RECALLS — MAKE · MODEL · YEAR
2016 Peterbilt 220 recalls
6 safety recall campaigns have been filed for the 2016 Peterbilt 220 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 03
- U.S. recalls
- 03
- Total campaigns
- 06
Transport Canada recalls
03- Steering#2017461
281 units affected
On certain vehicles, the castellated nut and cotter pin on the steer axle may not have been tightened to specification. This could cause the tie rod to become loose in the steer axle, which would result in audible noise and/or looseness in steering. If the vehicle were continued to be operated in this condition, the tie rod could disconnect from the knuckle, resulting in a complete loss of control of a vehicle wheel, which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the torque of the castellated nuts on the tie rod, and replace the tie rod stud and knuckle as necessary.
- Suspension#2017432
1,682 units affected
On certain vehicles, the front axle sway bar link may come loose and detach from the frame rail. If the sway bar link were to detach, it could become lodged between the drag link and the front shock absorber, potentially binding the steering system, which could affect steering control and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the upper sway bar link attachment for the presence of the hardened washer between the bushing and the nut and install the washer if not present.
- Accessories#2015148
169 units affected
On certain vehicles, the cruise control SET decrease speed button (-) on the steering wheel will increase rather than decrease the vehicle’s speed when pressed. A single press of the button will increase the speed by 1.6 km/h, a sustained press of the button will cause the speed to increase until the button is released. Unexpected increase in vehicle speed could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will flash the cab controller with updated software.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
03- STEERING:LINKAGES:TIE ROD ASSEMBLY#17V593000
PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
Risk: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. The recall began on November 13, 2017. Owners may contact Peterbilt customer service at 1-940-591-4000 or Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is P817-C.
- POWER TRAIN:AXLE ASSEMBLY#17V554000
PACCAR Incorporated (PACCAR) is recalling certain 2009-2010 Peterbilt 210 and 220 trucks; 2012-2018 Peterbilt 210 and 220 trucks; and 2010-2018 Kenworth K270 and K370 trucks. These LFNA trucks have a front axle sway bar link that may come loose on the frame rail end and fall into the path of the drag link, possibly binding the steering system.
Risk: If the sway bar link detaches and falls into the drag link, it may impact the ability of the vehicle to steer properly, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will inspect the upper sway bar link attachment for a hardened washer installed between the bushing and the nut, installing a washer if it is missing, free of charge. The recall began on October 2730, 2017. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 817-D and 17KWE.
- VEHICLE SPEED CONTROL:CRUISE CONTROL#15V206000
PACCAR Incorporated (PACCAR) is recalling certain model year 2015-2016 Peterbilt 220 and Kenworth K300 trucks manufactured September 1, 2014, to March 30, 2015. Each time the cruise control speed decrease button is pressed, the vehicle speed will actually increase by one mile per hour.
Risk: If a driver is intending to slow down a vehicle but instead it inadvertently speeds up, there is an increased risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the cab controller software, free of charge. The recall began on June 5, 2015. Owners may contact Peterbilt customer service at 1-940-591-4000, or Kenworth customer service at 1-425-828-5000. PACCAR's numbers for this recall are 415-E and 15KWC.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2016 Peterbilt 220 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.