2019 Freightliner 122SD recalls

• Steering#2023083February 20, 2023

  3,460 units affected

  Issue: On certain trucks, the joint connecting the steering arm to the drag link may not have been properly tightened. As a result, the joint could loosen and separate, causing a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the castle nut on the drag link taper joint. The nut will be checked for the correct torque, and tightened or repaired, as necessary.

• Powertrain#2020488October 16, 2020

  966 units affected

  Issue: On certain trucks equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), a component within the clutch assembly could fail. If this happens, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied. Note: This recall replaces FL-803 (Transport Canada recall 2018-714). Trucks that were repaired under that recall also require this repair. Safety Risk: Sudden and unexpected movement of the vehicle could create a risk of injury or a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the clutch and update the transmission software.

• Lights And Instruments#2020158April 14, 2020

  873 units affected

  Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.

• Lights And Instruments#2019336July 4, 2019

  1,280 units affected

  Issue: On certain trucks equipped with electronic stability control (ESC), the brake lights may turn on when the automatic traction control (ATC) activates. Canadian regulations do not allow brake lights to turn on when the automatic traction control activates. Safety Risk: Brake lights that turn on when a vehicle is not slowing could confuse other drivers. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility. The truck will either be reprogrammed or retrofitted so the brake lights do not turn on when the automatic traction control (ATC) activates.

• Powertrain#2018714December 19, 2018

  1,472 units affected

  This recall was replaced by Transport Canada Recall No. 2020-488. On certain vehicles equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), an internal component within the clutch assembly may have been manufactured improperly and could fail. If this occurs, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Authorized Service Facilities will recalibrate the Transmission Control Module (TCM) and replace components as necessary.

• Fuel System#2018469August 31, 2018

  259 units affected

  On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling system may cause a fuel line to burst. This could result in a significant fuel leak onto the roadway, which would create a road hazard for other motorists. Additionally, this condition could also cause an engine stall without warning, without the ability to restart the engine. Both of these conditions may increase the risk of a crash causing injury and/or damage to property. Correction: Cummins-authorized dealers will replace the affected nylon line with a steel line.

• Brakes#2018418August 9, 2018

  448 units affected

  On certain vehicles equipped with air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary.

Canadian data updated August 24, 2026

• STEERING:LINKAGES:DRAG:LINK:CONNECTION#23V105000February 20, 2023

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2021 Freightliner 108SD, 114SD, 122SD, Columbia, Coronado, Business Class M2, and 2020 Freightliner Cascadia vehicles. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm.

  Risk: Drag link separation can cause a complete loss of steering control, increasing the risk of a crash.

  Remedy: DTNA will inspect the drag link taper joint and repair it, as necessary, free of charge. Owner notification letters were mailed April 21, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL967. This recall expands recall number 21V-689.

• POWER TRAIN:CLUTCH ASSEMBLY#20V642000October 16, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia, Business Class M2, 108SD, 114SD and 122SD and Western Star 4700, 4900 and 5700 vehicles. An internal component within the clutch assembly may fail, which in certain circumstances could allow the vehicle to move unexpectedly.

  Risk: Unintended vehicle movement van increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will update the software and replace the clutches, free of charge. DTNA issued owners an interim notification on December 7, 2020. Owner notification letters were mailed on May 28, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-865.

• EXTERIOR LIGHTING#20V214000April 14, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

  Risk: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

• POWER TRAIN:CLUTCH ASSEMBLY#18V903000December 19, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Business Class M2, Western Star 4700, 4900, and 5700 vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

  Risk: Unintended vehicle movement can increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will update the software, and repair any physical components, free of charge. DTNA issued owners an interim notification on February 16, 2019. The recall began July 31, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-803.

• STEERING#18V913000December 19, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

  Risk: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

  Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

• TIRES:SIDEWALL#18V641000September 19, 2018

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner 108SD, 114SD, 122SD and Business Class M2 trucks and Western Star 4700 and 4900 trucks, equipped with certain Bridgestone M854 tires with date codes 2418-2518, Bridgestone M860A tires with date code 2518, and Bridgestone M864 tires with date codes 2318-2418, all of size 425/65R22.5. The sidewall steel body cords may be exposed, which can cause unexpected, rapid air loss during use.

  Risk: Rapid air loss can increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and replace the affected tires, as necessary, free of charge. The recall began October 8, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL790.

• ENGINE AND ENGINE COOLING:ENGINE:DIESEL#18V581000August 30, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia, Coronado and 122SD, and Western Star 4900 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.

  Risk: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.

  Remedy: Dealers will replace the affected nylon fuel line with a steel fuel line, free of charge. The recall began November 21, 2018. Owners may contact DTNA customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. DTNA's number for this recall is FL789.

• SERVICE BRAKES, AIR:DISC:CALIPER#18V525000August 9, 2018

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Coronado, and Business Class M2 vehicles. During manufacturing, the brake caliper mounting bolts may have been insufficiently tightened.

  Risk: Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began October 5, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-783.