Does the 2019 Rosenbauer Avenger have any recalls?

Transport Canada lists 4 campaigns and the U.S. NHTSA lists 2 for the 2019 Rosenbauer Avenger. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2019 Rosenbauer Avenger?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2019 Rosenbauer Avenger recalls

6 safety recall campaigns have been filed for the 2019 Rosenbauer Avenger with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 04
U.S. recalls: 02
Total campaigns: 06

Transport Canada recalls

Lights And Instruments#2025386July 22, 2025
85 units affected
Issue: On certain fire trucks, a problem with the gauge cluster could cause the odometer reading to freeze or to display incorrect information. This error could lead you not to know how far the truck has travelled. As a result, an owner could miss or delay important vehicle maintenance. Safety Risk: Missed or delayed vehicle maintenance could lead to a part failure and increase the risk of a crash. Corrective Actions: Rosenbauer will notify owners by mail and advise you to take your vehicle to a dealership to replace the gauge cluster.
Fuel System#2022003January 8, 2022
18 units affected
Issue: On certain fire trucks, the fuel tubes between the fuel rail and the injectors may crack and create a fuel leak. Note: This recall only affects fire trucks equipped with a Cummins X12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Rosenbauer will notify owners by mail and instruct you to take your fire truck to a Cummins authorized service center to replace the fuel tubes for cylinders 4, 5 and 6 and install vibration isolators.
Label#2021454July 23, 2021
170 units affected
Issue: On certain fire trucks, the compliance label may not list the correct tire inflation pressures. This could lead you to underinflate the tires. Driving a vehicle with underinflated tires could cause poor handling and/or a tire failure. Safety Risk: Tires that are not properly inflated could increase the risk of a crash. Corrective Actions: Rosenbauer will notify owners by mail and instruct you to take your vehicle to a dealer to verify that the compliance label has the correct tire inflation pressures. They will replace it with a corrected label, if required.
Fuel System#2021277May 11, 2021
62 units affected
Issue: On certain vehicles, the fuel rail assembly could develop a leak. Note: This recall only affects vehicles equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your vehicle to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL#25V475000July 21, 2025
Rosenbauer America (Rosenbauer) is recalling certain 2019-2022 Avenger, 2019-2024 Commander, and Warrior fire trucks equipped with an Innovative Controls instrument panel. A software error may cause the odometer to freeze and not display accurate mileage.
Risk: An inaccurate odometer reading can unintentionally delay critical safety-related maintenance, potentially impairing the safe operation of the vehicle and increasing the risk of a crash.
Remedy: Dealers will replace the instrument panel, free of charge. Owner notification letters were mailed September 10, 2025. Owners may contact Rosenbauer customer service at 1-651-462-1000.
FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL#21V334000May 11, 2021
Rosenbauer America (Rosenbauer) is recalling certain 2016-2021 Commander, Warrior, Avenger, and 2019 Commercial M2 106 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Dealers will inspect and replace the rail as necessary, free of charge. Interim owner notification letters were mailed on July 9, 2021. Owners may contact Rosenbauer customer service at 1-651-462-1000.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2019 Rosenbauer Avenger VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →