2019 International HX recalls

• Engine#2022518September 15, 2022

  1,171 units affected

  Issue: On certain trucks, the connecting rod bushings could fail due to a manufacturing defect. This could cause an engine failure that can result in a sudden loss of power with an inability to restart. Note: This is an expansion of recall 21505 (Transport Canada Recall 2021-240). Safety Risk: A sudden loss of engine power could increase the risk of a crash. Additionally, a stalled vehicle could also increase the risk of crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealer install a detection system to warn a driver if there is a problem with the connecting rod bushing. The system will cause a red engine warning light to turn on if a problem is detected, before a connecting rod failure happens. Engines found with a suspect connecting rod will be repaired.

• Structure#2020551November 12, 2020

  91 units affected

  Issue: On certain trucks, the welds that attach the trailer hitch may crack due to improper welding. As a result, the hitch could detach from the truck while towing a trailer. Note: This recall only affects certain trucks with trailer hitches installed by Commercial Truck Equipment. Safety Risk: A trailer that detaches from a truck could create a risk of a crash. Corrective Actions: Commercial Truck Equipment will notify owners by mail and instruct you to take your truck to a dealer to inspect the trailer hitch and repair or replace it, as necessary. You should stop using the trailer hitch until the inspection and repair have been completed.

• Brakes#2020108March 19, 2020

  Issue: On certain trucks, the connections inside the brake switch could break. UPDATE – When Navistar notified Transport Canada about this problem, they believed that it may cause the brake lights not to work properly. After further investigation, Navistar has determined that this problem will cause the ABS light to turn on, however the brake lights will continue to function. Accordingly, this safety recall was withdrawn. Safety Risk: This problem does not pose a safety risk. Corrective Actions: This is not a recall. This notice is for information only. If the ABS light on your truck turns on, you should contact a local International truck repair facility to have it repaired.

• Powertrain#2018638November 20, 2018

  2,856 units affected

  On certain vehicles equipped with an electronic clutch actuator (ECA), the clutch may have been manufactured improperly and could fail. If this occurs, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will recalibrate the Transmission Control Module (TCM).

• Brakes#2018484September 10, 2018

  198 units affected

  On certain vehicles, the spring-actuated parking brake may have been improperly assembled. This could result in an internal air leak or a complete separation of the parking brake from the service brake chamber, either of which would cause a loss of braking on the affected wheel assembly. This could cause a sudden, unexpected increase in stopping distance, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace affected brake chamber assemblies.

• Engine#2018475September 5, 2018

  3,970 units affected

  On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling system may cause a fuel line to burst. This could result in a significant fuel leak onto the roadway, which would create a road hazard for other motorists. Additionally, this condition could also cause an engine stall without warning, without the ability to restart the engine. Both of these conditions may increase the risk of a crash causing injury and/or damage to property. Correction: Cummins-authorized dealers will replace the affected nylon line with a steel line.

• Fuel System#2018334June 18, 2018

  2 units affected

  On certain commercial trucks, a fuel line could contact the air compressor discharge line. Heat from the compressor discharge line could damage the fuel line, causing a fuel leak which, in the presence of an ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the straight fitting on the air compressor outlet with a 45 degree fitting and install a redesigned air compressor discharge line.

• Brakes#2018231May 3, 2018

  4 units affected

  On certain trucks equipped with an Antilock Brake System (ABS) and Electronic Stability Protection (ESP), the air supply line to the roll stability valve may been plumbed to the incorrect port. This could cause the parking brakes to be modulated unintentionally during a stability control oversteer event, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will reroute the roll stability valve supply line and connect it to the appropriate port.

Canadian data updated August 24, 2026

• ENGINE#22V691000September 15, 2022

  Navistar, Inc. (Navistar) is recalling certain 2018-2021 International HV, 2018-2020 International HX, 2018-2021 International LT and International RH vehicles. The connecting rod wrist pin may crack, resulting in connecting rod failure.

  Risk: Connecting rod failure can cause an engine shutdown, increasing the risk of a crash.

  Remedy: Dealers will install new knock detection software to warn the driver prior to engine connecting rod failure, and replace connecting rods as necessary, free of charge. Owner notification letters were mailed February 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 22518.

• POWER TRAIN:CLUTCH ASSEMBLY#18V826000November 21, 2018

  Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

  Risk: Unintended vehicle movement can increase the risk of a crash.

  Remedy: Navistar will notify owners, and dealers will recalibrate the Transmission Control Module (TCM), free of charge. The recall began January 18, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18518.

• SERVICE BRAKES, AIR#18V597000September 7, 2018

  Navistar, Inc. (Navistar) is recalling certain 2019 International HX, DuraStar, WorkStar, HV, LoneStar, LT, MV, and RH vehicles, and IC Bus HC, CE, and RE vehicles equipped with long stroke brake chambers and spring actuated parking brakes. The spring actuated parking brake may be improperly crimped to the long stroke service brake chamber, causing a service brake air leak and the possible separation of the spring brake chamber from the service brake section.

  Risk: An air leak or separation of the spring brake chamber can increase the needed stopping distance, increasing the risk of a crash.

  Remedy: Navistar will notify owners, and dealers will replace the brake chamber assemblies from the suspected lot, free of charge. The recall began October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18512.

• ENGINE AND ENGINE COOLING:ENGINE:DIESEL#18V588000September 5, 2018

  Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.

  Risk: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.

  Remedy: Cummins will notify the affected owners and dealers will replace the nylon fuel line with a steel fuel line, free of charge. Navistar issued owners an interim notification on October 11, 2018. The recall began November 21, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.

• FUEL SYSTEM, DIESEL#18V412000June 18, 2018

  Navistar, Inc. (Navistar) is recalling certain 2018-2019 International HX and LT trucks equipped with a Cummins ISX engine and a Wabco 37.4 air compressor. The air compressor discharge line may contact the fuel filter inlet and outlet lines (fuel lines) and the heat generated from the air compressor discharge line may cause heat damage to the fuel lines.

  Risk: Continued heat damage to the fuel lines could cause the fuel lines to rupture, resulting in a fuel leak and increasing the risk of a fire.

  Remedy: Navistar will notify owners, and dealers will replace the straight fitting on the air compressor discharge line and the discharge line with a 45-degree fitting and a redesigned discharge line, free of charge. The recall began on July 20, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18511.

• SERVICE BRAKES, AIR#18V289000May 3, 2018

  Navistar, Inc. (Navistar) is recalling certain 2017-2019 International HX severe service diesel trucks equipped with feature code 04091 (dual air brake system) and 04AZY (Antilock Brake System (ABS) with 6 channel Electronic Stability Protection (ESP)). The air supply line to the SR7 roll stability valve may have been improperly routed to the ATR6 brake control valve steer axle delivery port, when it should be connected to the ATR6 brake control valve control port.

  Risk: During a stability control oversteer event when there are slippery road conditions, the parking brakes may be modulated unintentionally, potentially causing a loss of control and increasing the risk of a crash.

  Remedy: Navistar will notify owners, and dealers will reroute the SR7 roll stability valve supply line to the ATR6 brake control valve control port, free of charge. The recall began on June 12, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18504.