2015 Honda FIT recalls

• Airbag#2015499October 23, 2015

  8,081 units affected

  On certain vehicles, the rear grab rail brackets may not have been manufactured to design specifications. In the event of a collision, they could interfere with side curtain airbag deployment and could result in a rear-seat occupant not receiving the intended protection from the side curtain airbag, increasing the risk of injury. Correction: Dealers will replace the rear grab rail bracket with one that has felt applied to prevent a puncture of the side curtain airbag.

• Powertrain#2015401September 14, 2015

  25,480 units affected

  On certain vehicles equipped with a CVT transmission, the drive pulley shaft could be subjected to high stress during certain operation modes. During the manufacturing of the drive pulley shaft, some parts may have been produced at the lower end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high pressure modes, it could result in the shaft breaking during operation. If the drive pulley shaft were to break, it could result in a loss of propulsion or the front wheels locking up while driving, which would increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will install a CVT software update that contains a stress reduction program.

• Electrical#2015389September 3, 2015

  992 units affected

  On certain vehicles, the plug top ignition coil (PTC) may not provide sufficient protection against electrical noise and wires inside the coil could be damaged as a result. If this occurs, the coil could overheat and melt, potentially causing the check engine light to illuminate, and/or the engine or fuel injection system to malfunction. This could result in an engine stall resulting in loss of motive power which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the plug top ignition coil (PTC) with a new PTC of a different design.

Canadian data updated August 24, 2026

• STRUCTURE#15V697000October 23, 2015

  Honda (American Honda Motor Co.) is recalling certain model year 2015-2016 Fit LX-trim vehicles manufactured April 11, 2014, to July 02, 2015 and not equipped with a sunroof. In the affected vehicles, the rear grab handle brackets were not manufactured properly, and as a result, the brackets may puncture the side curtain air bags upon their deployment. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 214, "Side Impact Protection" and number 226, "Ejection Mitigation".

  Risk: If the side curtain air bags are punctured upon deployment, the outboard seat occupants may be at a higher risk of injury during a crash.

  Remedy: Honda will notify owners, and dealers will replace the rear grab handle bracket, free of charge. The recall began on December 18, 2015. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is JV8.

• POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)#15V574000September 15, 2015

  Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Civic vehicles manufactured January 16, 2014, to November 6, 2014 and 2015 Fit vehicles manufactured March 12, 2014, to May 12, 2015. The software settings that control the transmission operation may result in damage to the transmission drive pulley shaft.

  Risk: If the transmission drive pulley shaft is damaged, it may break, and the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash.

  Remedy: Honda will notify owners, and dealers will update the software for the transmission, free of charge. The recall is expected to begin October 30, 2015. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are JU2 (Civic) and JU3(Fit).

• ELECTRICAL SYSTEM:IGNITION#15V559000September 3, 2015

  Honda (American Honda Motor Co.) is recalling certain model year 2015 Fit vehicles manufactured December 6, 2013, to August 28, 2014. The affected vehicles may experience damage to the wires inside the Plug Top Ignition Coils (PTC) due to improper protection against electrical noise.

  Risk: If the wires become damaged, the coil may overheat and cause the engine to stall, increasing the risk of a crash.

  Remedy: Honda will notify owners, and dealers will replace the Plug Top Ignition Coils with new design, free of charge. The recall began on October 9, 2015. Owners may contact Honda Automobile Customer Service at 1-888-234-2138. Honda's number for this recall is JT9.

• AIR BAGS:SIDE/WINDOW#14V563000July 30, 2014

  American Honda Motor Co. (Honda) is recalling certain model year 2015 Honda Fit vehicles manufactured April 11, 2014, to June 9, 2014. The affected vehicles may have been assembled with an A-pillar interior cover designed for vehicles without side curtain air bags.

  Risk: The affected vehicles are equipped with side curtain air bags and in the event of a crash necessitating deployment of the side curtain air bags, the incorrect A-pillar interior cover may adversely affect the performance of the side curtain air bags increasing the risk of occupant injury.

  Remedy: Honda will notify owners, and dealers will inspect the A-pillar interior cover and install the correct A-pillar cover, as necessary, free of charge. The recall is expected to begin on September 25, 2014. Owners may contact Honda customer service at 1-800-999-1009. Honda's number for this recall is JF9.