RECALLS — ALTEC D SERIES
Altec D Series recalls
Altec D Series model years 2010–2023 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
08- Electrical#2023424
19 units affected
Issue: On certain aerial devices and digger derricks, the inverter module may not have proper circuit protection for the AC output. As a result, the wiring could overheat and melt. Safety Risk: Wiring that doesn't have proper circuit protection could create a fire risk. Corrective Actions: Altec Industries will notify owners by mail and advise you to contact Altec Service to install a 20 A circuit breaker for the inverter AC output. Altec advises not to use the inverter AC output until the recall repairs are completed.
- Electrical#2023357
80 units affected
Issue: On certain vehicles, water could leak into the strobe light assembly. If this happens, the strobe light could short circuit. Safety Risk: A short circuit can create the risk of a fire. Corrective Actions: Altec Industries will notify owners by mail and provide you with instructions for how to inspect the strobe light assembly, and replace it if necessary.
- Electrical#2022272
8 units affected
Issue: On a small number of digger derricks, during a stability test, the connectors to a relay may have been reattached incorrectly. As a result, the hydraulic overload protection system may not work properly. If this happens, the unit could be overloaded. Safety Risk: An overloaded digger derrick could create a risk of injury. Corrective Actions: Altec Industries will notify owners by mail and provide you with instructions for how to inspect, and if necessary, properly reattach the relay connectors.
- Other#2022223
12 units affected
Issue: Accessories using chassis air supply could be missing pressure protection valves. This could cause a loss of air pressure to the service brakes through the accessory air system. Note: This is an expansion of Altec recall CSN 724 (Transport Canada Recall No. 2019-348). Safety Risk: A loss of pressure to the service brakes could increase the risk of injury. Corrective Actions: Altec Industries will notify owners by mail and instruct them to inspect their unit for proper pressure protection installations. If the unit fails the inspection, owners are to install the missing pressure protection valves.
- Other#2021656
8 units affected
Issue: On a small number of digger derricks, the gearbox assembly could be defective. As a result, the gearbox brake may not hold the boom in position. If this happens, the boom could rotate freely. Safety Risk: A boom that moves on its own could create a risk of injury. Corrective Actions: Altec Industries will notify owners by mail and provide you with instructions to inspect and replace the gearbox assembly. If the gearbox assembly needs to be replaced, Altec will supply a replacement part or set up a service appointment with an Altec Service Center or Mobile Service Technician.
- Structure#2021022
59 units affected
Issue: On certain aerial devices and digger derricks, a snap ring in the hydraulic check valve assembly could fail. If this happens, the snap ring can get stuck in the hydraulic system. This could result in continued (uncontrolled) movement of the boom. Note: This recall only involves units equipped with a DC pump. Safety Risk: A boom that drifts or continues to move on its own could create a risk of injury to the operator and nearby people. Corrective Actions: Altec Industries will notify owners by mail and provide you with instructions for how to inspect the check valve assembly. If the check valve assembly needs to be replaced, Altec will supply a replacement part or set up a service appointment with an Altec Service Center or Mobile Service Technician.
- Label#2019284
56 units affected
Issue: The slope indicator placard on certain digger derricks may have incorrect information. This could make a user think that it is not necessary to level the unit while working on a slope. A unit that is not properly levelled could be unstable. Safety Risk: An unstable derrick unit could create a risk of injury. Corrective Actions: The company will notify owners by mail and instruct them to remove the incorrect slope indicator placard.
- Other#2015112
82 units affected
On certain aerial devices and digger derricks, the upstream 30A breaker to the trailer relay module may react too slowly to prevent the module from overheating, which could cause a short circuit increasing the risk of fire, which could result in injury and/or damage to property. Correction: Altec will instruct owners to replace 30A breaker with a 20A breaker.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada