Does the 2015 Mack MRU have any recalls?

Transport Canada lists 6 campaigns and the U.S. NHTSA lists 3 for the 2015 Mack MRU. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2015 Mack MRU?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2015 Mack MRU recalls

9 safety recall campaigns have been filed for the 2015 Mack MRU with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 06
U.S. recalls: 03
Total campaigns: 09

Transport Canada recalls

Electrical#2017216April 19, 2017
40 units affected
Certain vehicles may have been built with an incorrectly sized alternator cable. This could potentially result in the cable overheating, which may increase the risk of a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the alternator cable.
Powertrain#2016495October 11, 2016
1,690 units affected
On certain vehicles, the cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may prematurely loosen. If the nut were to loosen and come off, the yoke could separate from the axle input shaft and cause the drive shaft to disconnect. A disconnected drive shaft would result in a loss of motive power, and create a road hazard, both of which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the torque on the cap nut, and the nut will be replaced if the torque is found under specification. Note: This is an expansion of recall 2016-079.
Powertrain#2016079February 18, 2016
1,068 units affected
On certain vehicles, the cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may prematurely loosen. If the nut were to loosen and come off, the yoke could separate from the axle input shaft and cause the drive shaft to disconnect. A disconnected drive shaft would result in a loss of motive power, and create a road hazard, both of which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the cap nut, and inspect the threads on the input shaft. If the threads are damaged, the input shaft will be replaced.
Engine#2015500October 23, 2015
364 units affected
On certain vehicles equipped with natural gas powered engines, the turbocharger oil supply line may make contact with or interfere with one or more of the following: the turbocharger inlet elbow, the OEM clean air intake clamp, or the air fuel control tube. The resulting contact or interference may damage the turbocharger oil supply line, possibly resulting in an oil leak. Oil leaking onto hot engine surfaces could increase the risk of a fire, and could increase the risk of injury and/or property damage. Correction: Dealers will replace the oil line.
Engine#2015348July 31, 2015
258 units affected
On certain vehicles equipped with Cummins Westport ISL-G engines, excessive engine crankcase pressure could cause the vent tube assembly elbow to detach from the breather. This could allow engine oil to come in contact with hot surfaces, increasing the risk of fire resulting in injury and/or damage to property. Correction: Dealers will install clamps at both ends of the elbow of the breather tube assembly and reprogram the Electronic Control Module (ECM) to improve diagnostic capabilities.
Engine#2014090March 24, 2014
157 units affected
On certain vehicles equipped with Cummins compressed natural gas engines, incorrect engine ECU programming could cause the exhaust system temperature to become elevated during cold weather operation. This could also cause flames to be emitted from the exhaust. As a result, nearby combustible material could be ignited, increasing the risk of a fire, injury and/or damage to property. Correction: Authorized Cummins service facilities will update software programming.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

SERVICE BRAKES, AIR:ANTILOCK#25V030000January 23, 2025
Mack Trucks, Inc. (Mack) is recalling certain 2010-2018 MRU and 2019-2025 Terrapro towing vehicles. The vehicles are missing the anti-lock brake (ABS) warning light and circuitry that controls the anti-lock brake function for an attached trailer. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Risk: Driving without a functioning anti-lock brake system may result in the trailer not braking as intended, increasing the risk of a crash.
Remedy: Dealers will add an ABS warning light and circuitry, free of charge. Owner notification letters were mailed April 28, 2025. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0474.
ENGINE AND ENGINE COOLING:ENGINE#15V275000May 11, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2016 Mack MRU and LEU trucks manufactured June 25, 2010, to April 30, 2015, and 2015-2016 LR6 trucks manufactured from December 18, 2014 through March 6, 2015. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.
Risk: If engine oil comes into contact with a hot surface, there could be an increased risk of a fire.
Remedy: Cummins will notify owners on behalf of Mack, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 12, 2015. Owners may contact Mack customer service at 1-800-528-6586 or Cummins Inc. at 1-800-343-7357. Mack's number for this recall is SC0391.
ENGINE AND ENGINE COOLING:ENGINE#14V137000March 24, 2014
Mack Trucks Inc. (Mack) is recalling certain model year 2014-2015 CXU, 2010-2015 LEU, and 2011-2015 MRU vehicles manufactured with certain Cummins Westport Model ISL G and ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.
Risk: The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe.
Remedy: Cummins and Cummins Westport will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began on March 12, 2014. Customers may contact Mack at 1-336-393-2000 or Cummins Inc. at 1-800-343-7357. Mack's number for this recall is SC0377.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2015 Mack MRU VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →