2010 RAM 1500 recalls

• Other#2019420August 21, 2019

  5,327 units affected

  Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

• Fuel System#2018122March 9, 2018

  105,028 units affected

  On certain vehicles, the front fuel tank strap may become loose or detached due to corrosion of the frame bracket. This could result in the front of the fuel tank to lower, potentially allowing the front of the tank to make contact with the ground, which could increase the risk of a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will install a reinforcement bracket onto the frame.

• Powertrain#2017659December 21, 2017

  290,200 units affected

  On certain vehicles equipped with a steering column gear shifter, the brake transmission shift interlock (BTSI) may become inoperative. This could allow the steering column gear shifter lever to be shifted out of the PARK (P) position without depressing the service brake pedal or having the key in the ignition, which could result in unintended vehicle movement, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace the BTSI as necessary. The Body Control Module (BCM) will also be updated.

• Airbag#2016265May 27, 2016

  459,492 units affected

  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

• Airbag#2015228May 27, 2015

  374,508 units affected

  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2015-003. Correction: Dealers will replace airbag inflators. All vehicles having received a replacement inflator as part of the previous special service campaign will have a replacement inflator installed.

• Fuel System#2014449October 9, 2014

  59,432 units affected

  On certain vehicles equipped with 6.7L diesel engines, an electrical connection at the fuel heater could overheat, potentially rendering the heater inoperative and causing a fuel leak and fuel odour. Fuel leakage, in the presence of an ignition source, could result in a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel heater, and replace it if required, as well as replace the fuel heater wiring harness electrical connector.

• Steering#2013397November 7, 2013

  48,517 units affected

  On certain 2008-2012 Ram 2500 and 3500 4x4, Ram 3500 cab chassis, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: Dealers will install a redesigned left outer tie rod assembly. Note: This recall supersedes recall 2011-253 (L16). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.

• Steering#2013396November 7, 2013

  6,674 units affected

  Certain Ram 4500 and 5500 four wheel drive vehicles may experience a fracture of the ball stud on the left outer tie rod assembly, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: As an interim repair, dealers will align the left tie rod end. Dealers will install a redesigned left outer tie rod assembly once parts are available. Note: This recall supersedes recall 2010-465 (K28). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.

• Powertrain#2013044February 6, 2013

  63,201 units affected

  On certain vehicles, the rear axle pinion nut could loosen and allow the rear driveshaft to detach from the axle, or fully detach from the vehicle. Pinion nut separation could also cause the rear axle differential to fail suddenly, causing rear wheel lockup. These issues could result in loss of propulsion, danger to other road users, loss of vehicle control and possible crash causing property damage and/or personal injury. Correction: Dealers will install a pinion nut retainer.

• Powertrain#2012327September 27, 2012

  15,432 units affected

  On certain vehicles built between July 1, 2009 and November 30, 2009, the rear axle pinion nut may have been incorrectly manufactured and could loosen. If the pinion nut was to separate from the pinion, the rear driveshaft could become detached from the rear axle, or fully detached from the vehicle. Pinion nut separation could also cause the rear axle differential to fail suddenly, causing rear wheel lockup. These issues could result in loss of propulsion, danger to other road users, loss of vehicle control and possible crash causing property damage and/or personal injury. Correction: Dealers will install a pinion nut retainer.

• Steering#2011253July 14, 2011

  49,800 units affected

  On certain 2008-2011 Ram 2500 and 3500 4x4, Ram 3500 cab chassis 4x2 and 4x4, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture. Additionally, other 2003-2008 Ram vehicles may have received the affected tie rod as a replacement part during service, and are therefore also involved in this campaign. Although this condition tends to occur when making a tight turn during low speed parking lot type maneuvers, tie rod failure could result in a loss of directional stability. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the left outer tie rod end and tighten the track bar bolt. Note: The tie rod replacement portion of this recall was superseded by recall 2013-396.

• Steering#2010465December 24, 2010

  3,236 units affected

  Certain Ram 4500 and 5500 vehicles may experience a weakening and fracture of the ball stud on the left outer tie rod assembly. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the left outer tie rod assembly.

• Brakes#2010438December 9, 2010

  13,000 units affected

  On certain vehicles equipped with a diesel engine and hydroboost brake system (which utilizes the power steering system pressure for brake assist), the power steering reservoir cap may have excessive vent pressure levels, which could result in a brake pedal that is slow to return once depressed. This could increase brake light illumination times and cause confusion to a following road user which, in conjunction with traffic, road conditions and driver's reactions, may result in a crash. Correction: Dealers will replace the power steering reservoir cap.

• Brakes#2010223July 7, 2010

  3,481 units affected

  Certain vehicles may have an improperly formed master cylinder to hydraulic control unit brake tube assembly end-flare that could lead to a loss of brake fluid and reduced braking performance. This could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will replace the suspect brake tubes.

• Other#2010151May 10, 2010

  8,902 units affected

  Certain vehicles equipped with automatic transmission may have been built with a Wireless Ignition Node (WIN) module exhibiting a binding condition of the solenoid latch. This may result in a condition where the Ignition key can be removed from the WIN module prior to placing the shifter in PARK. This could result in unintended vehicle movement, which may cause property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the WIN module.

• Brakes#2010009January 19, 2010

  3,514 units affected

  On certain vehicles, the brake booster input rod may have been installed without the retaining clip, or in some cases, with an improperly formed retaining clip. Should the input rod separate from the assembly it could lead to a loss of brakes, which could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will install or replace the retaining clips.

Canadian data updated August 24, 2026

• FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING#18V160000March 8, 2018

  Chrysler (FCA US LLC) is recalling certain 2009-2012 Dodge Ram 1500 trucks currently, or ever registered, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. Exposure to environmental conditions such as water mixed with road salt may cause the front fuel tank strap frame "T-Slot" bracket to corrode, possibly causing the fuel tank to drop and make contact with the ground.

  Risk: If the fuel tank were to drop and contact the ground, a fuel leak may result. Additionally, in the event of a crash, the fuel tank may not remain secured to the vehicle, possibly causing a fuel leak. A fuel leak in the presence in an ignition source, can increase the risk of a fire.

  Remedy: Chrysler will notify owners and dealers will bolt a bracket reinforcement to the frame, free of charge. The recall began May 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U04.

• POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT#17V821000December 20, 2017

  Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.

  Risk: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.

  Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.

• POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT#13V038000February 6, 2013

  Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange.

  Risk: If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.

  Remedy: On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.

• POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT#12V474000October 2, 2012

  Chrysler is recalling certain model year 2009-2010, Ram 1500 and Dodge Dakota trucks, manufactured from July 1, 2009, through November 30, 2009, because the rear axle pinion nut may loosen due to a lack of adhesive.

  Risk: If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.

  Remedy: Chrysler will notify owners, and dealers will install a pinion nut retainer, free of charge. The recall began on June 17, 2013. Owners may contact Chrysler at 1-800-247-9753.

• STEERING:LINKAGES:TIE ROD ASSEMBLY#10V657000December 24, 2010

  CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 4500 AND 5500 VEHICLES. THESE VEHICLES MAY EXPERIENCE A WEAKENING AND FRACTURE OF THE LEFT BALL STUD ON THE TIE ROD RESULTING IN THE POTENTIAL LOSS OF STEERING.

  Risk: LOSS OF STEERING CONTROL OF THE VEHICLE COULD INCREASE THE RISK OF A CRASH.

  Remedy: CHRYSLER WILL NOTIFY OWNERS AND REPLACE THE LEFT OUTER TIE ROD FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 7, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

• STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID#10V616000December 7, 2010

  CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010-2011 DODGE RAM TRUCKS MANUFACTURED FROM MARCH 2009 THROUGH OCTOBER 2010. SOME VEHICLES EQUIPPED WITH DIESEL ENGINE AND A HYDROBOOST BRAKE SYSTEM MAY BE EQUIPPED WITH A POWER STEERING RESERVOIR CAP WITH EXCESSIVE VENT PRESSURE LEVELS THAT MAY RESULT IN BRAKE PEDALS THAT ARE SLOW TO RETURN.

  Risk: BRAKE LIGHTS THAT ARE SLOW TO EXTINGUISH COULD INCREASE THE RISK OF A CRASH.

  Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE POWER STEERING RESERVOIR CAP FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING FEBRUARY 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

• SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER#10V315000July 7, 2010

  CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 LEFT HAND DRIVE JEEP LIBERTY, DODGE NITRO AND RAM 1500 TRUCK; RIGHT AND LEFT HAND DRIVE JEEP WRANGLER VEHICLES. THESE VEHICLES MAY HAVE BEEN BUILT WITH AN IMPROPERLY FORMED MASTER CYLINDER TO HYDRAULIC CONTROL UNIT (HCU) BRAKE TUBE ASSEMBLY END FLARE.

  Risk: THIS COULD LEAD TO LOSS OF BRAKE FLUID AND REDUCED BRAKING PERFORMANCE INCREASING THE RISK OF A CRASH.

  Remedy: DEALERS WILL REPLACE THE BRAKE TUBES FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING AUGUST 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.

• ELECTRICAL SYSTEM:IGNITION:MODULE#10V200000May 11, 2010

  CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER 300, DODGE CHALLENGER, CHARGER, JEEP COMMANDER, GRAND CHEROKEE AND DODGE RAM VEHICLES. THESE VEHICLES MAY HAVE BEEN BUILT WITH A WIRELESS IGNITION NODE (WIN) MODULE EXHIBITING A BINDING CONDITION OF THE SOLENOID LATCH.

  Risk: THE RESULT OF THE DEFECT COULD LEAD TO A CONDITION WHERE THE KEY MAY BE REMOVED FROM THE IGNITION SWITCH (WIN MODULE) PRIOR TO PLACING THE SHIFTER IN PARK. THIS COULD RESULT IN THE POTENTIAL FOR UNINTENDED VEHICLE MOVEMENT AND COULD INCREASE THE RISK OF A CRASH.

  Remedy: DEALERS WILL INSPECT AND REPLACE THE WIN MODULE FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE AUGUST 23, 2010. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

• SERVICE BRAKES, HYDRAULIC#10V009000January 11, 2010

  CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER SEBRING; DODGE AVENGER AND NITRO; JEEP LIBERTY, COMMANDER AND GRAND CHEROKEE; AND MODEL YEAR 2009-2010 DODGE RAM TRUCK. THESE VEHICLES MAY HAVE BEEN BUILT WITH AN IMPROPERLY FORMED OR MISSING BRAKE BOOSTER INPUT ROD RETAINING CLIP.

  Risk: THIS COULD RESULT IN BRAKE FAILURE WITHOUT WARNING WHICH COULD CAUSE A CRASH.

  Remedy: CHRYSLER WILL REPLACE THE BRAKE BOOSTER INPUT ROD RETAINING CLIP FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING FEBRUARY 2010. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.