Does the 2011 Mitsubishi RVR have any recalls?

Transport Canada lists 10 campaigns and the U.S. NHTSA lists 0 for the 2011 Mitsubishi RVR. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2011 Mitsubishi RVR?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2011 Mitsubishi RVR recalls

10 safety recall campaigns have been filed for the 2011 Mitsubishi RVR with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 10
U.S. recalls: 00
Total campaigns: 10

Transport Canada recalls

Label#2024554September 19, 2024
258,000 units affected
Issue: On certain vehicles, the compliance label may be missing information in French. The words and abbreviations listed on the label for "TIRES", "RIMS", "WITH", "FR" and "RR" and appear in English only, when they should be listed as "TIRES/PNEUS", "RIMS/JANTES", "WITH/AVEC", "FR/AVT" and "RR/ARR". Canadian regulations require this information to be listed on the label in both English and French. Safety Risk: These small errors do not affect vehicle safety. Corrective Actions: This is not a recall. Mitsubishi has corrected the compliance label for all new vehicles.
Structure#2020216May 15, 2020
81,449 units affected
Issue: On certain vehicles, road salt can corrode the front cross-member (subframe). As a result, a lower control arm could eventually detach from the cross-member. This could cause a loss of vehicle control. Safety Risk: A loss of control can create the risk of a crash. Corrective Actions: Mitsubishi will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front cross-member (subframe). If no significant corrosion is found, the dealer will spray a sealing and anti-corrosion coating both inside and on the cross-member. If significant corrosion is found, the dealer will replace the cross-member.
Visual System#2018083February 12, 2018
37,654 units affected
On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper link rod with a countermeasure one, and will inspect the wiper motor crank arm and replace as necessary.
Electrical#2018052January 26, 2018
45,050 units affected
On certain vehicles, the flange of the drive belt automatic tensioner may crack over time due to repetitive high load operations and stress concentration. This could cause the drive belt to detach, leading to battery depletion, which would result in a loss of motive power and a loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the auto tensioner with a countermeasure unit.
Structure#2016591November 24, 2016
16,244 units affected
On certain vehicles, the outer tubes of the rear liftgate support struts may have had insufficient anti-corrosion treatment applied during manufacturing. As a result, the outer tube could corrode due to salt and water penetration. If this were to occur, the liftgate support strut could rapidly lose pressure, which would allow the liftgate to drop suddenly, placing anyone beneath or near the gate at risk of injury. Correction: Dealers will replace the rear liftgate support struts with updated ones.
Visual System#2016530October 27, 2016
27,982 units affected
On certain vehicles, water may drain from the windshield cowl area and potentially collect in the area of the wiper motor breathing hole. If the wiper motor is not operating, water could potentially enter the wiper motor through the breathing hole. If this occurs, over time, it could result in corrosion and/or an electrical conduction failure, both of which could result in the wiper motor not operating. If the wiper motor were to stop operating, the windshield wipers would become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper motor with an upgraded wiper motor that will prevent water intrusion.
Heater And Defroster#2015166April 17, 2015
32,810 units affected
On certain vehicles, the blower motor may have been incorrectly manufactured. This could result in a premature failure of the blower motor which could affect the defroster performance resulting in reduced visibility, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace blower motor and the power transistor as needed.
Engine#2014397September 15, 2014
49,227 units affected
On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.
Brakes#2014396September 15, 2014
1 units affected
On certain vehicles, a defect in the brake booster may prevent the brake pedal from returning properly. An unexpected change in pedal position could increase the risk of a crash causing injury/damage to property. Correction: Dealers will inspect, and if required, replace the brake booster with a revised unit.
Other#2013215June 21, 2013
1,409 units affected
On certain vehicles, primer may not have been applied during installation of the panoramic glass roof. Reduced adhesion could allow the glass roof to completely detach from the vehicle, possibly striking another vehicle, a stationary object, or a bystander, causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, remove and correctly reinstall the panoramic glass roof.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

No recalls found for this make, model, and year.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2011 Mitsubishi RVR VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →