Lexus RX 350 recalls

• Visual System#2026125March 18, 2026

  17,195 units affected

  Issue: Under certain conditions, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Lexus will notify owners by mail and advise you to take your vehicle to a dealership to update the rearview camera software or replace the rearview camera, as necessary.

• Visual System#2025594October 30, 2025

  99,178 units affected

  Issue: Under certain conditions, a software problem could cause the rearview camera image to freeze or not to display. If this happens, the rearview image may not display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall only affects certain vehicles equipped with a panoramic view monitor system. Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: The company will notify owners in writing and advise you to take your vehicle to a dealership to update the parking assist ECU software.

• Seats And Restraints#2025050February 6, 2025

  1,358 units affected

  Issue: On certain vehicles, the second-row center seat belt may have been damaged during production. As a result, the seat belt could break in a crash. If this happens, the seat belt may not hold a person in place during the crash. Safety Risk: A seat belt that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: To reduce the safety risk, the company advises that you shouldn't transport a passenger in the second-row center seat until the recall repairs are completed. The company will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the second-row center seat belt assembly.

• Seats And Restraints#2024367June 27, 2024

  1,021 units affected

  Issue: On certain vehicles, the head restraints on the front seats may not have been manufactured properly. As a result, the head restraints could move or detach from the seats in a crash. Safety Risk: Head restraints that move or detach in a crash could increase the risk of an injury. Corrective Actions: Lexus will notify owners by mail and advise you to take your vehicle to a dealership to replace the front seat head restraints.

• Airbag#2023684December 20, 2023

  99,965 units affected

  Issue: On certain vehicles, a sensor for the occupant classification system (OCS) may not have been manufactured properly. As a result, the sensor could short circuit and cause the airbag system to turn off the passenger-front airbag even when a passenger is seated. Note: This problem would cause a warning message to display on the instrument panel and the airbag indicator light would display "passenger airbag off". Safety Risk: An airbag that is turned off could increase the risk of injury to a passenger in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the OCS sensor.

• Electrical#2021723November 24, 2021

  55,683 units affected

  Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

• Fuel System#2020514October 28, 2020

  126,597 units affected

  Issue: On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This recall is an expansion of recalls SRC R95/SRC R96 and SRC RA2/SRC RA3 (Transport Canada Recall Numbers 2020-005 and 2020-088). Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Fuel System#2020088March 4, 2020

  111,835 units affected

  Issue: On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This recall is an expansion of recall SRC R95/SRC R96 (Transport Canada Recall No. 2020-005) Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Fuel System#2020005January 13, 2020

  46,733 units affected

  Issue: On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Brakes#2018155April 3, 2018

  220 units affected

  On certain vehicles, an oil passage in the rotor of the vacuum pump may not have been machined properly and could result in oil not being distributed throughout the pump. This could lead to the illumination of a warning light and message, an audible tone, and a sudden loss of braking assist, which could increase stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the vacuum pump with a new one.

• Airbag#2018061January 31, 2018

  4,571 units affected

  On certain vehicles, the airbag system pressure sensors and/or acceleration sensors used to detect vehicle impact may contain manufacturing defects. As a result, the airbag warning light may illuminate and the side/curtain shield airbags and/or front airbags may not deploy, increasing the risk of injury in the event of a crash. Correction: Dealers will inspect and replace the defective sensors as necessary. Note: This will not affect the front airbags of the Prius model.

• Electrical#2017363July 20, 2017

  39,189 units affected

  On certain vehicles, the electrical power cords of some dealer installed block heaters may have been improperly manufactured, causing the wires to contact each other, resulting in a short circuit. A short circuit could lead to a fire which would increase the risk of injury and/or damage to property. Correction: For vehicles where the subject block heater was approved for installation, the dealer will replace the block heater assembly with a new one of an improved design. For vehicles where the subject block heater was not approved for installation, dealers will remove the block heater assembly. In the interim, until the remedy can be performed, dealers will cut the plug end from the block heater cord to disable the block heater's operation.

• Fabrics#2016599December 1, 2016

  8,889 units affected

  Certain vehicles may not comply with Canada Motor Vehicle Safety Standard 302 - Flammability. Some of the materials used in the construction of the seat upholstery may not meet the requirements of the standard when tested individually. The seat does meet the requirements of the standard when tested as an assembly. Correction: A production change has been undertaken to remedy this non-compliance condition. No corrective recall action is required as the non-compliance condition is deemed to be non-safety related.

• Brakes#2016147April 6, 2016

  1,186 units affected

  Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 126 - Electronic Stability Control Systems. Some brake actuator pumps may have been assembled with an O-ring that is damaged in such a way that the brake fluid pressure may not be properly controlled during Anti-Lock Braking (ABS), Traction Control (TRAC), and Vehicle Stability Control (VSC) system activation(s), which fails to meet the requirements of the standard. This could result in a loss of vehicle stability control, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the serial number of the brake actuator and, if necessary, replace the brake actuator assembly.

• Seats And Restraints#2016040January 27, 2016

  790 units affected

  On certain vehicles, the driver’s knee airbag inflator may have been assembled with an improperly located weld seam. If this condition is present, the weld could be insufficient or be damaged during the clinching process after the inflator was filled with gas, which could cause the stored gas to leak. Leakage of the stored gas could affect the performance of the knee airbag. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the knee airbag assembly.

• Fuel System#2014409September 18, 2014

  1,422 units affected

  On certain vehicles, the end cap on the right-hand side fuel delivery pipe, located in the engine compartment, could have been improperly welded at time of manufacture. This could result in a fuel leak which, in the presence of an ignition source, could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel delivery pipe and replace with a revised part if necessary.

• Brakes#2014043February 12, 2014

  25,557 units affected

  On certain vehicles, a manufacturing defect could affect the functioning of the electric brake actuator, illuminating various warning lights in the instrument panel of the vehicle and disabling the antilock braking system (ABS), traction control and vehicle stability control systems. This could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will update the vehicle stability control ECU software and affect repairs as necessary.

• Other#2012192June 29, 2012

  14,478 units affected

  On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver’s floor mat. A fully depressed accelerator pedal may result in very high vehicle speeds and make it difficult to slow or stop the vehicle. This could result in a crash causing property damage and/or personal injury. Correction: Dealers will modify or replace the accelerator pedal.

• Brakes#2011272July 26, 2011

  493 units affected

  On certain vehicles equipped with Vehicle Dynamics Integrated Management (VDIM), the calibration for the hydraulic control valves was incorrectly written and programmed into the brake actuator electronic control unit. As such, the right front wheel could lock during Anti-lock Brake System (ABS) or Vehicle Stability Control (VSC) actuation. This could result in increased stopping distances and/or failure to adequately correct excessive vehicle yaw, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the brake actuator assembly with an updated version.

Canadian data updated August 24, 2026