RECALLS — MERCEDES-BENZ GL CLASS
Mercedes-Benz GL Class recalls
Mercedes-Benz GL Class model years 2010–2017 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
11- Brakes#2022237
31,577 units affected
Issue: On certain vehicles, corrosion could cause the brake booster to fail. If this happens, there may be an increase in brake pedal effort and increase the distance needed to stop the vehicle. In rare cases of severe corrosion, the brake booster could separate completely and cause a loss of brakes. Safety Risk: A loss of brakes can increase the risk of a crash. Corrective Actions: Mercedes-Benz advises you to stop driving your vehicle immediately. The company will notify owners by mail and instruct you to contact a local Mercedes-Benz dealership to arrange for towing and an inspection. The dealer will remove the rubber brake booster sleeve and determine whether the vehicle is safe to drive or if it can't be driven and a parts replacement is necessary. Also, depending on the results of the inspection, you may need to return within two years for a re-inspection.
- Engine#2018217
1,627 units affected
On certain vehicles equipped with the Active Curve System (ACS), the oil in the ACS’s reservoir could start foaming under certain dynamic driving situations in combination with an oil level below minimum. The oil foam could leak out of the oil reservoir through the vent holes in the sealing cap and spray onto hot surface components of the exhaust system. This could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will inspect the ACS reservoir for proper oil level and replace the sealing cap with an updated part.
- Airbag#2017145
4 units affected
On certain vehicles, an update provided between de 3rd and 5th of December 2016 to the vehicle control unit may have been incorrectly applied. This could affect the proper function of various safety systems such as airbag deployment sequence, seatbelts recognition status, speed limiter setting and others. These conditions could increase the risk of injury to the occupants in the event of a crash. Correction: Dealers will update the affected control units.
- Steering#2017059
8 units affected
On certain vehicles, the connections between the upper control arms and the axle stubs may not have been tightened properly during assembly. This could affect steering and directional control of the vehicle, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will check the bolt torque connections between the upper control arms and axle stubs and replace the upper control arms if necessary.
- Steering#2016619
6 units affected
On certain vehicles, the axle bolts on the front and/or rear axle may not have been correctly assembled. This could cause the bolts to fracture, which could affect vehicle handling and stability, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the axle bolts.
- Seats And Restraints#2016618
5,346 units affected
On certain vehicles, the calibration of the front passenger seat Occupant Classification System (OCS) may not detect a small statured seat occupant if the occupant is sitting on the edge of the seat and remains stationary for a long period of time. As a result, the passenger frontal airbag may not deploy in a crash, increasing the risk of injury. Correction: Dealers will update the software of the Occupant Classification System.
- Airbag#2016158
73,000 units affected
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag module.
- Lights And Instruments#2014430
828 units affected
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. The daytime running lights can be deactivated by the driver, contrary to the requirements of the standard. This could reduce vehicle conspicuity during daylight hours, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software.
- Seats And Restraints#2013138
30 units affected
On certain vehicles, seatbelt anchors for the second row seats may not have been sufficiently tightened during vehicle assembly. Failure of the seatbelt anchor to restrain the seat occupant during a crash could increase the risk of personal injury. Correction: Dealers will inspect and, if necessary, tighten the second row seatbelt anchor bolts.
- Fuel System#2011359
3,370 units affected
On certain vehicles equipped with a diesel engine, the fuel filter assembly may develop a leak from the fuel heater o-ring seal. Diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. This could ultimately result in a vehicle crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the diesel fuel filter assembly.
- Fuel System#2010375
1,136 units affected
On certain GL350, ML350 and R350 BlueTEC vehicles, the diesel fuel filter may have an O-ring that was not properly lubricated during assembly, which could lead to a diesel fuel leakage. As a result, diesel fuel may be deposited on the road and create a risk a crash. Correction: Dealers will replace the fuel filter.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada