Aller au contenu
VINscan

RAPPELS — MARQUE · MODÈLE · ANNÉE

Rappels 2013 International Durastar

20 campagnes de rappel de sécurité ont été déposées pour le 2013 International Durastar auprès de Transports Canada et de la NHTSA américaine. Voici ce que disent les deux agences.

Rappels canadiens
08
Rappels américains
12
Total des campagnes
20

Rappels de Transports Canada

08
  • Moteur#2015546

    1 466 unités visées

    Sur certains véhicules munis d'un moteur Navistar, le capteur d'emplacement de la pédale d'accélération pourrait sortir de sa fixation si le conducteur appuie sur la pédale avec une force excessive. Si la stator du capteur se déplace, cela pourrait modifier la sortie du signal du capteur et dérégler le moteur en position ralenti accéléré. Si le conducteur d'un véhicule doté d'une transmission automatique venait à appuyer sur l'embrayage, le régime du moteur pourrait augmenter au régime régulé maximal ce qui rendrait difficile la sélection d'un rapport pendant l'embrayage. Ainsi, si un véhicule chargé descendait une longue pente, l'incapacité de rétrograder pourrait nuire au maintien de la vitesse du véhicule ou à la réduction de la vitesse avec les freins de service. Cela pourrait augmenter les risques de collision et causer des blessures et/ou des dommages au biens. Correction : Les concessionnaires doivent étalonner de nouveau le module de commande électronique (ECM) du moteur afin d'éviter que celui-ci adopte le régime accéléré.

  • Circuit électrique#2015270

    1 453 unités visées

    Sur certains véhicules, le câble d'alimentation du chauffe-moteur pourrait avoir été mal acheminé. Cela pourrait faire en sorte que le câble entre en contact avec un bord métallique acéré sur la cabine, ce qui causerait un court-circuit et, par conséquent, augmenterait les risques de déclenchement d'un feu pouvant entraîner des blessures ou des dommages matériels (ou les deux). Correction : Les concessionnaires devront fixer en place le câble d'alimentation du chauffe-moteur et laisser un jeu par rapport à la cabine.

  • Circuit électrique#2015171

    8 552 unités visées

    Sur certains véhicules, un démarrage-secours à l'aide de deux batteries (24 V) ou une coupure de l'alimentation électrique pourrait causer une surtension du module de puissance linéaire (LPM), qui sert à contrôler la vitesse du moteur de soufflante de chauffage/climatisation. Si cela se produit, cette surtension pourrait provoquer une surchauffe du module de puissance linéaire, ce qui produirait de la fumée et augmenterait les risques de déclenchement d'un feu pouvant entraîner des blessures ou des dommages matériels (ou les deux). Correction : Les concessionnaires devront remplacer le module de puissance linéaire par un modèle amélioré.

  • Moteur#2014047

    47 unités visées

    Certains véhicules destinés à devenir des véhicules d'urgence et munis de moteurs diesel Maxxforce 7 V8 pourraient avoir été mal configurés. Les logiciels conçus pour protéger le moteur pourraient ne pas avoir été désactivés de manière permanente au moment de la fabrication et pourraient être réactivés par inadvertance lors d'entretien ou de réparations. Dans certaines conditions, un déclassement et/ou un arrêt involontaire de la puissance du moteur pourrait nuire aux interventions en cas d’urgence et mettre le public en danger. Correction : Les concessionnaires devront mettre à jour le logiciel du moteur afin de déactiver les protocoles d’interruption du moteur.

  • Structure#2013122

    3 991 unités visées

    Sur certains camions, le pare-soleil (un pare-soleil extérieur sur le pare-brise avant) pourrait ne pas avoir été correctement fixé au toit de l'habitacle au cours du processus de la chaîne de montage du véhicule. Un pare-soleil qui se séparerait du véhicule pourrait percuter un autre véhicule, un objet stationnaire ou une personne se trouvant à proximité, endommager des biens matériels ou blesser quelqu'un. Correction : Les concessionnaires devront inspecter le pare-soleil et, le cas échéant, le fixer à nouveau.

  • Circuit électrique#2013010

    545 unités visées

    Sur certains véhicules, le fil électrique du régulateur de pression d'injection (RPI) peut se briser à cause des dommages dus aux vibrations à la connexion sertie/du fil. Cela pourrait causer une panne de moteur inattendue et sans avertissement. La perte de propulsion du véhicule, en conjonction avec la densité de la circulation, l'état de la route et les réactions du conducteur, pourrait augmenter les risques d'un accident endommageant des biens matériels ou blessant quelqu'un. Correction : Les concessionnaires devront installer une nouvelle connexion RPI remodelée.

  • Freins#2012311

    18 unités visées

    Sur certains véhicules, les récepteurs de freinage pourraient avoir été mal fabriqués et permettre à de l'air de s'y infiltrer. En conséquence, les freins de stationnement pourraient ne pas se desserrer complètement, ce qui produirait un freinage résiduel qui pourrait causer un incendie d'extrémité de roue. En cas de perte d'air rapide, les freins s'enclencheraient subitement, ce qui causerait leur blocage immédiat. Si cela se produisait pendant que le véhicule roule, un accident pourrait survenir. Cela pourrait aussi endommager des biens matériels ou blesser quelqu'un. Correction : Les concessionnaires devront remplacer les récepteurs de freinage.

  • Freins#2012053

    1 741 unités visées

    Sur certains véhicules munis de soupapes de relais antiblocage Bendix ATR-6, lorsqu'il fait très froid (température égale ou inférieure à -18 °C), une fuite interne au niveau des soupapes ATR pourrait se produire. Cela pourrait faire en sorte que les freins se serrent subitement, ce qui pourrait faire surchauffer les freins visés et causer un incendie. De plus, dans certains conditions de faible adhérence, un serrage inattendu des freins pourrait causer une perte de contrôle du véhicule et un accident. Ces problèmes pourraient endommager des biens matériels ou blesser quelqu'un. Correction : Les concessionnaires devront mettre à jour le couvercle sur les soupapes ATR.

Données canadiennes mises à jour : 24 août 2026

Rappels de la NHTSA (É.-U.)

12
  • EQUIPMENT#17V792000en anglais seulement

    Navistar, Inc. (Navistar) is recalling certain 2000-2001 International 4700, 2000-2002 4900, 2001-2003 8100 (TranStar) and 9100I, 2002-2003, 2005, 2007-2009, 2012-2014 and 2016-2018 DuraStar, 2012 and 2014-2017 ProStar, 2014-2015 TerraStar, and 2018 LT trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

    Risque: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

    Correctif: Navistar will notify owners, instructing them to notify Kidde for a replacement fire extinguisher, free of charge. The recall is expected to begin February 9, 2018. Owners may contact Navistar customer service at 1-331-332-1590, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.

  • VEHICLE SPEED CONTROL:ACCELERATOR PEDAL#15V776000en anglais seulement

    Navistar, Inc. is recalling certain model year 2013-2014 International ProStar and DuraStar trucks manufactured April 26, 2012, to April 4, 2013, WorkStar trucks manufactured April 27, 2012, to March 29, 2013, LoneStar trucks manufactured May 21, 2012, to April 2, 2013, and TranStar trucks manufactured April 30, 2012, to March 25, 2013. In the affected vehicles, the accelerator pedal position sensor can move and result in a high engine idle.

    Risque: A high engine idle may make downshifting the transmission difficult and the engine brake may be disabled. These factors may hinder slowing down the truck when descending a long grade, thereby increasing the risk of a crash.

    Correctif: Navistar will notify owners, and dealers will recalibrate the electronic control module (ECM) to allow it to recognize that the pedal is at the idle position, free of charge. The recall began on January 19, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15517.

  • ELECTRICAL SYSTEM:WIRING#15V394000en anglais seulement

    Navistar, Inc. (Navistar) is recalling certain model year 2010-2014 International Durastar trucks manufactured May 13, 2009, to June 24, 2013, 2011-2012 International Workstar trucks manufactured November 30, 2010, to September 26, 2011, and 2010-2014 IC Bus HC transit buses manufactured November 19, 2009, to April 24, 2013. The affected vehicles may have an improperly routed engine grid heater power feed cable which can result in the cable contacting the metal edge on the cab.

    Risque: If the cable contacts the metal edge of the cab, it may cause an electrical short, increasing the risk of a fire.

    Correctif: Navistar will notify owners, and dealers will secure the power feed cable so that it cannot contact the cab, free of charge. The recall began on August 3, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15514.

  • VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:FAN/MOTOR#15V241000en anglais seulement

    Navistar, Inc. (Navistar) is recalling certain model year 2011-2015 International DuraStar, ProStar, TranStar and WorkStar, 2012-2015 International TerraStar, 2013-2015 International LoneStar and IC Bus HC, and 2014-2015 IC Bus AC vehicles. A vehicle double battery jump start or electrical load dump event could result in an overvoltage condition of a component within the HVAC system linear power module (LPM) which is used to control the blower speed. The overvoltage condition could result in the overheating and failure of the LPM.

    Risque: If the LPM overheats and fails, there is an increased risk of a fire.

    Correctif: Navistar will notify owners, and dealers will replace the LPM with an upgraded one, free of charge. An interim letter was mailed to owners on June 18, 2015. A second notification will mailed when parts become available. The recall began on August 6, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15509.

  • SERVICE BRAKES, AIR:DISC:CALIPER#14V201000en anglais seulement

    Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International DuraStar vehicles manufactured November 2012 through December 2013, International WorkStar vehicles manufactured December 2012 through January 2014, and 2014-2015 International TranStar and International ProStar vehicles manufactured January 2013 through February 2014. The affected vehicles are built with air disc brake feature codes 04WEY, 04WEZ, or 04WZK. These vehicles may have an incorrect number of bolts mounting the brake caliper to the caliper mounting plate and some of the bolts may be improperly torqued.

    Risque: If the air disk brake caliper has loose or missing bolts, the air disk brake caliper may come loose from the mounting plate causing the vehicle to pull left or right while braking and lengthening the distance needed to stop, increasing the risk of a crash.

    Correctif: Navistar will notify owners, and dealers will replace any missing bolts and check the torque of all of the air disk brake caliper bolts, free of charge. The recall began on May 7, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14508.

  • ELECTRICAL SYSTEM:SOFTWARE#14V063000en anglais seulement

    Navistar, Inc. (Navistar) is recalling certain model year 2011-2014 International DuraStar Trucks and 2012-2014 International TerraStar trucks intended for emergency vehicle operations manufactured from February 25, 2010, through February 18, 2013, and equipped with 2010 MaxxForce 7 V8 diesel engines. In the affected vehicles, the Engine Warning Protection Shutdown (EWPS) was inadvertently re-enabled when the Engine Control Module (ECM) was recalibrated.

    Risque: If the Engine Warning Protection System is enabled and certain engine faults occur, the emergency vehicle may shutdown (EWPS) hampering rescue operations and increasing the risk of injury.

    Correctif: Navistar will notify owners, and dealers will recalibrate the ECM software to ensure that the EWPS is disabled, free of charge. The recall began on March 12, 2014. Owners may contact Navistar at 1-331-332-5000. Navistar's recall number for this campaign is 14505.

  • VISIBILITY#13V146000en anglais seulement

    Navistar is recalling certain model year 2011-2012 International Lonestar, model year 2012-2013 International Terrastar and model year 2011-2013 International DuraStar, ProStar, TranStar, and WorkStar commercial trucks manufactured from June 1, 2010, through March 7, 2012 and equipped with day cab codes 16CAB, 16030, or 16196 and feature codes 16WCE, 16WCR, 16XWD, 16XWE, 16XWV, 16XXB, 16XXD, 16XXE, 16XXG, or 16XYN sun shades. The sun shade may not be properly secured to the cab roof panel which may result in partial or full separation of the sun shade from the roof panel.

    Risque: If the sun shade separates from the cab roof during vehicle operation, the sudden release of the sun shade could distract the driver increasing the risk of a crash.

    Correctif: Navistar will notify owners, and dealers will inspect and strengthen the sun shade mounting, free of charge. The safety recall began on September 10, 2013. Owners may contact Navistar at 1-800-448-7825. Navistar's campaign number is 13505.

  • ENGINE AND ENGINE COOLING#13V020000en anglais seulement

    Navistar is recalling certain model year 2012-2013 IC Bus brand model 1300FBC, CE, HC, and RE buses; model year 2011-2013 International brand model Durastar, model year 2013 International brand Workstar trucks; model year 2013 Holiday Rambler brand model Ambassador and Endeavor vehicles; and model year 2013 Monaco brand model Diplomat and Knight vehicles. These vehicles were manufactured August 5, 2010 through September 6, 2012 and are equipped with certain 2011-2013 model year I-6 engines with feature codes 12NUK, 12NUL, 12NUM, 12NUN, 12NUP, 12NUR, 12NUS, 12NUT, 12NUU, 12NUV, 12NUX, 12NUY and 12NUZ. The injection pressure regulator (IPR) harness wire may break due to vibrational damage. This could cause an unexpected shut down of the engine.

    Risque: An unexpected engine shut down while driving may increase the risk of a vehicle crash.

    Correctif: Navistar will notify owners, and dealers will replace the IPR wire connector free of charge. The safety recall began on March 15, 2013. Owners may contact Navistar at 1-800-448-7825.

  • PARKING BRAKE:DRIVELINE:AIR:CHAMBER#12V465000en anglais seulement

    Navistar is recalling certain model year 2013 International 8600, 2012 and 2013 Durastar, 2011-2013 ProStar, and 2012 WorkStar trucks, manufactured from November 23, 2010, through April 02, 2012, and equipped with piston spring brake feature code 04EVP. The piston bore area of the parking brake chamber may have an air leak could result in the parking brake not fully releasing.

    Risque: If the parking brake does not fully release, the service brakes may lock up without warning, increasing the risk of a crash.

    Correctif: Navistar will notify owners, and dealers will replace the spring brake chamber free of charge. The safety recall began on November 6, 2012. Owners may contact Navistar at 1-331-332-1590.

  • SERVICE BRAKES, AIR:DISC#12V403000en anglais seulement

    Navistar is recalling certain model year 2011-2013 International vehicles manufactured from November 2, 2010 through May 25, 2012, equipped with Bendix air disc brakes. Bolts that fasten the air disc brake caliper to the caliper mounting plate may not have been tightended to their specified torque. This may cause the mouting bolts to become loose and possibly allow the air disc brake caliper to separate from the caliper mounting plate, resulting in an unexpected pull condition during braking application or an unexpected increase in stopping distance.

    Risque: An unexpected pull condition during braking application or an unexpected increase in stopping distance, increases the risk of a crash, leading to property damage, personal injury, or death.

    Correctif: Navistar will notify owners, and dealers will replace any missing caliper mounting bolts and tighten caliper mounting bolts, free of charge. The safety recall began on October 30, 2012. Owners may contact Navistar at 1-331-332-1590.

  • VISIBILITY:WINDSHIELD#12V283000en anglais seulement

    NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2013 INTERNATIONAL DURASTAR TRUCKS, MANUFACTURED FROM FEBRUARY 12, 2012, THROUGH MARCH 19, 2012, EQUIPPED WITH CAB CODES 16030 OR 16AAK. THE WINDSHIELD AND BACKLIGHT GLASS ON THESE VEHICLES WERE INSTALLED WITHOUT PRIMER SEAL APPLICATION. OVER TIME, THIS MAY CAUSE SEPARATION FROM THE CAB.

    Risque: WITHOUT THE PROPER BOND, THE WINDSHIELD AND/OR BACKLIGHT GLASS COULD SEPARATE FROM THE CAB, RESULTING IN INCREASED RISK OF PERSONAL INJURY OR DEATH.

    Correctif: NAVISTAR WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE WINDSHIELD AND BACKLIGHT GLASS ON AFFECTED VEHICLES, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 18, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

  • SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE#12V052000en anglais seulement

    NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION.

    Risque: UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH. ALSO, THE BRAKES MAY BE APPLIED WITHOUT ILLUMINATING THE BRAKE LIGHTS, FAILING TO GIVE PROPER WARNING TO OTHER DRIVERS.

    Correctif: NAVISTAR WILL NOTIFY OWNERS, AND DEALERS WILL PROVIDE A TEMPORARY REPAIR UNTIL BENDIX DEVELOPS A PERMANENT REMEDY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 10, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Ce rappel vise-t-il mon véhicule?

Association par marque, modèle et année-modèle. Plusieurs rappels ne visent que certaines plages de NIV — confirmez auprès de votre concessionnaire avec votre NIV complet.

Quoi faire

Les correctifs de rappel sont gratuits chez un concessionnaire franchisé dans les deux pays. Pour confirmer qu'un rappel vise votre véhicule précis ou pour prendre rendez-vous, adressez-vous à votre fabricant ou concessionnaire avec votre NIV complet, ou utilisez le canal officiel :

Vérifier un NIV de 2013 International Durastar

Un décodage de NIV confirme l'année-modèle, la version et l'usine exactes de votre véhicule, puis relance cette même recherche de rappels.

Sources de données et limites de couverture