RECALLS — MAKE · MODEL · YEAR
2019 Toyota C-HR recalls
6 safety recall campaigns have been filed for the 2019 Toyota C-HR with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 03
- U.S. recalls
- 03
- Total campaigns
- 06
Transport Canada recalls
03- Electrical#2021723
55,683 units affected
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
- Seats And Restraints#2019618
907 units affected
Issue: On certain vehicles, the rear seat belts may be assembled incorrectly. As a result, the seat belts may not properly lock-up in certain types of crashes. Safety Risk: A seat belt that does not work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the rear seat belt assemblies. They will be replaced as necessary.
- Suspension#2018559
609 units affected
On certain vehicles, one or more of the rear axle bearing bolts may not have been properly tightened during assembly. This could cause the bolt(s) to become loose and eventually detach, which could damage the rear brakes or could cause the rear wheel(s) to detach. This may result in a reduction in brake performance and a loss of vehicle stability, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the rear axle hub bearing bolts. If a bolt is found to be loose or detached, the dealer will replace the rear axle hub bearing assembly and rear axle carrier sub-assembly.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
03- SEAT BELTS: REAR/OTHER:BUCKLE ASSEMBLY#19V877000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.
Risk: In the event of a crash involving multiple impacts, the seat belt may not properly restrain the occupant, increasing the risk of injury.
Remedy: Toyota will notify owners, and dealers will inspect the rear seat belt assembly production dates, and replace the assemblies, as necessary, free of charge. The recall began February 7, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 19TB22 and 19TA22.
- EQUIPMENT:OTHER:LABELS#19V244000
Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Risk: If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
Remedy: GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1.
- POWER TRAIN:AXLE HUBS#18V710000
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota C-HR vehicles. The rear axle hub bearing bolts may have been insufficiently tightened, causing the bolts to loosen and damage the rear brake components or cause a rear wheel to detach.
Risk: If the bolts loosen and damage the rear brake components, or cause a rear wheel to detach, it would increase the risk of a crash.
Remedy: Toyota will notify owners, and dealers will inspect the rear axle hub bearing bolts. If a bolt is found to be loose or detached, the dealer will replace the rear axle hub bearing assembly and rear axle carrier sub-assembly, free of charge. The recall began November 6, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0Y.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2019 Toyota C-HR VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.