RECALLS — HINO 358
Hino 358 recalls
Hino 358 model years 2010–2020 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
07- Structure#2021126
257 units affected
Issue: On certain trucks, the side mirror glass may not be properly attached. This could cause the mirror glass to fall off. Note: This recall replaces Transport Canada recall 2019-375 (Hino recall M0330). Vehicles that were inspected or repaired under that recall also require this second inspection or repair. Safety Risk: A missing mirror will reduce rear visibility and could increase the risk of a crash. If the mirror glass falls from the vehicle, it could strike another vehicle or pedestrian. Corrective Actions: Hino will notify owners by mail and instruct them to take their truck to a dealer to inspect the build date of mirrors. The mirrors will be replaced as necessary.
- Electrical#2020190
1,795 units affected
Issue: On certain vehicles, the cable that connects the negative battery terminal to the frame may be too short and could break. If this happens, it will not be possible to start the engine. Safety Risk: In certain situations, a vehicle that cannot be re-started could create an increased risk of a crash. Corrective Actions: Hino will notify owners by mail and instruct you to take your truck to a dealer to install an extension bracket on the negative battery terminal. Dealers will also inspect the ground cable terminal for damage. If damage is found, the cable will be replaced.
- Structure#2019375
257 units affected
This recall was replaced by Transport Canada Recall No. 2021-126. Issue: On certain trucks, the side mirror glass may not be properly attached. This could cause the mirror glass to fall off. Safety Risk: A missing mirror will reduce rear visibility and could increase the risk of a crash. If the mirror glass falls from the vehicle, it could strike another vehicle or pedestrian. Corrective Actions: Hino will notify owners by mail and instruct them to take their truck to a dealer to inspect the build date of mirrors. The mirrors will be replaced as necessary.
- Electrical#2018093
927 units affected
On certain vehicles, the terminal bolts that secure the main fuse terminals within the fuse block may not have been tightened properly during production. This may result an electrical open circuit, which could cause the terminals to overheat, potentially causing smoke, and increase the risk of a fire. Additionally, an open circuit could also affect operation of the box light, operation of the air suspension dump valve, the ABS warning light illuminating, and a possible engine stall. These conditions could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and ensure the main fuse terminal bolts are tightened to specification.
- Engine#2017473
458 units affected
On certain vehicles, the engines may have produced with improper retention of the connecting rod wrist pin bushing, causing the bushing to move out of position. If the vehicle is operated with this condition, the connecting rod could break resulting in a loss of motive power, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the defective connecting rod wrist pin assemblies.
- Electrical#2012273
9,072 units affected
On certain trucks, the positive battery cable (between the battery and the starter) could chafe against a convoluted tubing which, over time, could cause abrasion damage to the cable insulation, possibly resulting in an electrical short circuit. An electrical short could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the positive battery cable between the battery and the starter.
- Wheels#2011422
23 units affected
On certain trucks, wheel-end retainers may have been incorrectly installed on the front and rear axles during vehicle assembly. This could allow the wheel assembly to separate from the vehicle, which could cause a loss of control and a crash. In addition, the errant wheel assembly could strike a vehicle, a stationary object, or a bystander. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, as necessary, replace the wheel bearings, lock washers, lock rings, and/or hub seals.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada