RECALLS — MAKE · MODEL · YEAR
2013 Subaru Impreza WRX recalls
9 safety recall campaigns have been filed for the 2013 Subaru Impreza WRX with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 09
- U.S. recalls
- 00
- Total campaigns
- 09
Transport Canada recalls
09- Airbag#2020001
23,159 units affected
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag inflator. The passenger-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
- Electrical#2019191
100 units affected
Issue: A problem with certain replacement ignition switches may allow the key turn out of the “ON” position while driving. This could cause the engine to turn off suddenly. It could also cause the airbag system not to work properly in a crash. Note: This is a voluntary service campaign that is not being conducted under the requirements of the Motor Vehicle Safety Act. This problem only affects certain parts used for replacement of original parts. Safety Risk: A sudden loss of engine power could increase the risk of a crash. An airbag system that does not work properly in a crash could cause an increased risk of injuries. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the ignition switch, and replace it as necessary.
- Brakes#2019104
135,814 units affected
Issue: On certain vehicles, the brake lamp switch could fail. This would cause the brake lamps not to turn on when the brakes are applied. Depending on the model, this could cause an inability to shift from park or to start using the push-button ignition. This may also cause problems with the following: anti-lock brake system (ABS), vehicle dynamics control (VDC), and/or Eyesight system. Safety Risk: If the brake lights do not work, a following driver may not to recognize that a vehicle ahead is braking, increasing the risk of crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the brake lamp switch replaced.
- Airbag#2019013
102,110 units affected
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
- Engine#2018606
19,164 units affected
On certain vehicles, the engine valve springs could fracture, causing an engine failure or a stall with an inability to restart. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the engine valve springs. Note: A driver may notice abnormal noise and/or vibration prior to an engine failure or stalling.
- Electrical#2016492
15,378 units affected
On certain turbocharged vehicles, the relay which controls the secondary air injection pump may have been manufactured incorrectly. As a result, the relay may allow the pump to operate continuously. If this condition were to occur, the pump may overheat and melt, causing burning smell or smoke and possibly resulting in a fire. This could increase the risk of injury and/or damage to property. Correction: Dealers will install a revised relay.
- Brakes#2014586
33,000 units affected
On certain vehicles, the center and rear brake lines may become perforated due to corrosion. This would cause a leak in the brake system potentially increasing stopping distances, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect vehicles and either apply an anti-corrosion coating to the 4-way joint connector and brake lines, or replace them as necessary. Note: This recall supersedes recall 2013092 and 2014223. Vehicles that were inspected and/or repaired under the previous recall will require re-inspection and/or repair.
- Brakes#2014223
105,649 units affected
On certain vehicles, the center and rear brake lines may become perforated due to corrosion. This would cause a leak in the brake system potentially increasing stopping distances, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect vehicles and either apply an anti-corrosion coating to the lines, or replace them as necessary. Note: This recall supersedes recall 2013092. Vehicles that were inspected and/or repaired under the previous recall will require re-inspection and/or repair.
- Accessories#2013063
2,813 units affected
On certain vehicles equipped with a dealer-installed accessory remote engine starter, if the fob is dropped, movement of the internal battery retaining clip may occur and cause damage to a component on the printed circuit board. Under this condition, the fob may transmit an engine start (or stop) request without the user pressing the button. If the vehicle is in range and receives the request, the engine may start and run for up to 15 minutes (or until a stop request is received). The engine may continue to start and stop until the fob battery is depleted, or until the vehicle runs out of fuel. If that occurs when the vehicle is parked in an enclosed area, such as a garage, there is a risk of carbon monoxide build-up, which could result in asphyxiation or carbon monoxide poisoning. Correction: Dealers will replace the remote engine starter fob.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
00No recalls found for this make, model, and year.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2013 Subaru Impreza WRX VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.