RECALLS — ISUZU FTR
Isuzu FTR recalls
Isuzu FTR model years 2018–2026 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
08- Suspension#2025577
582 units affected
Issue: On certain trucks, the front stabilizer bar brackets may not have been manufactured properly. As a result, the bracket(s) could break and the stabilizer bar could detach from the truck. Safety Risk: Parts that detach from the truck could create a hazard for other road users and increase the risk of a crash. Corrective Actions: To reduce the safety risk, Isuzu advises you to inspect the front stabilizer bar before driving until the recall repairs have been completed. Isuzu will notify owners by mail and advise you to take your truck to a dealership to remove or replace the stabilizer bar, stabilizer bar brackets, leaf spring assemblies and/or stabilizer plates, as necessary.
- Fuel System#2025493
497 units affected
Issue: On certain trucks, the electric fuel heater could overheat. As a result, the fuel heater housing could melt, and fuel could leak into the connector. If this happens, the connection terminals could overheat and melt. Note: This problem could cause the engine not to start or to have trouble starting. Safety Risk: A fuel leak and/or a connector that overheats and melts can increase the risk of a fire. Corrective Actions: Isuzu will notify owners by mail and advise you to take your truck to a dealership to replace the electric fuel heater. The dealer will also inspect and, if necessary, repair any damaged connector.
- Electrical#2024134
14 units affected
Issue: On certain trucks, the wiring for the Mobileye camera may have been routed incorrectly. As a result, the wiring could become damaged by contact with dash components and could overheat and melt. If this happens, the turn signals and hazard lights may not work properly, and the Mobileye collision avoidance information would not be displayed. Safety Risk: Wiring that overheats and melts can create the risk of a fire. Turn signals that don't work may cause a person not to recognize when a driver intends to turn or change lanes. Hazard lamps that don't work could make the vehicle less visible. Both issues could increase the risk of a crash. Additionally, a collision avoidance system that doesn't work properly could increase the risk of a crash. Corrective Actions: Isuzu will notify owners by mail and advise you to take your truck to a dealership to inspect the Mobileye camera cable. It will be re-routed or replaced, as necessary.
- Steering#2021679
85 units affected
Issue: On certain vehicles, the jam nut for the steering stopper bolt on the left-front knuckle may loosen and allow the bolt to back away from the knuckle. This could result in an increase in the turning radius of the vehicle in left turns. A change in turning radius could make it difficult to make sharp turns. Note: This recall replaces V1902 (Transport Canada recall 2019-306). Vehicles that were repaired under that recall also require this repair. Safety Risk: If a vehicle's turning radius is increased, there could be an increased risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the jam nuts on the steering stopper bolts with new Spiralock nuts. The bolts and extensions will also be cleaned and/or replaced, as necessary.
- Electrical#2020143
10 units affected
Issue: On certain trucks, the wire harness from the relay box was not properly routed. As result, the wire harness could be damaged by contact with the leaf spring hanger bracket. If this happens, the engine could stall. This can also cause the anti-lock brake system (ABS) not to work properly. A damaged wire harness could also cause a short circuit. Safety Risk: A sudden loss of engine power could create the risk of a crash. Additionally, a loss of ABS could also increase the risk of a crash. In addition, a short circuit could create the risk of fire. Corrective Actions: Isuzu will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the wire harness for damage. If necessary, it will be replaced. Additional clamps will be installed to move the harness away from the leaf spring hanger bracket.
- Electrical#2019452
498 units affected
Issue: The main power wire to the relay box may have a loose connection. This could cause the wire to overheat or melt, and result in a loss of electrical power to the vehicle. Safety Risk: A loss of electrical power to the vehicle could result in an engine stall and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to an authorized service center to inspect the main power wire bolt. If excess insulation is found, it will be trimmed and the bolt will be properly tightened. If the wire harness and/or relay box are damaged, they will be repaired or replaced.
- Steering#2019306
65 units affected
Issue: On certain vehicles, the jam nut for the steering stopper bolt on the left-front knuckle may loosen and allow the bolt to back away from the knuckle. This could result in an increase in the turning radius of the vehicle in left turns. A change in turning radius could make it difficult to make sharp turns. Safety Risk: If a vehicle's turning radius is increased, there could be an increased risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to replace the jam nuts on the steering stopper bolts. The nuts will be tightened and Loctite will be applied to the nut and bolt. If a bolt is found damaged or missing, the assembly will be replaced.
- Structure#2018590
64 units affected
On certain F-Series cab-forward trucks, there may be insufficient warning to the operator when the locking lever that secures the cab is left unlatched after servicing or maintenance. If a driver does not ensure the cab is properly latched before driving, the cab may tilt unintentionally, increasing the risk of a crash causing injury and/or damage to property. Correction: Isuzu will remind owners of the need to secure the cab locking lever and will provide further measures, including additional warning features and an additional label and updates to the owner’s manuals.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada