Does the 2010 Mitsubishi Endeavor have any recalls?

Transport Canada lists 2 campaigns and the U.S. NHTSA lists 2 for the 2010 Mitsubishi Endeavor. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2010 Mitsubishi Endeavor?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2010 Mitsubishi Endeavor recalls

4 safety recall campaigns have been filed for the 2010 Mitsubishi Endeavor with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 02
U.S. recalls: 02
Total campaigns: 04

Transport Canada recalls

Label#2024554September 19, 2024
258,000 units affected
Issue: On certain vehicles, the compliance label may be missing information in French. The words and abbreviations listed on the label for "TIRES", "RIMS", "WITH", "FR" and "RR" and appear in English only, when they should be listed as "TIRES/PNEUS", "RIMS/JANTES", "WITH/AVEC", "FR/AVT" and "RR/ARR". Canadian regulations require this information to be listed on the label in both English and French. Safety Risk: These small errors do not affect vehicle safety. Corrective Actions: This is not a recall. Mitsubishi has corrected the compliance label for all new vehicles.
Fuel System#2011012January 10, 2011
4,969 units affected
Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filler pipe of vehicles equipped with the first-generation version. Vehicles assembled with the second-generation filler pipe will be inspected and, if severe corrosion on the fuel filler pipe is observed, the pipe will be replaced with a third-generation version. For vehicles where corrosion of the fuel filler pipe is not observed, an anti-corrosion wax-like material will be applied to the filler pipe, and the inner wheel well shield will be replaced with an updated part that provides improved protection against mud intrusion and accumulation. ** Note: This recall supersedes recall 2010050.**

Canadian data updated August 24, 2026

U.S. NHTSA recalls

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP#10V065000February 25, 2010
MITSUBISHI IS RECALLING CERTAIN MODEL YEAR 2004-2010 ENDEAVOR VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND WASHINGTON D.C. COLD STATES INCLUDE NORTH DAKOTA, SOUTH DAKOTA, NEBRASKA, KANSAS, OKLAHOMA, COLORADO, WYOMING, MONTANA, IDAHO, WASHINGTON, OREGON, AND UTAH. ADJOINING STATES INCLUDE ARKANSAS, TENNESSEE, AND NORTH CAROLINA. IN SEVERE CORROSIVE ENVIRONMENTS WHERE ROAD SALTS ARE FREQUENTLY USED IN WINTER VEHICLES MAY BE EXPOSED TO ROAD DEBRIS (MUD) MIXED WITH ROAD SALT. THIS MATERIAL CAN BECOME TRAPPED BETWEEN A REINFORCING BRACKET AND THE FUEL FILLER PIPE, POTENTIALLY CAUSING CORROSION. OVER TIME, CORROSION COULD CREATE A LEAK IN THE FUEL FILLER PIPE THAT COULD RESULT IN A FUEL LEAKAGE WHEN FUELING THE VEHICLE.
Risk: FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
Remedy: DEALERS WILL REPLACE THE FUEL FILLER PIPE WITH A NEW IMPROVED PART FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JULY 5, 2010. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
AIR BAGS#09V361000September 16, 2009
MITSUBISHI MOTORS NORTH AMERICA, INC. (MMNA) IS RECALLING CERTAIN MODEL YEAR 2010 ENDEAVOR MODEL VEHICLES MANUFACTURED BETWEEN MAY 26 AND JULY 28, 2009. THE RETAINER BRACKET USED FOR THE SEAT-MOUNTED SIDE AIRBAG FRAMES ON BOTH THE DRIVER AND FRONT PASSENGER SEATS MAY NOT HAVE BEEN PROPERLY WELDED.
Risk: IF THIS CONDITION EXISTS, THE FRONT SEAT-MOUNTED AIRBAGS MAY NOT DEPLOY CORRECTLY IN A SIDE IMPACT CRASH, POSSIBLY RESULTING IN INJURY TO THE SEAT OCCUPANT.
Remedy: MMNA WILL NOTIFY OWNERS AND DEALERS WILL INSPECT THE WELD CONDITION OF THE SIDE AIRBAG RETAINER BRACKET ON THE FRONT PASSENGER SEATS. IF THE WELD IS INSUFFICIENT, THE DEALER WILL REPLACE THE SEATBACK ASSEMBLY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 30, 2009. OWNERS MAY CONTACT MITSUBISHI CUSTOMER RELATIONS DEPARTMENT AT 1-888-648-7820.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2010 Mitsubishi Endeavor VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →