Lincoln Corsair recalls

• Visual System#2026100March 5, 2026

  99,375 units affected

  Issue: On certain vehicles, a software problem could cause the rearview camera image not to display properly when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail. The corrective actions for this recall are under development.

• Visual System#2026098March 3, 2026

  54,078 units affected

  Issue: On certain vehicles, the windshield wiper motor may not have been manufactured properly. As a result, the motor could fail and cause the windshield wipers not to work. Safety Risk: Windshield wipers that don't work could reduce visibility and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the windshield wiper motor.

• Engine#2026094March 3, 2026

  6,766 units affected

  Issue: On certain vehicles, the exhaust gas recirculation (EGR) valve may not have been manufactured properly. As a result, the EGR valve could fail and cause a loss of power to the wheels. Note: This recall only affects certain vehicles equipped with a 1.5 L engine, 2.0 L gas or hybrid engine or 2.3 L engine. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the EGR valve.

• Engine#2026072February 18, 2026

  4 units affected

  Issue: On a small number of vehicles, the recall repairs completed by a Ford dealer during recall 25S54 (Transport Canada recall no. 2025-283) may not have been done correctly. As a result, another repair is required. On certain vehicles equipped with a 2.5 L HEV or PHEV engine, a manufacturing problem could lead to an engine failure. In some cases, an engine failure can create the risk of a fire. Safety Risk: An engine failure could cause a fire. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or notice reduced engine power.

• High Voltage#2026070February 18, 2026

  22,955 units affected

  Issue: On certain vehicles, the software update installed by a Ford dealer during recall 24S79 (Transport Canada recall no. 2024-781) may not be effective. As a result, a second repair is required. On certain vehicles, a problem inside the high-voltage battery could cause a short circuit. If this happens, there could be a loss of power to the wheels and/or the high-voltage battery could overheat. Note: This recall replaces Transport Canada recall no. 2025-628. This recall only affects certain plug-in hybrid vehicles (PHEV) equipped with a 2.5 L engine. Safety Risk: A loss of power to the wheels could increase the risk of a crash. A battery that overheats can create a fire risk, even while the vehicle is parked and turned off. Corrective Actions: To reduce the safety risk, Ford advises that you set the maximum charge setting of your vehicle at 80% and to only use normal EV mode until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the battery energy control module (BECM) and hybrid powertrain control module (HPCM) software. The BECM software will monitor the high-voltage battery and warn you if it detects a problem. If you see this warning, you should contact a dealership to arrange replacement of the high-voltage battery pack.

• Electrical#2026005January 9, 2026

  138,783 units affected

  Issue: On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair. Safety Risk: A short circuit can create the risk of a fire. Corrective Actions: To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.

• Seats And Restraints#2025724December 18, 2025

  5 units affected

  Issue: On a small number of vehicles, the recall repairs completed by a Ford dealer during recall 25C18 (Transport Canada recall no. 2025-277) may not have been done correctly. As a result, another repair is required. On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system. Safety Risk: A seat belt warning that doesn't work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the audio control module software.

• Powertrain#2025691December 12, 2025

  50,037 units affected

  Issue: On certain vehicles, a problem in the integrated park module could cause the park pawl not to engage when the transmission is shifted to the park (P) position. If this happens, the vehicle could move when it's parked, and the parking brake isn't used. Note: This problem would cause a wrench light and a shift system fault message to be displayed in the instrument cluster. For the Maverick, Escape and Corsair models, this recall only affects vehicles equipped with a 2.5 L hybrid engine. For the F-150 model, this recall only affects Lightning (electric) models. Safety Risk: A parked vehicle that rolls away could create the risk of an injury or a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the secondary on board diagnostic module (SOBDMC) software.

• Seats And Restraints#2025690December 12, 2025

  162 units affected

  Issue: On certain vehicles, the left and right rear seat belt retractors may not have been secured properly. As a result, the seat belts may not work properly in a crash. Safety Risk: A seat belt that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and secure or replace the rear seat belt retractor bolts, as necessary.

• High Voltage#2025628November 14, 2025

  8,751 units affected

  This recall was replaced by Transport Canada recall no. 2026-070. Issue: On certain vehicles, the software update installed by a Ford dealer during recall 24S79 (Transport Canada recall no. 2024-781) may not be effective. As a result, a second repair is required. On certain vehicles, a problem inside the high-voltage battery could cause a short circuit. If this happens, there could be a loss of power to the wheels and/or the high-voltage battery could overheat. Note: This recall only affects certain plug-in hybrid vehicles (PHEV) equipped with a 2.5 L engine. Safety Risk: A loss of power to the wheels could increase the risk of a crash. A battery that overheats can create a fire risk, even while the vehicle is parked and turned off. Corrective Actions: To reduce the safety risk, Ford advises not to charge your vehicle until the recall repairs have been completed. Ford will notify owners by mail. The corrective actions for this recall are under development.

• Visual System#2025583October 24, 2025

  3,044 units affected

  Issue: On certain vehicles, the windshield glass may not have been manufactured properly. As a result, air bubbles could appear in the windshield glass. Safety Risk: Air bubbles in the windshield glass could cause reduced visibility and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the windshield glass.

• Lights And Instruments#2025551October 11, 2025

  11 units affected

  Issue: On certain vehicles, the rear combination lamps may have been damaged during production. As a result, water could enter the rear combination lamps and cause the reverse lamps, brake lamps, taillamps and rear turn signals not to work. Safety Risk: Brake lights, reverse lights and/or turn signals that don't work could cause a person not to recognize that a vehicle ahead is braking, backing up or about to turn. Tail lights that don't work could make the vehicle less visible to others. All these issues could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the rear combination lamps.

• Electrical#2025554October 10, 2025

  128,886 units affected

  This recall was replaced by Transport Canada recall no. 2026-005. Issue: On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Safety Risk: A short circuit can create the risk of a fire. Corrective Actions: To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater.

• Visual System#2025412August 8, 2025

  2,278 units affected

  Issue: On certain trucks, water could leak into the connector for the rearview camera. Over time, this could cause corrosion to the ground wire. If this happens, the rearview camera image may not display correctly or at all. Note: Vehicles equipped with 360-degree camera systems are not affected by this recall. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your truck to a dealership to replace the rearview camera and the rearview camera wiring harness.

• Visual System#2025360June 27, 2025

  16,575 units affected

  Issue: On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC software.

• Engine#2025283May 23, 2025

  289 units affected

  Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 23S27 (Transport Canada recall no. 2023-309) may not have been done correctly. As a result, a second repair is required. On certain vehicles equipped with a 2.5 L HEV or PHEV engine, a manufacturing problem could lead to an engine failure. In some cases, an engine failure can create the risk of a fire. Safety Risk: An engine failure could cause a fire. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or notice reduced engine power.

• Engine#2025281May 23, 2025

  40,428 units affected

  Issue: On certain vehicles, the engine block heater could overheat when the block heater is plugged in. Note: This recall only affects certain vehicles equipped with a 1.5 L or 2.0 L engine and a factory-installed block heater. Safety Risk: An engine block heater and/or wiring that overheats or melts could create the risk of a fire. Corrective Actions: To reduce the safety risk, Ford advises you not to plug in the engine block heater until the recall repairs have been completed. Ford will notify owners by mail. You can choose to have the dealer remove the block heater, or once the final repair is available, Ford will send you another notice to advise you to take your vehicle to a dealership to replace the block heater element. The dealer will also inspect and, if necessary, replace the block heater electrical cord.

• Seats And Restraints#2025277May 23, 2025

  461 units affected

  Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 22C35 (Transport Canada recall no. 2022-743) may not have been done correctly. As a result, a second repair is required. On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system. Safety Risk: A seat belt warning that doesn't work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the audio control module software.

• Visual System#2025260May 9, 2025

  159,135 units affected

  Issue: On certain vehicles, a software problem could cause the rearview camera image not to display or to freeze when the transmission is shifted into reverse. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the SYNC software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.

• Visual System#2025140March 14, 2025

  3,738 units affected

  Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 23S23 (Transport Canada recall no. 2023-288) may not have been done correctly. As a result, a second repair is required. On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.

• Powertrain#2025108March 2, 2025

  11 units affected

  Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 24S33 (Transport Canada recall no. 2024-270) may not have been done correctly. As a result, a second repair is required. On certain hybrid vehicles, a software update completed by a Ford dealer could cause the transmission to shift into neutral (N) unexpectedly. If this happens, there could be a sudden loss of power to the wheels. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the hybrid powertrain control module software.

• Visual System#2025043January 31, 2025

  8,552 units affected

  Issue: On certain vehicles, the rearview camera image may not display correctly or at all. Note: This recall also affects certain Super Duty incomplete vehicles. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail. The corrective actions for this recall are under development.

• High Voltage#2024781December 20, 2024

  8,825 units affected

  Issue: On certain vehicles, a problem inside the high-voltage battery could cause a short circuit. If this happens, there could be a loss of power to the wheels and/or the high-voltage battery could overheat. Note: This recall only affects certain plug-in hybrid vehicles (PHEV) equipped with a 2.5 L engine. Safety Risk: A loss of power to the wheels could increase the risk of a crash. A battery that overheats can create a fire risk, even while the vehicle is parked and turned off. Corrective Actions: To reduce the safety risk, Ford advises not to charge your vehicle until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the battery energy control module (BECM) software. The software will monitor the high-voltage battery and warn you if it detects a problem. If you see this warning, you should contact a dealership to arrange replacement of the high-voltage battery pack.

• Powertrain#2024270May 10, 2024

  590 units affected

  Issue: On certain hybrid vehicles, a software update completed by a Ford dealer could cause the transmission to shift into neutral (N) unexpectedly. If this happens, there could be a sudden loss of power to the wheels. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the hybrid powertrain control module software.

• Engine#2023309May 29, 2023

  26,905 units affected

  Issue: On certain vehicles equipped with a 2.5 L HEV or PHEV engine, a manufacturing problem could lead to an engine failure. In some cases, an engine failure can create the risk of a fire. Safety Risk: An engine failure could cause a fire. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software or replace the engine, as necessary. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or notice reduced engine power.

• Visual System#2023288May 15, 2023

  43,582 units affected

  Issue: On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall replaces recall 23S02 (Transport Canada Recall No. 2023-018). Vehicles that were repaired under that recall also require this second repair. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.

• Visual System#2023018January 24, 2023

  39,978 units affected

  This recall was replaced by Transport Canada Recall No. 2023-288. Issue: On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to update the image processing module (IPMB) software.

• Seats And Restraints#2022743December 27, 2022

  11,211 units affected

  Issue: On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system. Safety Risk: A seat belt warning that does not work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealership to update the audio control module software.

• Engine#2022366July 7, 2022

  22,950 units affected

  Issue: On certain hybrid models, an engine failure can cause a significant buildup of engine oil and/or fuel vapour under the hood. In some cases, this could cause a fire. Note: This recall only affects certain vehicles equipped with a 2.5 L HEV or PHEV engine. Safety Risk: A buildup of engine oil and/or fuel vapour after an engine failure could cause a fire. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealership to modify the under-engine shield and active grille shutter. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or believe the engine has failed.

• Visual System#2021586September 24, 2021

  24,101 units affected

  Issue: On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to update the image processing module (IPMB) software.

• Fuel System#2021508August 12, 2021

  2,398 units affected

  Issue: On certain vehicles, the fuel delivery module could leak inside the fuel tank. If this happens, low fuel pressure could cause the engine not to start, or it could stall while driving. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel delivery module.

• Powertrain#2021011January 18, 2021

  33 units affected

  Issue: On certain vehicles, the rear drive unit was not properly filled with oil. As a result, the rear axle could seize. If this happens, the rear wheels could lock up and cause a loss of power to the wheels. Safety Risk: A rear-wheel lock up while driving could cause a loss of control that could result in a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to check the oil level in the rear drive unit. If the drive unit is filled to the minimum oil level, it will be topped up to the full level. If the oil is below the minimum level, the drive unit will be replaced.

• Visual System#2020454September 24, 2020

  76,576 units affected

  Issue: On certain vehicles, an electrical problem with the rearview camera could cause it not to work properly. As a result, the rearview image may be distorted or not display at all. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rearview camera.

• Suspension#2020372August 13, 2020

  491 units affected

  Issue: On certain vehicles, there may not be enough space between the rear coil spring and the rear toe link bracket. As a result, the protective coating on the coil spring could wear away. If this happens, over time, the spring could fracture. A spring that breaks could fall from the vehicle. Safety Risk: A broken coil spring could create a road hazard for others and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the clearance between the rear toe link bracket and the coil spring. If necessary, the toe link bracket edge will be trimmed and a new coil spring will be installed.

Canadian data updated August 24, 2026