RECALLS — ENTEGRA COACH VISION
Entegra Coach Vision recalls
Entegra Coach Vision model years 2019–2024 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
08- Lights And Instruments#2023615
18 units affected
Issue: On certain motorhomes, the Smart Data Link Connector (SDLC) module may have been damaged by moisture during vehicle assembly. As a result, the module, connector and wiring harness could corrode and cause the instrument cluster not to work. If this happens, warnings, tell-tales and gauges may not display properly. Safety Risk: Warnings, tell-tales and gauges that don't display could increase the risk of a crash. Corrective Actions: Jayco will notify owners by mail and advise you to take your motorhome to a Ford dealership to replace the Smart Data Link Connector (SDLC) module and wiring harness, as necessary.
- Suspension#2023186
102 units affected
Issue: On certain motorhomes, the nuts that attach the rear stabilizer bar bracket(s) could loosen and the attachment bolts and bracket could break. If this happens, the bolts and bracket could detach and separate from the vehicle. Safety Risk: Parts that detach from the motorhome could create a hazard for other road users and increase the risk of a crash. Corrective Actions: Jayco will notify owners by mail and instruct you to take your motorhome to a Ford dealership to inspect and replace or repair the rear stabilizer attachment bolts and brackets as necessary.
- Electrical#2021781
6 units affected
Issue: On certain motorhomes, the main chassis wiring harness may be located too close to the exhaust manifold. As a result, the harness could melt. If this happens, the engine could stall while driving. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Jayco will notify owners by mail and instruct you to bring your motorhome to a dealer to inspect the main chassis wiring harness and secure it away from the exhaust manifold. The dealer will replace the wiring harness if it is damaged.
- Accessories#2020548
5 units affected
Issue: On certain motorhomes, the motor that controls the power bed lift system could fail. If this happens, the bed could fall suddenly. Safety Risk: A bed that falls suddenly could injure a person that is standing nearby. Corrective Actions: The company will notify owners by mail and instruct you to take your motorhome to a dealer to replace the motor for the power bed lift system.
- Engine#2020531
31 units affected
Issue: On certain motorhomes built on a Ford chassis, the insulation for the engine cover may be missing. As a result, some surfaces inside the motorhome could get hot while the engine is running. Safety Risk: If a person touches a hot surface, there could be a risk of a burn injury. Corrective Actions: Jayco will notify owners by mail and instruct you to take your motorhome to a dealer to add insulation to the engine cover. The dealer will also add a foam seal on the outer edge of the cover.
- Electrical#2019166
31 units affected
Issue: On certain motorhomes, the dash blower motor does not have proper fuse protection. As a result, an electrical overload or short circuit could cause the wiring to overheat. Safety Risk: Wiring that overheats could create a risk of a fire. Corrective Actions: The company will notify owners by mail and instruct you to take your motorhome to a dealer to install a fuse for the dash blower. A 25 ampere fuse will be installed in position 23 in the power distribution box. Dealers will also install a label in the fuse box noting "Fuse Position 23 Max. 25 A".
- Visual System#2018362
6 units affected
Certain motorhomes may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 104 – Windshield Wiping and Washing System. When travelling at higher speeds, with the wiper speed setting set to high, the wiper arms could lift away from the windshield and not be able to clean the windshield. This would reduce the driver’s visibility under certain conditions, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the original wiper arms with ones of a new design that will correctly contact and clean the windshield.
- Visual System#2018241
7 units affected
Certain motorhomes may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 104 - Windshield Wiping and Washing System. The wiper system could fail as it does not stall or disengage during a heavy snow or ice scenario, contrary to the requirements of the standard. This could reduce the driver's visibility under certain conditions, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper module with a new relay pack.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada