Does the 2012 Triumph Daytona 675 have any recalls?

Transport Canada lists 5 campaigns and the U.S. NHTSA lists 4 for the 2012 Triumph Daytona 675. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2012 Triumph Daytona 675?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2012 Triumph Daytona 675 recalls

9 safety recall campaigns have been filed for the 2012 Triumph Daytona 675 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 05
U.S. recalls: 04
Total campaigns: 09

Transport Canada recalls

Brakes#2013257July 29, 2013
237 units affected
On certain motorcycles, the Anti-Lock Brake System (ABS) modulator may have been manufactured incorrectly and could fail. Loss of ABS function would allow the front and/or rear wheel to lock under braking which, in conjunction with traffic and road conditions, and the rider’s reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ABS modulator.
Other#2013171May 21, 2013
61 units affected
On certain motorcycles, the throttle cable guide was omitted during vehicle assembly. As a result, the throttle cables could become trapped in the steering stop, which could prevent the throttle from opening and closing normally. This could result in a loss of vehicle propulsion, or make it difficult to slow or stop the vehicle. Either issue could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will install a throttle cable guide. Also, the throttle cables will be inspect and replaced if necessary.
Lights And Instruments#2013089March 21, 2013
413 units affected
On certain motorcycles, supports for the front and rear turn signal lamps were manufactured incorrectly and could break, causing the lamp assemblies to hang from their electrical wires. As a result, the driver’s intentions to turn may not be conveyed clearly to other road users, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the turn signal lamp assemblies.
Wheels#2013027January 29, 2013
41 units affected
On certain motorcycles, wheel bearings from an unapproved supplier were installed during the manufacturing process. Confidence in the bearing is low since Triumph has no details regarding the bearing supplier, or its quality controls and standards. The durability and performance of these bearings is thereby unknown. Bearing failure could cause a crash resulting in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the wheel bearings.
Electrical#2011365October 11, 2011
145 units affected
On certain motorcycles, the wiring harness for the evaporative purge valve could contact the exhaust and become damaged. This could result in an electrical short, which could cause the Engine Control Module fuse to fail, and the engine to stall. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road condition, and the rider's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, reposition the wire harness.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP#13V319000July 22, 2013
Triumph Motorcycles is recalling certain model year 2012-2013 Street Triple and Street Triple R motorcycles manufactured in July 2012; and model year 2012-2013 Daytona 675 and Daytona 675 R motorcycles manufactured September 2012 through June 2013. Due to a manufacturing error, the Anti-Lock Brake System (ABS) may malfunction and lose anti-lock functionality.
Risk: The anti-lock function may not perform properly allowing for wheel lock up and skidding, increasing the risk of a crash.
Remedy: Triumph will notify owners and dealers will replace the ABS modulator, free of charge. The recall began during August 2013. Owners may contact Triumph at 1-888-283-5288.
STEERING: STEERING WHEEL/HANDLE BAR#13V215000May 21, 2013
Triumph Motorcycles (Triumph) is recalling certain model year 2012 Street Triple motorcycles manufactured from June 2012 through November 2012; and model year 2012 Daytona 675 motorcycles manufactured July 2012 through October 2012. The motorcycles may have been assembled without a guide for the throttle cables.
Risk: Without the guide, the cables may move freely and become trapped in the steering stop, impeding the steering operation and affecting the driver's ability to control the motorcycle, increasing the risk of a crash.
Remedy: Triumph will notify owners, and dealers will install a throttle cable guide free of charge. The recall began on May 30, 2013. Owners may contact Triumph at 1-678-854-2010 for more information.
EXTERIOR LIGHTING:TURN SIGNAL#13V104000March 22, 2013
Triumph Motorcycles (Triumph) is recalling certain model year 2012-2013 Daytona 675, Street Triple, Speed Triple, and Tiger 800 motorcycles. Due to a manufacturing error, the turn signal stems on the front and rear of the motorcycle may fracture.
Risk: If the turn signal stems break, the turn signals may not be visible to other vehicles on the road, increasing the risk of a vehicle crash.
Remedy: Triumph will notify owners and dealers will replace the turn signal stems, free of charge. The recall began on March 26, 2013. Owners may contact Triumph at 1-678-854-2010 for more information.
WHEELS#13V032000January 29, 2013
Triumph Motorcycles (Triumph) is recalling certain model year 2011-2012 Daytona 675 and Street Triple motorcycles and 2012 Thunderbird and Thunderbird Storm motorcycles. The wheels were assembled with bearings of an unknown quality.
Risk: Wheel bearings of poor quality could fail unexpectedly, increasing the risk of a motorcycle crash.
Remedy: Triumph will notify owners, and dealers will replace the affected bearings free of charge. Owners may contact Triumph at 1-678-854-2010 for more information.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2012 Triumph Daytona 675 VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →