2022 Toyota Sienna Hybrid recalls

• Seats And Restraints#2026003January 5, 2026

  54 units affected

  Issue: On certain vehicles converted for wheelchair access by Vantage Mobility, the wheelchair tie-down retractors may not have been manufactured properly. As a result, the retractor(s) may not lock automatically. If this happens, the wheelchair may not be secured correctly and could move in a crash. Note: This recall only affects certain Q'Straint QRT-DELUXE and QRT-MAX wheelchair retractors with the part number Q8-6200 or Q8-6209. Safety Risk: A wheelchair that moves in a crash could increase the risk of injury. Corrective Actions: To reduce the safety risk, Vantage Mobility recommends you confirm the wheelchair is secured properly by attempting to move it before driving until the recall repairs have been completed. Vantage Mobility will notify owners by mail and advise you to take your vehicle to a Vantage Mobility service center to inspect and, if necessary, replace the wheelchair retractor(s).

• Seats And Restraints#2025070February 13, 2025

  17,686 units affected

  Issue: On certain vehicles, the bolts that secure the third-row seats may not have been tightened properly. As a result, the seats could move in a crash. Safety Risk: A seat that moves in a crash could increase the risk of injury. Corrective Action: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to tighten the bolts for the third-row seats.

• Brakes#2022179April 13, 2022

  41,084 units affected

  Issue: Under certain conditions, the vehicle stability control (VSC) system may not switch on when the ignition is restarted. This can happen if the driver manually turns off the VSC, depresses the brake pedal, and then turns off and restarts the vehicle while continuously depressing the brake pedal. Canadian regulations require the stability control system to be active each time that you start the vehicle. Safety Risk: A stability control system that is switched off could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to update the skid control ECU software.

• Seats And Restraints#2021703November 17, 2021

  73 units affected

  Issue: On certain vehicles, the seat belts for the second-row outboard seats may have an incorrect D-ring. As a result, the seat belt could bunch up and tear in a crash. Safety Risk: A seat belt that breaks in a crash could create an increased risk of injury. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to replace the second-row outboard seat belt assemblies.

Canadian data updated August 24, 2026

• EQUIPMENT ADAPTIVE/MOBILITY:WHEELCHAIR RESTRAINTS/SECUREMENT:LATCH/ANCHOR:#25V877000December 17, 2025

  Vantage Mobility, LLC (VM) is recalling certain 2021-2026 Honda Odyssey, 2021-2025 Chrysler Pacifica, and Toyota Sienna vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. The retractors may not lock, preventing the wheelchair from being properly secured.

  Risk: An unsecured wheelchair can move during transit, increasing the risk of injury.

  Remedy: Dealers will inspect and replace the retractors, free of charge. Owner notification letters was mailed January 27, 2026. Owners may contact Vantage Mobility customer service at 1-800-488-9082.

• SEATS:MID/REAR ASSEMBLY:RECLINER#25V086000February 13, 2025

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2021-2025 Sienna Hybrid vehicles. The bolts for the seatbacks on the third-row seat assemblies may not be tightened properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 202, "Head Restraints," 207, "Seating Systems," and 225, "Child Restraint Anchorage Systems."

  Risk: An improperly tightened seatback may not adequately restrain the occupant during a crash, increasing their risk of injury.

  Remedy: Dealers will tighten the seat assembly bolts, free of charge. Owner notification letters were mailed April 1, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 25TA05.

• ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE#22V239000April 13, 2022

  Toyota Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus LX 600, Lexus NX 350h, Lexus NX 450h+, Toytoa RAV4 Hybrid, 2021-2022 Lexus LS 500h, Toyota Mirai, RAV4 PRIME, Sienna, Venza, and 2020-2022 Toyota Highlander Hybrid vehicles. The Skid Control ECU software may not turn on the Vehicle Stability Control (VSC) system when the vehicle is restarted after the driver has disabled the VSC system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."

  Risk: Driving with a deactivated stability control system increases the risk of a crash.

  Remedy: Dealers will update the Skid Control ECU software, free of charge. Owner notification letters were mailed May 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA03. Lexus' number for this recall is 22LA01.

• SEAT BELTS:REAR/OTHER:ANCHORAGE#21V889000November 17, 2021

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Sienna vehicles equipped with seating for eight passengers. An incorrect seat belt webbing guide may have been installed on the outboard second-row seat belt assemblies.

  Risk: During seat belt pre-tensioner deployment, the incorrect webbing guide may damage the seat belt webbing, causing it to tear and increasing the risk of injury during a crash.

  Remedy: Dealers will replace the outboard second-row seat belt assemblies, free of charge. Owner notification letters were mailed January 10, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB08 and 21TA08.