RECALLS — MAKE · MODEL · YEAR
2011 Mack GU recalls
13 safety recall campaigns have been filed for the 2011 Mack GU with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 08
- U.S. recalls
- 05
- Total campaigns
- 13
Transport Canada recalls
08- Brakes#2015373
3 units affected
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 121 - Air Brake Systems. These vehicles were built with insufficient air tank reserve capacity, which may provide an insufficient air supply to properly operate the brakes during repetitive brake applications. This may result in reduced braking performance which could result in a vehicle crash. Correction: Dealers will install an air tank to increase air reservoir capacity.
- Brakes#2015372
241 units affected
On certain vehicles, The chassis electrical harness and air brake lines may not have been properly secured at the crossmember. This could cause the electrical cables and air lines to fall down and get twisted in the driveline. This could affect safety systems such as brakes, increasing stopping distances or causing unintended parking brake application. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and repair the vehicle as needed.
- Electrical#2014527
11,668 units affected
On certain model vehicles, water around the windshield can migrate into the Electronic Power Distribution Module and contaminate it. As a result, circuits may be bridged creating an electrical short. This could potentially result in a fire, increasing the risk of injury and/or damage to property. Correction: Dealers will inspect the module, and if found contaminated, will replace it. Additional measures will be taken to address the leak if contamination is found. Note: This is an expansion of recall 2014-053.
- Lights And Instruments#2014146
5,990 units affected
On certain vehicles, the directional/hazard signal flasher may fail. Actuation of the turn signal or hazard lights in this condition would cause them to remain illuminated and not flash as intended. As a result, drivers may not be able to clearly signal their intentions to turn, change lanes or warn others in an emergency situation. Correction: Dealers will replace the turn signal/hazard flasher module.
- Electrical#2014053
2,462 units affected
On certain model vehicles, water around the windshield can migrate into the Electronic Power Distribution Module and contaminate it. As a result, circuits may be bridged creating an electrical short. This could potentially result in a fire, increasing the risk of injury and/or damage to property. Correction: Dealers will inspect the module, and if found contaminated, will replace it. Additional measures will be taken to address the leak if contamination is found.
- Suspension#2011409
19 units affected
On certain trucks, the drive axle tower bracket may not have been welded correctly during the manufacturing process. This could allow the bracket to detach from the axle, which could result in a loss of vehicle control and a crash causing property damage and/or personal injury. Correction: Authorized service facilities will inspect and, if necessary, repair weld the axle assembly.
- Other#2011261
76 units affected
On certain trucks, the clutch pedal assembly may have been manufactured incorrectly and could fail. This could allow the clutch pedal to fall to the floor, prohibiting clutch operation, and causing a reduction in braking efficiency. Increased stopping distances could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the clutch pedal assembly.
- Brakes#2011182
329 units affected
On certain vehicles, the slack adjuster housings may have been manufactured incorrectly, which could allow the housings to fracture and fail. As a result, the wheel brake to which the slack adjuster is attached would no longer function, which could increase vehicle stopping distances. Should a steer axle slack adjuster fail, it could also cause the vehicle to pull to one side during braking. Either problem could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the slack adjusters.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
05- EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT#14V208000
Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
Risk: A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0379.
- ELECTRICAL SYSTEM#14V078000
Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
Risk: Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
Remedy: Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.
- ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES#11V292000
MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 GU HEAVY TRUCKS MANUFACTURED FROM SEPTEMBER 12, 2007, THROUGH APRIL 8, 2011, WITH A FOUR BATTERY CABLE DESIGN. AS A RESULT OF THE ROUTING AND CLIPPING USED, THE BATTERY CABLES MAY COME INTO CONTACT WITH FRAME HARDWARE, WHICH, AS A RESULT OF CHAFING, MAY CAUSE THE INSULATION TO BECOME WORN TO A POINT WHERE A SHORT OCCURS.
Risk: A SHORT CAN POTENTIALLY CAUSE A VEHICLE FIRE.
Remedy: DEALERS WILL RE-ROUTE THE BATTERY CABLES AND REPLACE THE CABLES IF CHAFING HAS OCCURRED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 11, 2011. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-866-1177.
- SERVICE BRAKES, AIR:SLACK ADJUSTERS:AUTOMATIC#11V272000
MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 CHU, CXU, GU, LEU AND MRU TRUCKS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.
Risk: SLACK ADJUSTERS WITH THIS FLOW NOTCH COULD CRACK UNDER NORMAL BRAKING CONDITIONS CAUSING LOSS OF BRAKING WHICH COULD RESULT IN A VEHICLE CRASH.
Remedy: MACK TRUCKS WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE SUBJECT SLACK ADJUSTERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 24, 2011. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
- SERVICE BRAKES, AIR#10V404000
MACK IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 GU AND MRU MODEL VEHICLES MANUFACTURED WITH A FRONT TOW GLAD HAND OPTION. THE ACTUATION AND RELEASE TIMING OF THE VEHICLES EXCEEDS THE LIMIT WHICH FAILS TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS."
Risk: IF THE BRAKES DO NOT PERFORM AS THEY SHOULD, A VEHICLE CRASH COULD OCCUR.
Remedy: MACK WILL NOTIFY OWNERS AND REPAIR THE VEHICLE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 1, 2011. OWNERS MAY CONTACT MACK AT 1-877-800-4945.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2011 Mack GU VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.