RECALLS — MAKE · MODEL · YEAR
2021 Peterbilt 348 recalls
6 safety recall campaigns have been filed for the 2021 Peterbilt 348 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 02
- U.S. recalls
- 04
- Total campaigns
- 06
Transport Canada recalls
02- Fuel System#2021323
19 units affected
Issue: On certain trucks, the fuel rail assembly could develop a leak. Note: This recall only affects trucks equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.
- Suspension#2020399
502 units affected
Issue: On certain trucks, the lift axle pivot bolts may be too short and may not be properly tightened. As a result, the bolts could come loose or break. If this happens, parts could fall from the truck. Note: This recall only affects trucks built with Watson Chalin SL2065 lift axles. Safety Risk: Large fasteners that fall on the road could create a road hazard for others and increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealer to inspect and replace the lift axle pivot bolts, as necessary.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
04- SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE#24V915000
PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
Risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.
- FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL#21V391000
PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.
- SERVICE BRAKES, AIR:DISC:CHAMBER#21V328000
PACCAR Incorporated (PACCAR) is recalling certain 2021 Peterbilt 348 and 579 vehicles. The spring brake chamber may have been assembled with incorrect springs that were out of specification, which may cause the pressure plate to shift.
Risk: The pressure plate may tear the diaphragm, causing a loss of air pressure and increasing the risk of a crash.
Remedy: Dealers will replace brake chambers, free of charge. Owner notification letters were mailed on July 9, 2021. Owners may contact PACCAR (Peterbilt) customer service at 1-940-591-4220. PACCAR's number for this recall is 21PBE.
- POWER TRAIN:AXLE ASSEMBLY#20V506000
PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.
Risk: The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.
Remedy: PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 20PBE and 20KWC.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2021 Peterbilt 348 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.