RECALLS — MAKE · MODEL · YEAR
2015 Toyota Yaris recalls
8 safety recall campaigns have been filed for the 2015 Toyota Yaris with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 04
- U.S. recalls
- 04
- Total campaigns
- 08
Transport Canada recalls
04- Electrical#2021723
55,683 units affected
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
- Airbag#2019197
17,546 units affected
Issue: Over time, the wiring to the side airbag sensors in the front doors could corrode. This could cause the front seat-mounted side airbags and curtain shield airbags not to work properly. Note: This problem would cause the airbag warning light (SRS warning) to turn on. Safety Risk: Airbags that do not work properly in a crash could create an increased risk of injury. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to replace the front door wire harness assemblies, as necessary.
- Suspension#2016256
1,836 units affected
On certain vehicles, the front strut mount bearing components may be damaged when a high load is applied to the strut, such as when the vehicle is driven over a large bump. If the vehicle is operated with a damaged bearing, it could cause the upper strut rod assembly to separate, resulting in a loss of vehicle stability which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the strut mounting bearing with improved ones. If damage is found on the bearing, dealers will also replace the strut and front suspension support sub-assembly.
- Suspension#2015070
72 units affected
On certain vehicles, the rear axle hub bearing assembly bolt may not have been tightened properly. This could cause the bolts to become loose and detach from the hub assembly, which could damage the rear brake components. This could increase stopping distances and could also potentially cause wheel lock up, resulting in vehicle instability increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect bolts and tighten to specification. If bolts are missing, the rear axle hub bearing assembly and rear brake components will be replaced.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
04- AIR BAGS:SIDE/WINDOW#19V319000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2015-2017 Yaris vehicles. The wire harnesses for the side air bag sensors located within the front doors may crack and corrode, possibly causing the non-deployment or improper deployment of the front seat side air bags and the curtain shield air bags.
Risk: In the event of a crash, front seat side air bags and curtain shield air bags that do not deploy as intended can increase the risk of injury.
Remedy: Toyota will notify owners, and dealers will replace the wire harness assembly in the front doors, as necessary, free of charge. The recall began June 7, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is K1F/K0F.
- SUSPENSION:FRONT:SHOCK ABSORBER#16V367000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2015 Yaris vehicles manufactured January 13, 2015, to February 27, 2015. The front strut mounting bearings can be damaged when a high load is applied to the strut, such as driving over a large bump.
Risk: A damaged strut mounting bearing may cause the strut rod to separate, causing a loss of vehicle stability and increasing the risk of a crash.
Remedy: Toyota will notify owners, and dealers will replace the strut mounting bearings and, as necessary, replace the strut and front suspension support sub-assembly, free of charge. Remedy parts are currently unavailable. Interim notices were mailed to owners July 12, 2016. The recall began on September 29, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G0S.
- STRUCTURE#15V134000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2012-2015 Yaris vehicles manufactured August 31, 2011, to February 9, 2015, and sold or registered in Puerto Rico. The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 201, " Occupant Protection in Interior Impact."
Risk: If the vehicles are equipped with a headliner that does not meet the impact requirements, there is an increased risk of occupantl injury in the event of a crash.
Remedy: Toyota will notify owners, and dealers will replace the headliner, free of charge. The recall began on June 22, 2015. Owners may contact Toyota customer service at 1-800-331-4331.
- SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY#15V098000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2015 Yaris vehicles manufactured September 8, 2014, to January 9, 2015. The affected vehicles may have improperly tightened rear axle bearing bolts.
Risk: The improperly tightened bolts may loosen during vehicle operation and may potentially cause the wheel to lock up or may damage the rear brake components, reducing their effectiveness. Either condition increases the risk of a crash.
Remedy: Toyota will notify owners, and dealers will inspect the rear axle bearing bolts, tightening them as necessary, free of charge. The recall began during April 3, 2015. Owners may contact Toyota customer service at 1-800-331-4331.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2015 Toyota Yaris VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.