RECALLS — WESTERN STAR 5700
Western Star 5700 recalls
Western Star 5700 model years 2010–2022 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
22- Electrical#2021697
3,071 units affected
Issue: On certain trucks, the pass-through power stud (an electrical connection located on the bulkhead) may come into contact with the bulkhead. If this happens, there could be electrical arcing (sparks). Note: This recall replaces FL-766 (Transport Canada Recall 2018-190). If your truck was inspected as a part of that recall, but the pass-through power stud was not replaced, your truck requires this repair. Safety Risk: Electrical arcing could create the risk of a fire. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the pass-through power stud.
- Lights And Instruments#2021695
170 units affected
Issue: On certain trucks, the tail lamps on the trailer do not turn on when the daytime running lamps (DRLs) are on. New Canadian regulations require that, if a vehicle has dash backlighting, the low beam headlamps and tail lamps must automatically switch on when it is dark or the tail lamps must stay on at all times. Safety Risk: Driving without tail lamps in low light conditions could make the truck less visible and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to install a jumper harness.
- Steering#2021304
712 units affected
Issue: On certain vehicles, the tie rod clamp may not have been properly tightened. As a result, the tie rod end could loosen and separate. If this happens, there could be a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your vehicle to a DTNA authorized service facility to replace the tie rod clamp nuts and bolts.
- Steering#2021219
658 units affected
Issue: On certain trucks, the tie rod arm and steering arm bolts may be defective and could break. If this happens, there could be a loss of steering control. Note: This recall only affects trucks built with a Detroit front axle. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the tie rod arm bolts and the steering arm bolts.
- Electrical#2021172
1,677 units affected
Issue: On certain trucks, an undersized wire in the ground circuit harness could overheat and melt a connector. If this happens, the engine may stall and you may not be able to restart it. Safety Risk: A loss of engine power could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to replace the ground wire harness.
- Wheels#2020513
215 units affected
Issue: On certain trucks, the spindle nut snap ring on the left side of the steer axle may not be installed correctly or may be missing. As a result, the tire and wheel assembly could separate from the truck. Safety Risk: A wheel separation could cause a loss of control and increase the risk of a crash. A wheel that separates could also hit another person or vehicle. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility for an inspection. The snap ring will be reinstalled or replaced, as necessary.
- Powertrain#2020488
966 units affected
Issue: On certain trucks equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), a component within the clutch assembly could fail. If this happens, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied. Note: This recall replaces FL-803 (Transport Canada recall 2018-714). Trucks that were repaired under that recall also require this repair. Safety Risk: Sudden and unexpected movement of the vehicle could create a risk of injury or a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the clutch and update the transmission software.
- Electrical#2020217
840 units affected
Issue: On certain trucks, an undersized wire in the ground circuit harness could overheat and melt a connector. If this happens, the engine may stall and you may not be able to restart it. Safety Risk: A loss of engine power could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to replace the ground wire harness.
- Brakes#2020086
231 units affected
Issue: On certain trucks equipped with air disc brakes, the brake caliper mounting bolts may not be properly tightened. This could cause the caliper bolts to loosen and result in reduced brake effectiveness. Safety Risk: Reduced brake effectiveness could cause an increase in stopping distance and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to an authorized Daimler Trucks of North America Service Facility to inspect and replace the brake caliper bolts as necessary.
- Structure#2019552
2,078 units affected
Issue: On certain trucks, the strut-rod for the sleeper cab vent windows may not be properly attached. This could cause the vent window to over rotate and detach from the vehicle. Safety Risk: A window that separates from a moving vehicle could create a hazard for other drivers and nearby people. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a Daimler Trucks of North America authorized service facility to replace the vent windows.
- Structure#2019508
2,427 units affected
Issue: On certain trucks, the baggage and/or sleeper side doors may not be properly attached to their hinges. This could cause the door(s) to detach while driving. Safety Risk: A baggage and/or sleeper side door that falls from the truck could create a road hazard for others and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your vehicle to a DTNA authorized service facility to install two reinforcement clips on each baggage and sleeper door hinge.
- Brakes#2019227
52 units affected
Issue: On certain trucks equipped with air disc brakes, the brake caliper mounting bolts may not be properly tightened. This could cause the caliper bolts to loosen and result in reduced brake effectiveness. Safety Risk: Reduced brake effectiveness could cause an increase in stopping distance and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to an authorized Daimler Trucks of North America Service Facility to inspect and replace the brake caliper bolts as necessary.
- Powertrain#2018714
1,472 units affected
This recall was replaced by Transport Canada Recall No. 2020-488. On certain vehicles equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), an internal component within the clutch assembly may have been manufactured improperly and could fail. If this occurs, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Authorized Service Facilities will recalibrate the Transmission Control Module (TCM) and replace components as necessary.
- Steering#2018551
87 units affected
On certain trucks, the steering wheel may not have been installed correctly and could possibly detach from the steering column. This could cause a loss of connection between the steering wheel and the front wheels, resulting in a loss of steering control and creating the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America Authorized Service Facilities will inspect the installation of the steering wheel and repair as necessary.
- Brakes#2018550
482 units affected
On certain vehicles equipped with air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary.
- Brakes#2018285
683 units affected
On certain vehicles equipped with air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary. Note: This recall supersedes recall 2017-580. Vehicles repaired as part of the previous recall will require re-inspection and repair.
- Accessories#2017636
16,510 units affected
On certain vehicles equipped with Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Owners will be provided with instructions on how to inspect the fire extinguisher to see if it is recalled. Replacement fire extinguishers will be supplied by Kidde directly. Note: For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
- Brakes#2017583
41,763 units affected
On certain vehicles with air brakes, after several hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. If the brake lights do not illuminate, following road users would be unaware of the intent of the driver to slow the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will repair the brake light pressure switch.
- Brakes#2017580
327 units affected
On certain vehicles equipped with certain air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary. Note: This recall is superseded by recall 2018285 (FL-772). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018285">recall 2018285</a> for more information.
- Structure#2017357
320 units affected
On certain vehicles, certain tow hooks that are used for recovery purposes may have been incorrectly manufactured and may not meet material strength specifications. If the tow hook were to fail during towing or a recovery operation, a sudden release of the vehicle without warning could occur, increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will inspect tow hooks for a certain manufacture date code, and replace if needed.
- Seats And Restraints#2016483
1,877 units affected
On certain vehicles equipped with a Stratosphere sleeper cab, a seat belt mount failed during testing due to an incorrect diameter hole on the seat belt anchor plate. If this condition is present, the seat belt may not properly restrain the occupant in the event of a crash, which could increase the risk of injury. Correction: Dealers will reinforce the seat belt anchor plate.
- Accessories#2015133
1,403 units affected
On certain vehicles, the handheld Kidde plastic valve disposable fire extinguisher may not function as designed. In certain instances, the extinguisher may fail to fully discharge when the lever is pressed multiple times. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: A replacement extinguisher will be provided by dealers or Kidde directly.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada