2024 Kenworth W990 recalls

• Lights And Instruments#2025357June 26, 2025

  4,428 units affected

  Issue: On certain trucks, a software problem could cause the stop lamps, low beam headlamps, high beam headlamps, reverse lamps and turn signal lamps not to turn on, or to turn on unexpectedly. This problem could also cause the lift axle(s) to raise or lower on their own. Safety Risk: Lamps that don't work properly could reduce visibility and increase the risk of a crash. Lift axles that move unexpectedly could increase the risk of injury. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to update the vehicle software.

• Brakes#2024744December 9, 2024

  23,441 units affected

  Issue: On certain trucks, poor signal strength could cause the electronic control unit (ECU) to stop working or not to work properly. As a result, some safety systems may not work, including the antilock braking system, automatic traction control, electronic stability control, active cruise control and the collision mitigation system. Safety Risks: Vehicle safety systems that don't work correctly could increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to reprogram the ECU software.

• Steering#2024732December 3, 2024

  14 units affected

  Issue: On certain trucks, the bolts for the steering arm and/or tie rods may not have been tightened properly. As a result, the bolts could loosen and separate. If this happens, there could be a loss of steering control. Note: This recall only affects certain trucks equipped with 20k steer axles. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to replace the affected bolts and tighten them properly.

• Steering#2024036January 25, 2024

  2,651 units affected

  Issue: On certain trucks, the steering gear may not have been assembled correctly. As a result, the steering gear could break and cause a loss of steering. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealership to inspect the serial number on the steering gear and, if necessary, replace it.

Canadian data updated August 24, 2026

• ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL#25V569000September 2, 2025

  PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T680, T880, and W990 trucks. The 15-inch digital display may fail to display warning lights or vehicle speed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Controls and Displays" and 121, "Air Brake Systems."

  Risk: An instrument panel display that does not show critical information, such as warning lights or vehicle speed, increases the risk of a crash.

  Remedy: Dealers will update the vehicle display software, free of charge. Owner letters were mailed October 27, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888. PACCAR's number for this recall is 25PACG.

• EXTERIOR LIGHTING:LIGHTING CONTROL MODULE:SOFTWARE#25V436000June 26, 2025

  PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T480, T680, T880, W990, Peterbilt 520, 536, 537, 548, 567, 579, 589, 2025 Kenworth T180, Peterbilt 535, 2025-2026 Kenworth T280, T380 and L770 vehicles. The tail brake light, upper and lower beam headlights, reverse light, and turn signal may not illuminate as intended. In addition, the lift axles, if lowered, may revert to a raised position, or oscillate up and down when the signal warning lights are activated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices and Associated Equipment."

  Risk: Delayed and unsteady headlights can result in insufficient illumination of the road, decreasing the driver's visibility and increasing the risk of a crash. In addition, an unexpected position change of the lift axles may increase the risk of injury.

  Remedy: Dealers will update the VCU software, free of charge. Owner letters were mailed August 19, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's number for this recall is 25PACF.

• SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE#24V915000December 10, 2024

  PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.

  Risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.

  Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.

• POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT#24V190000March 20, 2024

  PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Peterbilt 365, 367, 389, 535, 536, 537, 548, 567, 579, and 2021-2025 Kenworth T180, T280, T380, T480, T680, T880 and W990 trucks. The right-hand gear shifter stalk connectors may have been improperly crimped, resulting in a loss of communication.

  Risk: A loss of communication between the gear shifter and the transmission may result in the vehicle becoming disabled after coming to a stop, increasing the risk of a crash.

  Remedy: Dealers will inspect and replace the gear shifter assembly as necessary, free of charge. Owner letters were mailed December 15, 2025, then phased after that. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24PBE and 24KWE.

• STEERING#24V044000January 25, 2024

  PACCAR Incorporated (PACCAR) is recalling certain 2024-2025 Kenworth T280, T380, T480, T680, T880, L770, W990, and 2024-2025 Peterbilt 389, 520, 535, 536, 537, 548, 567, 579, 589 trucks. The steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control.

  Risk: A loss of steering control increases the risk of a crash.

  Remedy: Dealers will inspect and replace the steering gears as necessary, free of charge. Owner notification letters were mailed March 20, 2024. Owners may contact Peterbilt customer service at 1-940-591-4220 and/or Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 24PBC and 24KWC.

• STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM#24V043000January 25, 2024

  PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 520, 567, and Kenworth T800, T880, W900, and W990 trucks. The bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies.

  Risk: An improperly installed wheel end hub assembly can leak oil, causing the axle spindles to loosen or fracture and increasing the risk of a crash.

  Remedy: Dealers will inspect and replace the steering knuckle assemblies as necessary, free of charge. Owner letters were mailed February 23, 2024. Owners may contact Peterbilt customer service at 1-940-591-4220 and/or Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 24PBB and 24KWB.