2016 Freightliner Cascadia recalls

• Lights And Instruments#2020158April 14, 2020

  873 units affected

  Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.

• Steering#2019066February 13, 2019

  1 units affected

  Issue: Brake vibrations may cause a steering tie rod to fail. If the tie rod fails and separates, the connection between the front wheels could be lost, reducing a driver’s ability to steer. Note: This problem only affects one vehicle built with a specific combination of a Hendrickson 5" drop axle, brake linings and stamped brake spiders. Safety Risk: A reduced ability to steer could increase the risk of a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a Daimler Trucks North America authorized service facility to have the brake spiders and tie rod replaced.

• Brakes#2017583November 28, 2017

  41,763 units affected

  On certain vehicles with air brakes, after several hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. If the brake lights do not illuminate, following road users would be unaware of the intent of the driver to slow the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will repair the brake light pressure switch.

• Steering#2017488October 10, 2017

  11 units affected

  On certain vehicles, the castellated nut and cotter pin on the steer axle may not have been tightened to specification. This could cause the tie rod to become loose in the steer axle, which would result in audible noise and/or looseness in steering. If the vehicle were continued to be operated in this condition, the tie rod could disconnect from the knuckle, resulting in a complete loss of control of a vehicle wheel, which would increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will inspect the torque of the castellated nuts on the tie rod, and replace the tie rod stud and knuckle as necessary.

• Wheels#2016419August 30, 2016

  149 units affected

  On certain vehicles, the specified front axle weight limit may be greater than the hub capacity. If the axle load exceeds the maximum weight capacity of the hub, there is an increased risk of hub fatigue, which could cause a complete separation of the wheel(s) and a loss of vehicle control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the incorrectly specified front axle hubs.

• Heater And Defroster#2016113March 8, 2016

  1,282 units affected

  On certain vehicles equipped with Bergstrom Parksmart HVAC units, there maybe be inadequate electrical contact within the connector at the top of the compressor. This could cause an increased resistance in the circuit resulting in localized heating, which would increase the risk of fire causing injury and/or damage to property. Correction: Dealers will remove the open style design connector cap and replace it with an improved closed design cap, and will also inspect the compressor connector terminal for any signs of heat discolouration and replace the harness if discolouration is found.

• Steering#2015485October 16, 2015

  427 units affected

  On certain vehicles built with a front axle built by Detroit Axles, the steering arm bolt may not have been sufficiently tightened at time of assembly. This could allow the bolt to loosen and potentially result in the separation of the steering arm from the steering knuckle, which could result in a loss of steering. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the bolt torque and re-tighten or replace as necessary.

• Engine#2015484October 16, 2015

  15 units affected

  On certain vehicles, the Engine Control Module (ECM) may develop an internal electrical short circuit that could blow a fuse in the ECM's electrical supply circuit. This could cause the engine to stall without warning and prevent the vehicle from being restarted. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ECM.

Canadian data updated August 24, 2026

• EXTERIOR LIGHTING#20V214000April 14, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

  Risk: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

• SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK#19V370000May 14, 2019

  Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

  Risk: An insufficient air reservoir volume may reduce brake effectiveness, increasing the risk of crash.

  Remedy: DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.

• STEERING:LINKAGES:TIE ROD ASSEMBLY#19V093000February 12, 2019

  Daimler Trucks North America LLC (DTNA) is recalling certain 2013-2016 Freightliner Cascadia vehicles equipped with Hendrickson 5" drop axles. In certain front axle, brake lining, and brake spider combinations, braking may cause high vibrations, resulting in early failure of the tie-rod tube.

  Risk: A tie-rod failure would cause a disconnect between the front wheels, resulting in a loss of steering ability, thereby increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will replace the stamped brake spiders and the tie-rod, free of charge. The recall began April 12, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-807.

• EQUIPMENT#17V810000December 15, 2017

  Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

  Risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

  Remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

• EXTERIOR LIGHTING:BRAKE LIGHTS#17V761000November 28, 2017

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.

  Risk: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.

• STEERING:LINKAGES:TIE ROD ASSEMBLY#17V628000October 6, 2017

  Daimler Trucks North America LLC (DTNA) is recalling certain 2016 Western Star 4900 and Freightliner Cascadia vehicles, equipped with certain Spicer D-Series and E-Series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.

  Risk: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. DTNA issued an interim to owners on December 4, 2017. The recall began on March 7, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-751.

• ELECTRICAL SYSTEM#16V656000September 13, 2016

  Daimler Trucks North America, LLC. (DTNA) is recalling certain model year 2013-2017 Freightliner Cascadia vehicles manufactured September 24, 2012, to May 27, 2015 and equipped with compressed natural gas (CNG) engines. The affected vehicles have a Power Distribution Module (PDM) that is mounted near the CNG fuel tank. Due to its location, the PDM may be sprayed with water and contaminants from the road, possibly causing the PDM to short circuit.

  Risk: If the PDM short circuits, there would be an increased risk of a fire, especially if the nearby CNG tank leaks.

  Remedy: DTNA will notify owners, and dealers will relocate the PDM, free of charge. An interim notice was mailed to owners on November 7, 2016. The recall began on March 3, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-721.

• POWER TRAIN:AXLE HUBS#16V634000August 31, 2016

  Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Freightliner M2 Business Class, 108 SD, 114 SD, Cascadia, Coronado, Western Star 4700, 4800, and 5700 XE trucks manufactured March 15, 2013, to July 29, 2016 and equipped with Conmet aluminum non-high capacity hubs. These vehicles specify a front axle weight limit that may be greater than that of the hub capacity. As a result, the hub may fail and the wheel may separate from the axle.

  Risk: If a wheel separates from the axle, there would be an increased risk of a crash.

  Remedy: DTNA will notify owners, and dealers will replace the front axle hubs, free of charge. The recall began during November 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-718.

• EQUIPMENT:APPLIANCE:AIR CONDITIONER#16V143000March 9, 2016

  Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015-2016 Freightliner Cascadia trucks manufactured from March 24, 2014, through November 9, 2015. The affected vehicles are equipped with Bergstrom Parksmart HVAC auxiliary units. On these units, there may be inadequate contact between the electrical connector on the compressor and electrical pins causing a high electrical resistance resulting in excessive heat.

  Risk: The overheated connection can increase the risk of a fire.

  Remedy: DTNA will notify owners, and dealers will replace the connector caps. Additionally, dealers will replace the harnesses if there is evidence of heat discoloration. These repairs will be performed free of charge. The recall began on May 12, 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's recall number for this campaign is FL-703.

• ELECTRICAL SYSTEM:IGNITION:MODULE#15V620000October 2, 2015

  Daimler Trucks North America LLC (DTNA) is recalling certain model year 2016 Freightliner Cascadia, Business Class M2, 108SD, 114SD, and 122SD, Western Star 4700 and 4900, Thomas Built Buses Saf-T-Liner C2, and Freightliner MT55 vehicles manufactured August 7, 2015, to August 26, 2015. The affected vehicles are equipped with certain Cummins ISB6.7, ISL9, ISX12 or ISX15 engines whose engine control module (ECM) may short circuit and blow a fuse resulting in the engine stalling without warning.

  Risk: An engine that stalls without warning increases the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will replace the ECM free of charge. The recall began on October 22, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-690.

• POWER TRAIN:MANUAL TRANSMISSION#15V617000October 1, 2015

  Daimler Trucks North America, LLC (DTNA) is recalling certain model year 2015-2016 Freightliner Cascadia, Business Class M2, 108SD, 114SD, and Western Star 4700 trucks manufactured January 4, 2015, to April 24, 2015, and equipped with Eaton Fuller FR 10-speed manual transmissions. In the affected vehicles, when the transmission shift lever is moved from reverse to neutral, the reverse gear may stay engaged. When the transmission shift lever is moved from reverse to a forward gear position, the transmission may mechanically lock because both the reverse gear and forward gear are simultaneously engaged.

  Risk: Even though the transmission has been shifted out of reverse into neutral, the vehicle may unexpectedly move backwards, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and repair the affected transmissions if necessary, free of charge. The recall began on November 24, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-693.

• STEERING:LINKAGES:ARM:IDLER AND ATTACHMENT#15V613000September 30, 2015

  Daimler Trucks North America LLC (DTNA) is recalling certain model year 2016 Freightliner Cascadia, Business Class M2, 108SD, 114SD, 122SD, Coronado Glider, and Columbia Glider vehicles manufactured June 29, 2015, to September 7, 2015. In the affected vehicles, the steering arm bolts may not be properly tightened.

  Risk: If the steering arm bolts are not properly tightened, the steering arm may separate from the knuckle causing a loss of steering and increasing the risk of a crash.

  Remedy: DTNA will notify owners, and Daimler Trucks North America or Detroit Diesel authorized service facilities will inspect the steering arm bolts, tightening them as necessary, free of charge. The recall began on November 12, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-691.