RECALLS — PETERBILT 320
Peterbilt 320 recalls
Peterbilt 320 model years 2010–2023 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
12- Suspension#2022725
375 units affected
Issue: On certain refuse trucks, the tracking rod brackets on the drive axles could break. If this happens, the tracking rod could detach and cause sudden loss of vehicle stability. Safety Risk: A sudden loss of stability could increase the risk of a crash. Corrective Actions: Paccar will notify owners by mail and instruct you to take your truck to a dealership to install reinforcements on the tracking rod brackets.
- Steering#2021006
34 units affected
Issue: On certain trucks equipped with a right-hand stand-up driving position, the steering column may not be properly supported and could come loose from the mounting structure. If this happens, the driver may have difficulty steering the truck. Safety Risk: A loose steering column could cause a loss of control and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your truck to a Peterbilt dealer to inspect, and if necessary, replace the steering column structure. Additional support brackets will also be installed.
- Steering#2017461
281 units affected
On certain vehicles, the castellated nut and cotter pin on the steer axle may not have been tightened to specification. This could cause the tie rod to become loose in the steer axle, which would result in audible noise and/or looseness in steering. If the vehicle were continued to be operated in this condition, the tie rod could disconnect from the knuckle, resulting in a complete loss of control of a vehicle wheel, which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the torque of the castellated nuts on the tie rod, and replace the tie rod stud and knuckle as necessary.
- Engine#2016289
178 units affected
On certain vehicles, the Engine Control Module (ECM) may develop an internal electrical short circuit that could blow a fuse in the ECM's electrical supply circuit. This could cause the engine to stall without warning and prevent the vehicle from being restarted. Engine stalling without warning would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ECM.
- Engine#2015211
169 units affected
On certain vehicles equipped with Cummins Westport ISL-G engines, excessive engine crankcase pressure could cause the vent tube assembly elbow to detach from the breather. This could allow engine oil to come in contact with hot surfaces, increasing the risk of fire resulting in injury and/or damage to property. Correction: Dealers will install clamps at both ends of the elbow of the breather tube assembly and reprogram the Electronic Control Module (ECM) to improve diagnostic capabilities.
- Steering#2015078
574 units affected
On certain vehicles, the tie rod end clamp bolts may not have been tightened to the correct specification. As a result, the tie rod ends could loosen, corrode, and eventually separate from the tie rod, resulting in a loss of steering control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace tie rod assembly where the factory installed assembly has not been replaced.
- Brakes#2015037
11 units affected
On certain vehicles equipped with a Wabco quick release with double check valves, used to control park/spring brake application, the valve may leak internally. This could cause unintended partial or full park/spring brake application, which could affect service brake function and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will affect repairs.
- Fuel System#2014339
199 units affected
On certain vehicles equipped with Cummins ISB and ISL engines, the fuel filter shell and nut plate could separate, causing a fuel leak and also causing the engine to stall. Stalling would result in a loss of motive power, increasing the risk of a crash resulting in injury and/or damage to property. Correction: Dealers will replace the fuel filter.
- Electrical#2014305
224 units affected
On certain trucks equipped with Sure Power power distribution modules, excessive play in electrical connections may result in unexpected loss of exterior lighting, anti-lock braking system and/or windshield wipers, as well as engine shutdown. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Owners will be instructed to install nylon tie wraps to temporarily secure electrical connectors. Once repair parts become available, dealers will install connector securement devices.
- Engine#2014046
82 units affected
On certain vehicles equipped with Cummins ISL G or ISX12 G engines, incorrect engine ECU programming could cause the exhaust system temperature to become elevated during cold weather operation. This could also cause flames to be emitted from the exhaust. As a result, nearby combustible material could be ignited, increasing the risk of a fire, injury and/or damage to property. Correction: Authorized Cummins service facilities will update software programming.
- Seats And Restraints#2014020
1,646 units affected
On certain vehicles, the seat belts may not comply with Canada Motor Vehicle Safety Standard 209 - Seat Belt Assemblies. Due to a defect in manufacturing, the seat belt buckle may not release as required by the standard. This could hinder egress from the vehicle in an emergency, increasing the risk of injury. Correction: Dealers will inspect and, if necessary, replace affected seatbelt buckles.
- Brakes#2012027
1,434 units affected
On certain trucks equipped with Bendix ATR-6 Antilock Traction Relay valves, in extremely cold conditions (at or below -18 degrees Celsius), internal ATR valve leakage can occur. This could cause unintended brake application, which could overheat the affected brakes and cause a fire. Also, in certain low traction conditions, unexpected brake application can cause a loss of vehicle control and a crash. These issues could result in property damage and/or personal injury. Correction: Dealers will update the cover assembly on the ATR valves.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada