RECALLS — MAKE · MODEL · YEAR
2022 Ford Edge recalls
9 safety recall campaigns have been filed for the 2022 Ford Edge with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 04
- U.S. recalls
- 05
- Total campaigns
- 09
Transport Canada recalls
04- Visual System#2026093
81,850 units affected
Issue: Under certain conditions, the infotainment system could overheat. As a result, the rearview camera image may not display when the transmission is shifted into reverse. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the APIM software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
- Visual System#2025260
159,135 units affected
Issue: On certain vehicles, a software problem could cause the rearview camera image not to display or to freeze when the transmission is shifted into reverse. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the SYNC software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
- Visual System#2025141
365 units affected
Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 22S14 (Transport Canada recall no. 2022-117) may not have been done correctly. As a result, a second repair is required. On certain vehicles, a software problem could cause the rearview camera to display a blank or distorted image. Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC 4 module software.
- Visual System#2022117
11,152 units affected
Issue: On certain vehicles, a software problem could cause the rearview camera to display a blank or distorted image. Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and send a wireless over-the-air software update to each vehicle. Alternatively, you may schedule an appointment to have the update performed at a Ford dealer.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
05- BACK OVER PREVENTION:SOFTWARE#26V124000
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Risk: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
- BACK OVER PREVENTION:SOFTWARE#25V315000
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Risk: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
- BACK OVER PREVENTION:SOFTWARE#25V160000
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Risk: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.
- ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL#24V635000
Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.
Risk: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.
- BACK OVER PREVENTION:DISPLAY FUNCTION#22V151000
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Risk: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2022 Ford Edge VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.