RECALLS — MAKE · MODEL · YEAR
2016 Ford Mustang recalls
12 safety recall campaigns have been filed for the 2016 Ford Mustang with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 07
- U.S. recalls
- 05
- Total campaigns
- 12
Transport Canada recalls
07- Seats And Restraints#2025484
21,803 units affected
Issue: On certain vehicles, the driver and passenger-front seat belt pretensioner cable could corrode over time. As a result, the cable could break and the seat belt may not hold a person during a crash. Safety Risk: A seat belt that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the seat belt(s). The dealer will also modify the floor covering around the seat belt anchor pretensioner cables.
- Visual System#2025449
122,125 units affected
Issue: On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse. Note: For certain models, this recall also affects incomplete vehicles. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the rearview camera.
- Seats And Restraints#2024605
900 units affected
Issue: Ford Motor Company of Canada is conducting a parts recovery campaign targeting a random sample of 2015-2017 Ford Mustang vehicles in the Montreal area built between February 11, 2014 and October 2, 2017. The driver and front passenger seat belt assemblies are being recovered to aid in Ford's analysis in support of Transport Canada defect investigation file no. 3280-38-20. Note: This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: No safety defect has been identified with these seat belts. Corrective Actions: Ford will notify select owners by mail and advise them to take their vehicle to a dealership to replace the driver and front passenger seat belts at no charge.
- Visual System#2022070
22,989 units affected
Issue: On certain vehicles, opening and closing the trunk lid could damage the wiring for the rearview camera. If this happens, the rearview camera image may not display properly when you shift to reverse. Also, there could be a problem with the connections inside the rearview camera. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rearview camera and/or inspect and repair the decklid wiring.
- Brakes#2020647
99 units affected
This equipment recall is for replacement parts that were sold or installed by Ford dealerships between October 2019 and August 2020. This recall is not being conducted under the requirements of the Motor Vehicle Safety Act. Issue: On certain cars, the brake pedal and bracket assembly could fracture if rapid and forceful pressure is applied to the brake pedal, as typically seen during track and competition driving. If this happens, there could be a loss of braking. Note: This equipment recall only affects the following brake pedal and bracket assembly part numbers: FR3Z-2455-AA FR3Z-2455-AB Safety Risk: A loss of brakes can create the risk of a crash. Corrective Actions: Ford will notify its dealers of this recall. While dealers will attempt to contact people who may have purchased a part affected by this recall, if you have had the brake pedal and bracket assembly replaced on your car, you should contact the dealer that sold or installed it to find out if it is affected by this recall. Any part that is affected by this recall will be replaced, free of charge.
- Engine#2016527
941 units affected
On certain vehicles equipped with 5.2 litre V8 engines, the engine oil cooler tube assembly may have insufficient crimps. This could lead to a hose separating, which would cause an oil leak. The sudden loss of engine oil could result in an engine failure causing a loss of motive power, and an oil leak, in the presence of an ignition source could result in a fire. Both of these conditions could increase the risk of injury and/or property damage. Correction: Dealers will replace the engine oil cooler tube assembly.
- Seats And Restraints#2015508
1 units affected
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standards (CMVSS) 210.1 - User-ready Tether Anchorages for Restraint Systems and (CMVSS) 209 – Seat Belt Assemblies. Front and rear seat belts may have been damaged prior to installation and may fail to conform to CMVSS 209 assembly performance standards, and the strength requirements of the CMVSS 210.1 standard. These issues could result in the belts not adequately restraining occupants in a crash, increasing the risk of injury and/or damage to property. Correction: Dealers will replace both front seatbelt retractors and pretensioners as well as both rear seatbelt retractors, rear seatbelt buckles, and rear child safety seat tether anchors.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
05- SEAT BELTS:PRETENSIONER#25V614000
Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. Water and road salt may corrode the front seat belt anchor pretensioner cables.
Risk: A corroded cable can break, preventing the seat belt from properly restraining an occupant, and increasing the risk of injury during a crash.
Remedy: Dealers will inspect and replace both front seat belt anchor pretensioner assemblies, as necessary. In addition, dealers will remove sections of the carpet and underlayment that contact the cables. Dealers will also inspect the A-pillar sealing patches, and as necessary, install A-pillar body plugs, and/or inspect and replace the front outboard seat bolts. Repairs will be performed free of charge. Interim letters, notifying owners of the safety risk, were mailed October 20, 2025. Additional letters will be sent once the final remedy is available, anticipated December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S92. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov September 17, 2025.
- BACK OVER PREVENTION: SENSING SYSTEM: CAMERA#25V572000
Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
Risk: A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.
- BACK OVER PREVENTION: SENSING SYSTEM: CAMERA#22V082000
Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. The rearview camera wiring may be loose or damaged, which can result in a blank or distorted image.
Risk: A rearview camera that displays a blank or distorted image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will inspect and repair the decklid wiring harness and/or replace the rearview camera, as necessary, free of charge. Owner notification letters were mailed December 23, 2022 and June 26, 2023. Remedy parts are expected to become available in the 4th Quarter of 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S06.
- ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS#16V779000
Ford Motor Company (Ford) is recalling certain model year 2015-2017 Mustang vehicles manufactured February 24, 2015, to August 30, 2016. A hose may separate from the engine oil cooler tube assembly causing an oil leak.
Risk: A sudden loss of engine oil may cause engine failure, increasing the risk of a crash. Additionally, an oil leak, in the presence of an ignition source, increases the risk of a fire.
Remedy: Ford will notify owners, and dealers will replace the engine oil cooler tube assembly, free of charge. The recall began on March 23, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S40.
- SEAT BELTS#15V707000
Ford Motor Company (Ford) is recalling certain model year 2016 Ford Mustang vehicles manufactured September 26, 2015, to October 1, 2015. The front and rear seat belts and child seat tether anchors may have been damaged in shipping from the supplier to the vehicle assembly plant and may not adequately restrain the occupant in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 225, "Child restraint anchorage systems."
Risk: If the restraint components do not function as intended, the occupants may not be properly restrained in the event of a crash, increasing their risk of injury.
Remedy: Ford will notify owners, and dealers will replace the front and rear seat belt assemblies and the child seat tether anchors, free of charge. The recall began on December 18, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15C13.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2016 Ford Mustang VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.