RECALLS — MAKE · MODEL · YEAR
2019 Mack Granite recalls
8 safety recall campaigns have been filed for the 2019 Mack Granite with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 08
- U.S. recalls
- 00
- Total campaigns
- 08
Transport Canada recalls
08- Seats And Restraints#2025531
578 units affected
Issue: On certain trucks, the passenger-side seat belt anchor may not have been secured to the floor properly. As a result, the seat belt could detach in a crash. Note: For the MD model, this recall also affects certain 2025 model year MD electric vehicles. Safety Risk: A seat belt that detaches could increase the risk of injury in a crash. Corrective Actions: Mack will notify owners by mail and advise you to take your truck to a dealership to reinforce the passenger-side seat belt anchor.
- Lights And Instruments#2023474
5,280 units affected
Issue: On certain trucks, the front turn signals may not be visible from certain angles. As a result, the trucks don't meet the requirements of the Canadian regulations. Safety Risk: Turn signals that aren't visible from certain angles may cause a person not to recognize when a driver intends to turn or change lanes. This could increase the risk of a crash. Corrective Actions: Mack will notify owners by mail and advise you to take your truck to a dealership to install additional front turn signals.
- Lights And Instruments#2022361
4,304 units affected
Issue: On certain trucks, some controls are not identified with the required symbol(s) or word(s). Specifically, the identifications for the HVAC fan control, the position side marker light control, the master lighting switch control and the turn signal control may be missing or mislabeled. Canadian regulations require the use of certain symbols and words for controls. This can help to avoid driver confusion. Safety Risk: These small errors do not affect safety or the function of the controls. Corrective Actions: This is not a recall. Mack has made changes to ensure that the controls for all new trucks are identified with the required symbol(s) and word(s).
- Lights And Instruments#2021124
4,883 units affected
Issue: On certain trucks, when the manual override is used to switch off the daytime running lamps (DRLs), the lights may not turn on again when you start driving. Canadian regulations require that if DRLs are manually turned off, they must turn on again when you start driving. Safety Risk: Driving without daytime running lights could make the vehicle less visible to others and increase the risk of a crash. Corrective Actions: Mack will notify owners by mail and instruct you to take your truck to a dealer to update the vehicle software.
- Structure#2020551
91 units affected
Issue: On certain trucks, the welds that attach the trailer hitch may crack due to improper welding. As a result, the hitch could detach from the truck while towing a trailer. Note: This recall only affects certain trucks with trailer hitches installed by Commercial Truck Equipment. Safety Risk: A trailer that detaches from a truck could create a risk of a crash. Corrective Actions: Commercial Truck Equipment will notify owners by mail and instruct you to take your truck to a dealer to inspect the trailer hitch and repair or replace it, as necessary. You should stop using the trailer hitch until the inspection and repair have been completed.
- Visual System#2019037
761 units affected
Issue: On certain vehicles, the down-view mirror may detach from the passenger’s door. Safety Risk: A mirror that falls from the vehicle could strike another vehicle or pedestrian. This may create the risk of an injury or crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to secure the mirror. The dealer will add additional fasteners and a reinforcement plate as needed.
- Tires#2018641
73 units affected
Certain trucks were equipped with Bridgestone M864, M860A or M854 wide-base tires, size 425/65R22.5, that may not conform to the endurance testing requirements of Canada Motor Vehicle Safety Standard (CMVSS) 119 - Tires for vehicles other than passenger cars. A manufacturing problem could cause a bulge or blister to be present in the sidewall of the tires. Over time, this could cause deterioration of the tire’s structure and lead to a sudden tire failure that may increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and replace affected tires as necessary.
- Lights And Instruments#2018605
98 units affected
Certain vehicles equipped with a snowplow preparation kit may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Lighting System and Retroreflective Devices. The snowplow headlamps can be turned on without other exterior lights, and the high beam indicator does not work when the snowplow high beams are turned on, which is contrary to the requirements of the standard. This could allow the vehicle to be operated with the snowplow headlamps on and marker and tail lamps off, making the vehicle harder to see and potentially increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software to correct the non-compliance.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
00No recalls found for this make, model, and year.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2019 Mack Granite VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.