Rappels 2012 MCI E4500

• Direction#20190068 janvier 2019

  177 unités visées

  Problème : Certains autobus construits avec un système de direction doté d'un essieu trainé à l'arrière peuvent subir un blocage de la direction à grande vitesse. Risques pour la sécurité : Ce problème pourrait causer une perte soudaine de contrôle de la direction susceptible de provoquer une collision. Mesure corrective : Une réparation finale n'a pas encore été déterminée. Une enquête est en cours afin de déterminer la cause du problème. Entre-temps, l'entreprise va informer les propriétaires par la poste et leur demander de s'assurer immédiatement que l'ajustement de la roulette de l'essieu trainé arrière respecte les spécifications.

• Autres#201137721 octobre 2011

  245 unités visées

  Sur certains véhicules, des conditions de fonctionnement spécifiques (comme des courbes serrées, successives et très relevées dans des directions opposées) pourraient déclencher le système de contrôle électronique de la stabilité. En conséquence, le système de contrôle pourraient serrer inutilement l'un des freins avant afin de corriger le survirage perçu. Cela pourrait faire dévier le véhicule de la trajectoire prévue, ce qui augmenterait les risques d'accident, endommagerait des biens matériels ou blesserait quelqu'un. Correction : Les concessionnaires devront remplacer le module du système de contrôle de la stabilité.

Données canadiennes mises à jour : 24 août 2026

• STRUCTURE:BODY:DOOR#25V853000en anglais seulement10 décembre 2025

  Motor Coach Industries (MCI) is recalling certain 102DL3, 102D3, MC12PTV, E4500, D4000, 102D3ISTV, D4500, J4500, D4000ISTV, D4005, D4505, and J3500 transit buses. Please refer to MCI's recall report for specific model year information. The front door lower curb view glazing material is incorrect. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."

  Risque: The incorrect window glazing material may reduce the driver's visibility, increasing the risk of a crash.

  Correctif: MCI will replace the glass, free of charge. Owner notification letters were mailed February 4, 2026. Owners may contact MCI customer service at 1-800-241-2947. MCI's number for this recall is 22-005.

• STEERING:HYDRAULIC POWER ASSIST SYSTEM#19V027000en anglais seulement7 janvier 2019

  Motor Coach Industries (MCI) is recalling certain 2001-2015 J4500 and 1997-2013 102EL3/E4500 coaches equipped with a hydraulic rear axle (tag axle) steering system. The axle's alignment and low hydraulic pressure in the steering system may cause the steering system to lock, causing a loss of steering control at highway speeds.

  Risque: Loss of steering control may increase the risk of a crash.

  Correctif: MCI will inspect and repair axle alignment, as necessary, free of charge. MCI issued owners an interim notification on March 26, 2019. Owner notification letters were mailed on May 14, 2021. Owners may contact MCI customer service at 1-800-241-2947. MCI's number for this recall is SB 469.

• SEAT BELTS:FRONT:ANCHORAGE#14V172000en anglais seulement4 avril 2014

  Motor Coach Industries (MCI) is recalling certain model year 2009-2014 E4500 and J4500 motorcoaches manufactured October 2008 through October 2013, and equipped with passenger seats with 3-point seat belts. The seat track for the second row passenger seats may be missing a weld at the end of the seat track where it enters the frame structure.

  Risque: In the event of a crash, the seat may detach from its floor mounting, increasing the risk of injury to the occupant.

  Correctif: MCI will notify owners, and dealers will modify the seat anchorage, free of charge. The recall began on May 9, 2014. Owners may contact MCI at 1-800-241-2947. MCI's number for this recall is 408.

• ELECTRONIC STABILITY CONTROL (ESC)#11V524000en anglais seulement26 octobre 2011

  MOTOR COACH INDUSTRIES (MCI) IS RECALLING CERTAIN MODEL YEAR 2003, AND 2007-2012 E AND J MODELS ALONG WITH MODEL YEAR 2007-2012 D4000, D4005, D4500, D4505, D4000ISTV MOTOR COACHES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) MODULES, MANUFACTURED FROM OCTOBER 2002, THROUGH OCTOBER 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.

  Risque: IF THE DRIVER IS SLOW TO REACT DURING THIS ESC INTERVENTION, THE VEHICLE MAY DEVIATE FROM THE INTENDED LINE OF TRAVEL, INCREASING THE RISK OF A CRASH.

  Correctif: MCI WILL NOTIFY OWNERS AND REPLACE THE CONTROL MODULE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 4, 2012. OWNERS MAY CONTACT MCI CUSTOMER SERVICE AT 1-800-241-2947.