RECALLS — MAKE · MODEL · YEAR
2012 MCI E4500 recalls
6 safety recall campaigns have been filed for the 2012 MCI E4500 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 02
- U.S. recalls
- 04
- Total campaigns
- 06
Transport Canada recalls
02- Steering#2019006
177 units affected
Issue: Certain buses built with a rear tag-axle steering system may exhibit a steering lock-up at highway speed. Safety Risk: This problem could cause a sudden loss of steering control that could create the risk of a crash. Corrective Action: A final repair has not yet been determined. The cause of this problem is under investigation. In the interim, the company will notify owners by mail and advise them to immediately verify that the rear tag-axle caster adjustment is within specification.
- Other#2011377
245 units affected
On certain vehicles, specific operating conditions (such as tight, successive, highly banked curves in opposite directions), could trigger unintended Electronic Stability Control (ESC) system intervention. As a result, the ESC may unnecessarily apply one of the front brakes in order to correct the perceived oversteer condition. This may cause the vehicle to deviate from the intended path, thereby increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ESC module.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
04- STRUCTURE:BODY:DOOR#25V853000
Motor Coach Industries (MCI) is recalling certain 102DL3, 102D3, MC12PTV, E4500, D4000, 102D3ISTV, D4500, J4500, D4000ISTV, D4005, D4505, and J3500 transit buses. Please refer to MCI's recall report for specific model year information. The front door lower curb view glazing material is incorrect. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."
Risk: The incorrect window glazing material may reduce the driver's visibility, increasing the risk of a crash.
Remedy: MCI will replace the glass, free of charge. Owner notification letters were mailed February 4, 2026. Owners may contact MCI customer service at 1-800-241-2947. MCI's number for this recall is 22-005.
- STEERING:HYDRAULIC POWER ASSIST SYSTEM#19V027000
Motor Coach Industries (MCI) is recalling certain 2001-2015 J4500 and 1997-2013 102EL3/E4500 coaches equipped with a hydraulic rear axle (tag axle) steering system. The axle's alignment and low hydraulic pressure in the steering system may cause the steering system to lock, causing a loss of steering control at highway speeds.
Risk: Loss of steering control may increase the risk of a crash.
Remedy: MCI will inspect and repair axle alignment, as necessary, free of charge. MCI issued owners an interim notification on March 26, 2019. Owner notification letters were mailed on May 14, 2021. Owners may contact MCI customer service at 1-800-241-2947. MCI's number for this recall is SB 469.
- SEAT BELTS:FRONT:ANCHORAGE#14V172000
Motor Coach Industries (MCI) is recalling certain model year 2009-2014 E4500 and J4500 motorcoaches manufactured October 2008 through October 2013, and equipped with passenger seats with 3-point seat belts. The seat track for the second row passenger seats may be missing a weld at the end of the seat track where it enters the frame structure.
Risk: In the event of a crash, the seat may detach from its floor mounting, increasing the risk of injury to the occupant.
Remedy: MCI will notify owners, and dealers will modify the seat anchorage, free of charge. The recall began on May 9, 2014. Owners may contact MCI at 1-800-241-2947. MCI's number for this recall is 408.
- ELECTRONIC STABILITY CONTROL (ESC)#11V524000
MOTOR COACH INDUSTRIES (MCI) IS RECALLING CERTAIN MODEL YEAR 2003, AND 2007-2012 E AND J MODELS ALONG WITH MODEL YEAR 2007-2012 D4000, D4005, D4500, D4505, D4000ISTV MOTOR COACHES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) MODULES, MANUFACTURED FROM OCTOBER 2002, THROUGH OCTOBER 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.
Risk: IF THE DRIVER IS SLOW TO REACT DURING THIS ESC INTERVENTION, THE VEHICLE MAY DEVIATE FROM THE INTENDED LINE OF TRAVEL, INCREASING THE RISK OF A CRASH.
Remedy: MCI WILL NOTIFY OWNERS AND REPLACE THE CONTROL MODULE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 4, 2012. OWNERS MAY CONTACT MCI CUSTOMER SERVICE AT 1-800-241-2947.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2012 MCI E4500 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.