Does the 2020 Rosenbauer Warrior have any recalls?

Transport Canada lists 3 campaigns and the U.S. NHTSA lists 6 for the 2020 Rosenbauer Warrior. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2020 Rosenbauer Warrior?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2020 Rosenbauer Warrior recalls

9 safety recall campaigns have been filed for the 2020 Rosenbauer Warrior with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 03
U.S. recalls: 06
Total campaigns: 09

Transport Canada recalls

Lights And Instruments#2025386July 22, 2025
85 units affected
Issue: On certain fire trucks, a problem with the gauge cluster could cause the odometer reading to freeze or to display incorrect information. This error could lead you not to know how far the truck has travelled. As a result, an owner could miss or delay important vehicle maintenance. Safety Risk: Missed or delayed vehicle maintenance could lead to a part failure and increase the risk of a crash. Corrective Actions: Rosenbauer will notify owners by mail and advise you to take your vehicle to a dealership to replace the gauge cluster.
Label#2021454July 23, 2021
170 units affected
Issue: On certain fire trucks, the compliance label may not list the correct tire inflation pressures. This could lead you to underinflate the tires. Driving a vehicle with underinflated tires could cause poor handling and/or a tire failure. Safety Risk: Tires that are not properly inflated could increase the risk of a crash. Corrective Actions: Rosenbauer will notify owners by mail and instruct you to take your vehicle to a dealer to verify that the compliance label has the correct tire inflation pressures. They will replace it with a corrected label, if required.
Fuel System#2021277May 11, 2021
62 units affected
Issue: On certain vehicles, the fuel rail assembly could develop a leak. Note: This recall only affects vehicles equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your vehicle to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL#25V475000July 21, 2025
Rosenbauer America (Rosenbauer) is recalling certain 2019-2022 Avenger, 2019-2024 Commander, and Warrior fire trucks equipped with an Innovative Controls instrument panel. A software error may cause the odometer to freeze and not display accurate mileage.
Risk: An inaccurate odometer reading can unintentionally delay critical safety-related maintenance, potentially impairing the safe operation of the vehicle and increasing the risk of a crash.
Remedy: Dealers will replace the instrument panel, free of charge. Owner notification letters were mailed September 10, 2025. Owners may contact Rosenbauer customer service at 1-651-462-1000.
ELECTRICAL SYSTEM#23V894000December 22, 2023
Rosenbauer America is recalling certain 2020-2022 Avenger, 2017-2024 Commander, 2020-2024 Warrior, 2023 Commercial F-350, F-550, 108SD, and 2024 Commercial 114SD vehicles. In the event of a short circuit or wiring failure, the firmware may fail to shut off the output pin, resulting in overloaded electrical circuits.
Risk: Overloaded electrical circuits can overheat, increasing the risk of fire.
Remedy: Dealers will update the firmware, free of charge. Owner notification letters were mailed February 22, 2024. Owners may contact Rosenbauer America customer service at 1-651-462-1000.
STEERING:RACK AND PINION#22V025000January 21, 2022
Rosenbauer America (Rosenbauer) is recalling certain 2021 Commander and Warrior vehicles equipped with Meritor 180 series drive pinions. The rear axle drive pinion may fracture.
Risk: A fractured drive pinion may contact the brake drop hose, and unintentionally engage the parking brake without detection, or without the brake lights activating, increasing the risk of a crash.
Remedy: Meritor will inspect and replace the drive pinion, as necessary, free of charge. Owner notification letters were mailed on April 27, 2022. Owners may contact Rosenbauer customer service at 1-651-462-1000.
FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL#22V001000January 1, 2022
Rosenbauer America (Rosenbauer) is recalling certain 2018-2021 Commander, 2018-2020 Warrior, and 2020-2022 Commercial 114SD vehicles. The fuel tubes between the fuel rail and the injector for cylinders 4, 5, and 6 may be susceptible to cracking, resulting in a high-pressure fuel leak.
Risk: A high-pressure fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Cummins dealers will install vibration isolators, and replace the fuel tubes as necessary, free of charge. Owner notification letters were mailed on March 8, 2022. Owners may contact Cummins customer service at 1-800-286-6467.
FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL#21V334000May 11, 2021
Rosenbauer America (Rosenbauer) is recalling certain 2016-2021 Commander, Warrior, Avenger, and 2019 Commercial M2 106 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Dealers will inspect and replace the rail as necessary, free of charge. Interim owner notification letters were mailed on July 9, 2021. Owners may contact Rosenbauer customer service at 1-651-462-1000.
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL#20V779000December 15, 2020
Rosenbauer America (Rosenbauer) is recalling certain 2018-2021 Commander, 2020 Warrior, 2020-2021 Commercial, and 2020 Avenger vehicles equipped with Weldon V-Mux Vista IV Standard LCD displays used for controlling emergency vehicle lighting and HVAC functions. These displays may experience low voltage spikes and cause the LCD display to lock up or become nonfunctional, due to varying electrical installations.
Risk: If the LCD display becomes locked up or non-functional it can delay emergency efforts, which can increase the risk of injury.
Remedy: Rosenbauer will notify owners, and dealers will repair or replace the IV Standard LCD displays, free of charge. The recall March 3, 2021. Owners may contact Rosenbauer customer service at 1-651-462-1000. Rosenbauer's number for this recall is 20E-078.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2020 Rosenbauer Warrior VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →