Freightliner 108SD recalls

• Suspension#2025610November 4, 2025

  2,464 units affected

  Issue: On certain trucks, the fasteners for the axle clamp(s) may not have been tightened properly. As a result, the clamps could loosen. If this happens, the axle could move and cause a loss of steering control. Note: This recall only affects certain trucks equipped with a TufTrac Gen 2 suspension. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify the owners by mail and advise you to take your truck to a DTNA authorized service facility to inspect and tighten the axle clamp fasteners. The axle clamp castings will be replaced, as necessary.

• Lights And Instruments#2024510September 10, 2024

  451 units affected

  Issue: On certain trucks, a software problem could cause the brake lights not to work when the brakes are automatically applied during emergency braking. Safety Risk: Brake lights that don't work could cause others not to recognize when a vehicle is braking. This could increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and advise you to take your truck to a DTNA authorized service facility to update the active brake assist (ABA) software.

• Steering#2024315June 4, 2024

  33 units affected

  Issue: On certain trucks, the ball stud on the tie rod(s) may not have been manufactured properly. As a result, the stud could fail and cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify the owners by mail and advise you to take your truck to a DTNA authorized service facility to replace the tie rod assembly.

• Visual System#2023202April 4, 2023

  4,784 units affected

  Issue: On certain trucks, the spline teeth in the windshield wiper arm(s) could wear and break. If this happens, the windshield wipers may not work properly. Note: This is an expansion of recall FL-926 (Transport Canada Recall 2022-172). Safety Risk: Windshield wipers that don't work could affect a driver's visibility and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify the owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the windshield wiper arm(s).

• Steering#2023083February 20, 2023

  3,460 units affected

  Issue: On certain trucks, the joint connecting the steering arm to the drag link may not have been properly tightened. As a result, the joint could loosen and separate, causing a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the castle nut on the drag link taper joint. The nut will be checked for the correct torque, and tightened or repaired, as necessary.

• Tires#2022715December 12, 2022

  16 units affected

  Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the affected tires.

• Steering#2022546September 28, 2022

  77 units affected

  Issue: On certain trucks, the tie rod end clamps could crack and loosen. If this happens, the threads on the tie rod end could become damaged and the tie rod end could separate. This could cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace both tie rod end clamps.

• Engine#2022413July 29, 2022

  99 units affected

  Issue: On certain trucks, a problem in the engine control module (ECM) could cause a short circuit. If this happens, the engine could stall and you may not be able to restart it. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to replace the engine control module.

• Steering#2022288June 3, 2022

  425 units affected

  Issue: On certain trucks, a bolt for the upper joint on the steering shaft may not have been installed correctly. As a result, the joint could disconnect and cause a loss of steering. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the upper joint on the steering shaft, and if necessary, re-install the pinch bolt.

• Tires#2021706November 17, 2021

  948 units affected

  Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail. The corrective actions for this recall are under development. You will be instructed to bring your truck to a DTNA authorized service facility when a repair is available.

• Fuel System#2021271May 7, 2021

  731 units affected

  Issue: On certain vehicles, the fuel rail assembly could develop a leak. Note: This recall only affects vehicles equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your vehicle to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.

• Steering#2021219April 12, 2021

  658 units affected

  Issue: On certain trucks, the tie rod arm and steering arm bolts may be defective and could break. If this happens, there could be a loss of steering control. Note: This recall only affects trucks built with a Detroit front axle. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the tie rod arm bolts and the steering arm bolts.

• Powertrain#2020488October 16, 2020

  966 units affected

  Issue: On certain trucks equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), a component within the clutch assembly could fail. If this happens, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied. Note: This recall replaces FL-803 (Transport Canada recall 2018-714). Trucks that were repaired under that recall also require this repair. Safety Risk: Sudden and unexpected movement of the vehicle could create a risk of injury or a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the clutch and update the transmission software.

• Engine#2020408September 1, 2020

  979 units affected

  Issue: On certain trucks, the engine wire harness could be damaged by contact with various locations around the air compressor and the frame rail. If this happens, the engine could stall and you may not be able to restart it. Note: This recall only affects trucks built with a Detroit DD8 engine. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the clearance between the wire harness and engine, and to check for any damage to the wiring. If the wire harness is damaged, it will be replaced with a new harness that has a severe duty wrap and additional hardware for routing.

• Lights And Instruments#2019336July 4, 2019

  1,280 units affected

  Issue: On certain trucks equipped with electronic stability control (ESC), the brake lights may turn on when the automatic traction control (ATC) activates. Canadian regulations do not allow brake lights to turn on when the automatic traction control activates. Safety Risk: Brake lights that turn on when a vehicle is not slowing could confuse other drivers. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility. The truck will either be reprogrammed or retrofitted so the brake lights do not turn on when the automatic traction control (ATC) activates.

• Brakes#2019237May 17, 2019

  110 units affected

  Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.

• Steering#2018719December 20, 2018

  31 units affected

  On certain vehicles, the bolts that join the steering and tie rod arm to the steering knuckle may not have been properly tightened. This could lead to a separation of the tie rod arm and cause a loss of steering control. This could create a risk of a crash causing injury and/or property damage. Correction: Daimler Trucks North America Authorized Service Facilities will inspect the steering and tie rod arm bolts to ensure they are torqued correctly and install new fasteners as necessary.

• Powertrain#2018714December 19, 2018

  1,472 units affected

  This recall was replaced by Transport Canada Recall No. 2020-488. On certain vehicles equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), an internal component within the clutch assembly may have been manufactured improperly and could fail. If this occurs, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Authorized Service Facilities will recalibrate the Transmission Control Module (TCM) and replace components as necessary.

• Brakes#2018550October 9, 2018

  482 units affected

  On certain vehicles equipped with air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary.

• Steering#2018518September 19, 2018

  2,232 units affected

  On certain trucks, the steering shaft assembly may not have been installed correctly. This could cause a loss of connection between the steering wheel and the front wheels, resulting in a loss of steering control and creating the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America Authorized Service Facilities will inspect the steering shaft assembly and repair as necessary. Note: This is an expansion of recall 2018-386.

• Brakes#2017319June 27, 2017

  134 units affected

  On certain vehicles, the required check valve may not have been installed in one of the ports of the spring brake modulation valve. In the event of a rapid loss of air pressure in the secondary system, the missing check valve could cause a similar rapid loss of pressure in the primary system, which may lead to a sudden application of the parking brakes. This could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will inspect and the check valve will be installed if needed.

• Wheels#2016419August 30, 2016

  149 units affected

  On certain vehicles, the specified front axle weight limit may be greater than the hub capacity. If the axle load exceeds the maximum weight capacity of the hub, there is an increased risk of hub fatigue, which could cause a complete separation of the wheel(s) and a loss of vehicle control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the incorrectly specified front axle hubs.

• Brakes#2016176April 22, 2016

  22 units affected

  On certain vehicles, the rear disk brake calipers may contact the spring suspension due to incorrect caliper orientation. This could reduce rear brake effectiveness which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will correct the orientation of the rear calipers.

• Steering#2015485October 16, 2015

  427 units affected

  On certain vehicles built with a front axle built by Detroit Axles, the steering arm bolt may not have been sufficiently tightened at time of assembly. This could allow the bolt to loosen and potentially result in the separation of the steering arm from the steering knuckle, which could result in a loss of steering. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the bolt torque and re-tighten or replace as necessary.

• Fuel System#2015483October 16, 2015

  575 units affected

  On certain vehicles equipped with Cummins ISB or ISL engines, the fuel filter shell and nut plate could separate, causing a fuel leak and also causing the engine to stall. Stalling would result in a loss of motive power, increasing the risk of a crash resulting in injury and/or damage to property. Correction: Cummins-authorized dealers will replace the fuel filter.

• Seats And Restraints#2013427November 27, 2013

  2,888 units affected

  On certain trucks, the seat belts may not comply with Canada Motor Vehicle Safety Standard 209 - Seat Belt Assemblies. Due to a defect in manufacturing, the seat belt buckle may not release as required by the standard. This could hinder egress from the vehicle in an emergency, increasing the risk of injury. Correction: Dealers will inspect and, if necessary, replace affected seatbelt buckles.

• Electrical#2013088March 20, 2013

  56 units affected

  On certain trucks, the customizable SmartPlex switch hub module may experience intermittent electrical shorts. As a range of equipment may have been connected to the switch hub module by final stage vehicle manufacturers; depending on vehicle configuration and intended use, these electrical shorts could have varied consequences. These may include the erratic operation of emergency, warning and/or work lights, the unexpected activation of a remote engine starter or the intermittent and/or uncontrolled operation of other body equipment. These or other malfunctions may result in an increased risk to road users, operators or bystanders. Correction: Dealers will inspect and, if necessary, replace the switch hub module.

• Wheels#2012357October 19, 2012

  On certain vehicles, the wheel rims may have been manufactured incorrectly and could fail. A wheel separating from the vehicle could cause a loss of control and a crash. In addition, the errant wheel assembly could strike a vehicle, stationary object, or a bystander. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the wheel rims. Note: Further evaluation revealed that no Canadian vehicles are involved.

• Brakes#2012139April 23, 2012

  179 units affected

  On certain trucks, the quick release valve (QRV) cover may not have been welded correctly during manufacturing process and may become loose or separate from the valve body. If this occurs, air pressure may not be supplied to the front brakes during brake application. The rear brakes will continue to function. Reduction in braking efficiency could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Daimler authorized repair facilities will inspect and if necessary replace the quick release valve.

• Steering#2012119March 30, 2012

  256 units affected

  On certain vehicles, an incorrect steering wheel fastener may have been installed during vehicle assembly. The incorrect nut may not provide the clamp load required to fully seat the steering wheel onto the steering shaft. This could allow the steering wheel to wobble, which could hamper vehicle operation. If the problem is ignored, the nut could loosen completely, which could allow the steering wheel to detach from the steering shaft. These issues could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the steering wheel nut.

Canadian data updated August 24, 2026