Skip to content
VINscan

RECALLS — MAKE · MODEL · YEAR

2013 NEW Flyer XD40 recalls

10 safety recall campaigns have been filed for the 2013 NEW Flyer XD40 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls
07
U.S. recalls
03
Total campaigns
10

Transport Canada recalls

07
  • Structure#2016164

    159 units affected

    On certain buses, the software for the Electric Transit Operator (ETO) control module which controls the rear passenger exit door may contain an error. This could result in a higher than required output torque from the ETO control module when the door is in a fully open position, which over time may result in a fracture of the rear door roller plate. If the roller plate fails there is a potential for the rear door to open inadvertently while the bus is in motion, which would increase the risk for injury to vehicle occupants, and/or result in damage to property. Correction: Dealers will reprogram the ETO control module, and replace both rear door roller plates with more robust versions.

  • Seats And Restraints#2016031

    144 units affected

    Certain buses equipped with a Recaro ERGO-M driver seats may be missing welds on the seat structure. As a result, the seatbelt anchorage assembly could separate from the seat structure in the event of a crash, which would increase the risk of injury. Correction: Dealers will inspect for missing welds and if required replace the J-brackets.

  • Structure#2015215

    128 units affected

    On certain buses, the software installed that controls the electronic door controller assemblies may be incorrect. The software programming in the controller may misinterpret door operational status from the vehicle multiplex system. If the driver were to initiate the doors open option as the bus accelerates from a stop, this could allow the passenger doors to reopen. If this were to occur while the vehicle is in motion, an occupant could fall from the vehicle and sustain injuries. Correction: Dealers will update the vehicle software.

  • Brakes#2014371

    274 units affected

    On certain vehicles, insufficient clearance through the brake pedal mounting plate can result in improper alignment between the brake pedal assembly and the brake valve actuator. This misalignment could cause the brake valve actuator to become damaged, causing an increase in resistance when depressing the brake pedal, or brake drag when the pedal is released. This could increase vehicle stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Owners will be sent repair instructions and revised parts.

  • Powertrain#2014358

    39 units affected

    On certain vehicles equipped with Cummins ISB or ISL engines, the fuel filter shell and nut plate could separate, causing a fuel leak and also causing the engine to stall. Stalling would result in a loss of motive power, increasing the risk of a crash resulting in injury and/or damage to property. Correction: Dealers will replace the fuel filter.

  • Brakes#2013339

    17 units affected

    On certain buses, air brake circuits at the treadle valve may have been crossed during assembly. In the event of an air leak in the rear air reservoir, this would result in a loss of both the front and rear service brakes, a reduction of braking performance and increased stopping distances. This could increase the risk of injury and/or damage to property. Correction: Vehicles will be inspected and corrected if necessary.

  • Electrical#2013177

    69 units affected

    On certain buses, the push-button ignition switch could fail to return after being depressed. This would allow the engine to start unexpectedly when the ignition circuit is re-energized, which could injure someone working in the engine compartment. Correction: New Flyer will provide fleet operators with directives to inspect and replace both ignition switches (in the driver’s area, and in the engine compartment).

Canadian data updated August 24, 2026

U.S. NHTSA recalls

03
  • SEATS#16V038000

    New Flyer Industries, Ltd. (New Flyer) is recalling certain model year 2015 New Flyer MD30, 2012 C35LFR, 2010-2011 D35LFR, NABI 35LFW, 2011 D40LFR, 2010-2012 D60LFR and NABI 31LFW, 2010 C40LF, DE35LF, D40LF, DE40LFA, DE60LFA, GE35LFR and GE40LF, 2009 DE60LF and GE40LFR, 2010-2013 C40LFR, DE60LFR, NABI 416 and NABI 60BRT, 2010-2015 XD35, XDE40, NABI 40LFW and 42BRT, 2011-2015 XD40 and XN40, 2013-2015 XD60, XDE60 and XN35, 2010-2014 XDE35, 2013 XE40, 2012-2015 XN60, equipped with certain Recaro Ergo-M Commercial Bus Driver Seats. The affected seats have J-Brackets that may be missing welds which could allow the seat belt anchorage assembly to separate from the J-Bracket.

    Risk: If the seatbelt anchorage assembly separates from the J-Bracket, the bus driver may not be properly restrained in the event of a crash, increasing their risk of injury.

    Remedy: New Flyer will notify owners instructing them to inspect their seats for missing welds. Recaro will supply replacement anchorage brackets and cover the labor to replace them if any welds are missing, free of charge. The recall began on February 4, 2016. Owners may contact New Flyer customer service at 1-204-224-6706, or Recaro customer service at 1-800-873-2276. New Flyer's number for this recall is R16-001.

  • SERVICE BRAKES, AIR#14V532000

    New Flyer Industries Ltd. (New Flyer) is recalling certain model year 2013 XD35, XDE35, XE40, and 2013-2014 XD40, XD60, XDE40, XDE60, XN35, XN40, and XN60 transit buses. During installation, the Brake Pedal Mounting Plate may have been clamped between the Brake Pedal Assembly and the Brake Valve Actuator (BVA) resulting in a misalignment and binding of the internal piston in the BVA.

    Risk: The binding of the piston may result in increased resistance while applying the brakes and the potential for brake drag once the brake pedal is released. These conditions increase the risk of a crash.

    Remedy: New Flyer will notify owners and will replace the brake pedal mounting plate and the Brake Valve Actuator (BVA), free of charge. The recall began on September 15, 2014. Owners may contact New Flyer customer service at 1-204-934-4876. New Flyer's number for this recall is R14-019.

  • SERVICE BRAKES, AIR#13V487000

    New Flyer Industries Ltd. (New Flyer) is recalling certain model year 2013 XD40 buses manufactured May 24, 2013, through September 5, 2013; model year 2013 XN40 buses manufactured April 18, 2013, through September 11, 2013; model year 2013 XD60 buses manufactured May 31, 2013, through September 5, 2013; and model year 2013 XDE40 buses manufactured on May 17, 2013. The color coded air lines to the E-6 brake treadle valve may have been installed incorrectly. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems."

    Risk: In the event of a loss of air supply pressure in the rear air reservoir, there would be a loss of service braking effect on both the front and rear axles, increasing the risk of a crash.

    Remedy: New Flyer has notified owners, and dealers will inspect, and correct the air line routing, as needed, free of charge. Owners may contact New Flyer at 1-204-982-8400. New Flyer's recall number is R13-023.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

Check a 2013 NEW Flyer XD40 VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits