RECALLS — MAKE · MODEL · YEAR
2024 Peterbilt 367 recalls
6 safety recall campaigns have been filed for the 2024 Peterbilt 367 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 01
- U.S. recalls
- 05
- Total campaigns
- 06
Transport Canada recalls
01- Steering#2024732
14 units affected
Issue: On certain trucks, the bolts for the steering arm and/or tie rods may not have been tightened properly. As a result, the bolts could loosen and separate. If this happens, there could be a loss of steering control. Note: This recall only affects certain trucks equipped with 20k steer axles. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to replace the affected bolts and tighten them properly.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
05- SERVICE BRAKES, AIR:ANTILOCK:MODULATOR#25V353000
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 2026 Peterbilt 548, 589, and 2024-2026 Peterbilt 567 trucks. The rear brake piping assembly may have insufficient clearance, which can result in a loss of service brakes or anti-lock brake function.
Risk: Brake failure can increase the risk of a crash.
Remedy: Dealers will install new brake hoses and correct the rear brake piping assembly, free of charge. Owner letters were mailed September 8, 2025. Owners may contact Peterbilt's customer service at 1-940-591-4220. PACCAR's number for this recall is 25PBE.
- SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE#24V915000
PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
Risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.
- STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM#24V908000
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 548, Kenworth T480, T800, 2024-2025 Peterbilt 520, 567 and Kenworth T880 vehicles with PACCAR 20k steer axles. The steering arm and/or tie rod bracket fasteners may fail, resulting in a loss of steering control.
Risk: A loss of steering control increases the risk of a crash.
Remedy: Dealers will install new correctly torqued fasteners, free of charge. Owner notification letters were mailed January 21, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 or Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWK and 24PBK.
- POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT#24V190000
PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Peterbilt 365, 367, 389, 535, 536, 537, 548, 567, 579, and 2021-2025 Kenworth T180, T280, T380, T480, T680, T880 and W990 trucks. The right-hand gear shifter stalk connectors may have been improperly crimped, resulting in a loss of communication.
Risk: A loss of communication between the gear shifter and the transmission may result in the vehicle becoming disabled after coming to a stop, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the gear shifter assembly as necessary, free of charge. Owner letters were mailed December 15, 2025, then phased after that. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24PBE and 24KWE.
- STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM#24V043000
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 520, 567, and Kenworth T800, T880, W900, and W990 trucks. The bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies.
Risk: An improperly installed wheel end hub assembly can leak oil, causing the axle spindles to loosen or fracture and increasing the risk of a crash.
Remedy: Dealers will inspect and replace the steering knuckle assemblies as necessary, free of charge. Owner letters were mailed February 23, 2024. Owners may contact Peterbilt customer service at 1-940-591-4220 and/or Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 24PBB and 24KWB.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2024 Peterbilt 367 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.