RECALLS — MAKE · MODEL · YEAR
2016 Volvo VNM recalls
8 safety recall campaigns have been filed for the 2016 Volvo VNM with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 03
- U.S. recalls
- 05
- Total campaigns
- 08
Transport Canada recalls
03- Steering#2016077
2,809 units affected
On certain vehicles manufactured with a 2-piece steering shaft, the lower or upper steering shaft may disconnect from the coupler. Separation would result in complete loss of steering, increasing the risk of a crash causing injury and/or damage to property. Correction: As an interim measure, dealers will drill a hole through the steering shaft and install a roll pin. When parts become available, dealers will replace the 2-piece steering shaft with a one piece shaft. Note: This recall supersedes recall 2015-561. Vehicles repaired under the previous recall will require re-inspection and potential repair.
- Steering#2016076
503 units affected
On certain vehicles, a defect in the ball joint seals on the drag link could allow corrosion to form in the joint, leading to accelerated wear. This could result in ball joint failure, potentially resulting in a loss of steering control which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the drag link on affected vehicles. Note: This is an expansion of recall 2015-466.
- Steering#2015561
2,001 units affected
On certain vehicles manufactured with a 2-piece steering shaft, the bolt torque on the joint that couples the upper and lower steering shaft could be lower than specification. This could cause the bolt to loosen, which may result in separation of the two shafts. Separation of the two shafts would result in complete loss of steering, increasing the risk of a crash causing injury and/or damage to property. Correction: Instructions will be sent to owners advising them to tighten the bolt as an interim measure. Dealers will inspect the steering shaft, and affect repairs as necessary. Note: this recall is superseded by recall 2016-077. Please see recall 2016-077 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016077">Click here for more information</a>
Canadian data updated August 24, 2026
U.S. NHTSA recalls
05- STEERING#17V536000
Volvo Trucks North America (Volvo) is recalling certain 2016 Volvo VNL and VNM trucks equipped with certain Dana Spicer D-Series and E-Series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
Risk: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering, increasing the risk of a crash.
Remedy: Volvo will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. The recall began on October 17, 2017. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1702.
- SERVICE BRAKES, AIR#16V928000
Volvo Trucks North America (Volvo) is recalling certain model year 2013-2017 VNL and VNM trucks and certain model year 2017 VNX trucks. In the affected vehicles, incorrect software for controlling the electronic air dryer may result in oil and water contaminating the brake system.
Risk: If the brake system becomes contaminated, braking performance could be affected, increasing the risk of a crash.
Remedy: Volvo will notify owners, and dealers will reprogram the vehicle control module and replace the air dryer filter, free of charge. The recall began on February 16, 2017. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1608.
- SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT#16V095000
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2010 VT trucks manufactured from April 9, 2008, through September 24, 2009, and certain 2016 model VNL and VNM trucks manufactured from January 2, 2015, through to November 6, 2015. The affected vehicles are equipped with USK non-greasable drag links that may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint.
Risk: Failure of the ball joint may cause separation of the socket and a complete loss of steering, increasing the risk of a crash.
Remedy: Volvo will notify owners, and dealers will replace the drag links, free of charge. The recall began on April 21, 2016. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1601. Note: This recall is an expansion of a previous recall 15V-651.
- STEERING#16V097000
Volvo Trucks North America (Volvo) is recalling certain model year 2016-2017 VNL, VNX, and VNM trucks manufactured from May 11, 2015, through April 18, 2016. The trucks may have been manufactured without a roll pin on the steering shafts. If the roll pin is missing, the lower steering shaft may disconnect from the junction block. Also, the bolt connecting the upper steering shaft to the lower steering shaft may not have been properly tightened. Either condition can lead to separation of the steering shaft.
Risk: Separation of the steering shaft will result in complete loss of steering which may lead to a vehicle crash.
Remedy: Volvo is strongly recommending that the affected vehicles not be driven until the interim remedy is applied. An interim notice was sent to Volvo owners on March 16, 2016, and an interim repair is available now. A second notice was mailed on May 13, 2016. The final remedy is now available. Both remedies are free of charge. Owners may contact Volvo customer service at 1-877-800-4945 opt #1. Volvo's recall numbers for this campaign are RVXX1602 and RVXX1603. This recall supersedes safety recall 15V-786.
- ENGINE AND ENGINE COOLING:ENGINE#15V274000
Volvo Trucks North America (Volvo) is recalling certain model year 2012-2016 VNM trucks manufactured March 21, 2011, to April 30, 2015. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.
Risk: If engine oil comes into contact with a hot surface, there could be an increased risk of a fire.
Remedy: Volvo will notify owners, and dealers will secure the ends of the 90-degree elbow. In addition, the electronic control module (ECM) will be reprogrammed with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 12, 2015. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1502.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2016 Volvo VNM VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.