RECALLS — TEREX XT PRO
Terex XT PRO recalls
Terex XT PRO model years 2015–2024 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
04- Structure#2024406
6 units affected
Issue: This recall is for replacement brackets that connect the aerial basket to the boom. The replacement brackets may not be compatible with the original aerial basket retaining pins. As a result, if both basket retaining pins fail, the basket could tip. Note: This recall is not being conducted under the requirements of the Motor Vehicle Safety Act. The part number for the affected replacement brackets is 626478. Safety Risk: An aerial basket that tips suddenly could create a risk of injury to the operator and people nearby. Corrective Actions: Terex will notify owners by mail and provide you with parts and instructions for how to replace the retaining pins. If you have questions about repairing your unit, you should contact your local Terex Utilities dealer.
- Accessories#2024047
5 units affected
Issue: On a small number of aerial devices, the turntable bolts may not have been tightened properly. As a result, the bolts could loosen and fail. If this happens, the boom could fall. Safety Risk: A boom that falls could create a risk of injury for the operator and people nearby. Corrective Actions: Terex will notify owners by mail and provide you with instructions for how to inspect and, if necessary, tighten the turntable bolts. Terex advises you to perform a daily inspection of the bolts and not to use the aerial device if the bolts are loose.
- Structure#2022178
23 units affected
Issue: Certain aerial devices may not have had all pivot points lubricated during assembly. This could cause the pivot pins to seize and the pin retainers to break. If this happens, the lower boom cylinder could disconnect from the turntable. Safety Risk: A lower boom cylinder that separates from the turntable could create a risk of injury. Corrective Actions: Terex will notify owners by mail and provide you with instructions for inspecting all pivot points. If the pivot pins are seized or the pin retaining components are damaged, you should not use the machine until the recall repairs have been completed. Terex will instruct you to lubricate the machine according to the maintenance manual and carry out the required routine maintenance.
- Other#2018051
34 units affected
On certain XT Pro 56 and 60 aerial devices, the platform control enable switch system may not have been adjusted correctly. This may allow the aerial device to rotate if the enable switch is not depressed and held while twisting the control stick. This could cause unintended movement of the aerial device, increasing the risk of injury to the operator. Correction: Dealers will inspect and adjust the enable switch system as necessary.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada