Does the 2010 Winnebago View have any recalls?

Transport Canada lists 2 campaigns and the U.S. NHTSA lists 4 for the 2010 Winnebago View. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2010 Winnebago View?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2010 Winnebago View recalls

6 safety recall campaigns have been filed for the 2010 Winnebago View with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 02
U.S. recalls: 04
Total campaigns: 06

Transport Canada recalls

Seats And Restraints#2010332October 5, 2010
245 units affected
On certain motorhomes, the dinette area seatbelts may not conform to Canada Motor Vehicle Safety Standard 210 - Seatbelt Assembly Anchorages. Two seatbelt assemblies were placed side by side using three anchorage bolts rather than four bolts. During a crash, stress can cause the attachment to tear and allow the anchor to separate from the body of the vehicle. Failure of the seatbelt anchorage to restrain the occupant as intended would increase the risk of personal injuries during a crash. Correction: Dealers will install additional seatbelt anchorage bolts.
Seats And Restraints#2010179June 3, 2010
3 units affected
Certain motorhomes may have a bolt missing from the driver and/or passenger seat. As a result, the seat and/or seatbelt may not function as designed during a vehicle crash. Failure of the seat and/or seatbelt to restrain the occupant as intended would increase the risk of personal injury during a crash. Correction: Dealers will inspect and, if necessary, install a bolt on both front seats.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS#12V559000December 3, 2012
Winnebago is recalling certain model year 2009-2013 model Era motorhomes, 2010-2013 Via and Itasca Reyo motorhomes, and 2011-2013 View and Itasca Navion motorhomes; manufactured November 13, 2007, through August 20, 2012. The proper fuses were not installed for the refrigerator circuits.
Risk: Without the proper fuse, heat can build which could lead to a vehicle fire.
Remedy: Winnebago will notify owners, and dealers will replace the fuses. The recall began on December 21, 2012. Consumers may contact Winnebago Industries owner relations at 1-641-585-6939.
SEAT BELTS#10V470000October 5, 2010
WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2011 WINNEBAGO VIEW AND ITASCA NAVION MOTOR HOMES BECAUSE THE DINETTE AREA SEAT BELT RESTRAINTS ON THOSE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." IN A COLLISION, THE GENERATED CRASH FORCES CAN CAUSE THE RESTRAINT'S ATTACHMENT TO TEAR AND ALLOW THE ANCHOR TO SEPARATE FROM THE BODY OF THE VEHICLE.
Risk: IF THE RESTRAINT SEPARATES FROM THE VEHICLE DURING A CRASH, THE BELT WILL NOT PROPERLY RESTRAIN THE SEAT OCCUPANT, INCREASING THE RISK OF INJURY OR DEATH TO THE OCCUPANT.
Remedy: WINNEBAGO WILL ADD ADDITIONAL SEAT BELT ANCHORAGES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 12, 2010. OWNERS MAY CONTACT WINNEBAGO AT 1-800-537-1885.
SEATS#10V248000June 1, 2010
WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2010 VIEW, VIEW PROFILE, ITASCA NAVION, AND NAVION IQ MOTOR HOMES MANUFACTURED FROM APRIL 27, 2009 THROUGH JANUARY 21, 2010. THESE VEHICLES MAY HAVE A MISSING BOLT IN THE DRIVER AND/OR PASSENGER SEATS.
Risk: IF A BOLT IS MISSING, THE SEAT AND/OR SEAT BELT MAY NOT FUNCTION AS DESIGNED IN THE EVENT OF A CRASH, INCREASING THE RISK OF INJURY OR DEATH.
Remedy: DEALERS WILL CHECK FOR THE EXISTENCE AND TORQUE OF THE SEAT BOLTS AND INSTALL AND/OR REPLACE AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 30, 2010. OWNERS MAY CONTACT WINNEBAGO AT 641-585-6939.
SEATS#09V500000December 30, 2009
WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2010 VIEW AND ITASCA NAVION MOTOR HOMES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS," AND FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY." THE SEATS ARE MISSING A REINFORCING PLATE.
Risk: THIS DOES NOT MEET THE REQUIREMENTS OF THE STANDARD.
Remedy: DEALERS WILL REMOVE THE SWIVEL AND INSTALL A NEW DESIGN OF SWIVEL THAT DOES NOT REQUIRE A REINFORCING PLATE IN ORDER TO MEET THE STANDARD. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 15, 2010. OWNERS MAY CONTACT WINNEBAGO AT 1-800-537-1885.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2010 Winnebago View VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →