 2021

  3,071 units affected

  Issue: On certain trucks, the pass-through power stud (an electrical connection located on the bulkhead) may come into contact with the bulkhead. If this happens, there could be electrical arcing (sparks). Note: This recall replaces FL-766 (Transport Canada Recall 2018-190). If your truck was inspected as a part of that recall, but the pass-through power stud was not replaced, your truck requires this repair. Safety Risk: Electrical arcing could create the risk of a fire. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the pass-through power stud.

• Structure#2019552November 4, 2019

  2,078 units affected

  Issue: On certain trucks, the strut-rod for the sleeper cab vent windows may not be properly attached. This could cause the vent window to over rotate and detach from the vehicle. Safety Risk: A window that separates from a moving vehicle could create a hazard for other drivers and nearby people. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a Daimler Trucks of North America authorized service facility to replace the vent windows.

• Structure#2019508October 10, 2019

  2,427 units affected

  Issue: On certain trucks, the baggage and/or sleeper side doors may not be properly attached to their hinges. This could cause the door(s) to detach while driving. Safety Risk: A baggage and/or sleeper side door that falls from the truck could create a road hazard for others and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your vehicle to a DTNA authorized service facility to install two reinforcement clips on each baggage and sleeper door hinge.

• Accessories#2017636December 18, 2017

  16,510 units affected

  On certain vehicles equipped with Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Owners will be provided with instructions on how to inspect the fire extinguisher to see if it is recalled. Replacement fire extinguishers will be supplied by Kidde directly. Note: For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.

• Brakes#2017583November 28, 2017

  41,763 units affected

  On certain vehicles with air brakes, after several hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. If the brake lights do not illuminate, following road users would be unaware of the intent of the driver to slow the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will repair the brake light pressure switch.

• Seats And Restraints#2016483October 4, 2016

  1,877 units affected

  On certain vehicles equipped with a Stratosphere sleeper cab, a seat belt mount failed during testing due to an incorrect diameter hole on the seat belt anchor plate. If this condition is present, the seat belt may not properly restrain the occupant in the event of a crash, which could increase the risk of injury. Correction: Dealers will reinforce the seat belt anchor plate.

• Wheels#2016419August 30, 2016

  149 units affected

  On certain vehicles, the specified front axle weight limit may be greater than the hub capacity. If the axle load exceeds the maximum weight capacity of the hub, there is an increased risk of hub fatigue, which could cause a complete separation of the wheel(s) and a loss of vehicle control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the incorrectly specified front axle hubs.

Canadian data updated August 24, 2026

• ELECTRICAL SYSTEM:WIRING#21V882000November 12, 2021

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances, the power stud may contact the bulkhead and result in an electrical arc.

  Risk: An electrical arc can increase the risk of a fire.

  Remedy: Dealers will replace the pass-through power studs, free of charge. Owner notification letters were mailed January 7, 2022. This recall supersedes previous recall number 18V-191. Vehicles previously inspected and considered complete under 18V-191 will need to return for the new remedy. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-907.

• EXTERIOR LIGHTING#20V214000April 14, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

  Risk: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

• VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:REAR WINDOW#19V792000November 4, 2019

  Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2020 Western Star 4900 and 5700 vehicles equipped with sleeper cab vent windows. Due to improper adhesive, the vent window may detach from the vehicle.

  Risk: If the vent window detaches while the vehicle is in motion, it can become a road hazard, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will replace the vent windows, free of charge. DTNA issued owners an interim notification on December 27, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-836.

• STRUCTURE:BODY:DOOR#19V722000October 10, 2019

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2020 Western Star 4900 and 5700 vehicles. The adhesive bond may fail allowing the baggage or sleeper side door to separate from the hinges.

  Risk: A baggage or sleeper side door that separates from the vehicle while in motion can cause road debris, increasing the risk of an injury or crash.

  Remedy: DTNA will notify owners and dealers will install reinforcement clips with mechanical fasteners on each baggage and sleeper door hinge, free of charge. DTNA issued owners an interim notification on December 6, 2019. The recall began September 21, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL834.

• STEERING#18V913000December 19, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

  Risk: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

  Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

• SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER#18V353000May 29, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen.

  Risk: If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.

• ELECTRICAL SYSTEM:WIRING#18V191000March 26, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances the power stud may contact the bulkhead and result in an electrical arc.

  Risk: An electrical arc can increase the risk of a fire.

  Remedy: DTNA will notify owners, and dealers will inspect the power stud for the proper clearance to the bulkhead, and replace it if necessary, free of charge. DTNA issued an interim notification to owners on May 23, 2018. The recall began October 29, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-766.

• EQUIPMENT#17V810000December 15, 2017

  Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

  Risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

  Remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

• EXTERIOR LIGHTING:BRAKE LIGHTS#17V761000November 28, 2017

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.

  Risk: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.

• POWER TRAIN:AXLE ASSEMBLY#17V315000May 11, 2017

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017 Freightliner Cascadia and Western Star 5700 trucks built with NFD tandem rear axles. During the hardening process, the axle assembly output shaft may have been made brittle, possibly resulting in the output shaft fracturing while the vehicle is in use.

  Risk: If output shaft fractures while descending a grade, the compression braking will be ineffective. Additionally, large debris may land in the road. Both scenarios increase the risk of a crash.

  Remedy: DTNA will notify the owners, and Detroit Axle dealers will replace the output shaft, free of charge. The recall began on July 7, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-738.

• SEAT BELTS#16V711000October 5, 2016

  Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Western Star 4900 and 5700 trucks manufactured March 22, 2013, to September 23, 2016 and equipped with a Stratosphere sleeper cab. The seat belt mounting plate may have a drill hole that is too large.

  Risk: If the plate has a hole that is too big, the plate may fail when it stressed such as in the event of a crash, preventing the seat belt from adequately restraining the seat occupant, increasing the risk of injury.

  Remedy: DTNA will notify owners, and dealers will reinforce the seat belt mounting plate, free of charge. An interim notice was mailed to owners on December 7 2016. The final remedy is now available. A second notice was mailed to owners on February 24, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-725.

• POWER TRAIN:AXLE HUBS#16V634000August 31, 2016

  Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Freightliner M2 Business Class, 108 SD, 114 SD, Cascadia, Coronado, Western Star 4700, 4800, and 5700 XE trucks manufactured March 15, 2013, to July 29, 2016 and equipped with Conmet aluminum non-high capacity hubs. These vehicles specify a front axle weight limit that may be greater than that of the hub capacity. As a result, the hub may fail and the wheel may separate from the axle.

  Risk: If a wheel separates from the axle, there would be an increased risk of a crash.

  Remedy: DTNA will notify owners, and dealers will replace the front axle hubs, free of charge. The recall began during November 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-718.