Skip to content
VINscan

RECALLS — MAKE · MODEL · YEAR

2021 Kenworth T800 recalls

9 safety recall campaigns have been filed for the 2021 Kenworth T800 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls
04
U.S. recalls
05
Total campaigns
09

Transport Canada recalls

04
  • Brakes#2024121

    171 units affected

    Issue: On certain trucks, the reservoir tank for the air brake system is too small. In certain situations, this could cause reduced braking. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking can cause extended stopping distances and increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to replace or add an additional air reservoir tank, as necessary.

  • Seats And Restraints#2023573

    1,532 units affected

    Issue: On certain trucks, a spacer installed between the seat frame and the seat belt buckle may cause the seat belt to slip and not to work properly in a crash. Safety Risk: A seat belt that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to remove the spacer(s) and replace the bolt(s).

  • Powertrain#2021069

    47 units affected

    Issue: On certain vehicles, the cap screws that attach the flywheel to the crankshaft may not have been properly tightened. As a result, the flywheel could detach. If this happens, there could be a loss of power to the wheels and parts could be ejected from the engine compartment. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Parts that are ejected from the engine compartment could create a risk of injury. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to tighten the flywheel cap screws. Cummins will repair damaged components, as necessary.

  • Suspension#2020399

    502 units affected

    Issue: On certain trucks, the lift axle pivot bolts may be too short and may not be properly tightened. As a result, the bolts could come loose or break. If this happens, parts could fall from the truck. Note: This recall only affects trucks built with Watson Chalin SL2065 lift axles. Safety Risk: Large fasteners that fall on the road could create a road hazard for others and increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealer to inspect and replace the lift axle pivot bolts, as necessary.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

05
  • SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK#24V145000

    PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

    Risk: Insufficient air volume can reduce braking performance and increase the risk of a crash.

    Remedy: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

  • SEAT BELTS#23V717000

    PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T660, 2018-2024 Kenworth T800 and W900 vehicles. An additional spacer may have been added to the joint that connects the seat to the seat belt tether and buckle, causing an unsecured connection.

    Risk: An unsecured seat belt connection may not properly restrain an occupant during a crash, increasing their risk of injury.

    Remedy: Dealers will inspect and remove the additional spacer and replace the bolt, as necessary, free of charge. Owner letters were mailed March 20, 2024. Owners may contact PACCAR's customer service at 1-425-828-5888. PACCAR's number for this recall is 23KWK.

  • FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL#21V391000

    PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.

    Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.

    Remedy: Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.

  • ENGINE#21V080000

    PACCAR Incorporated (PACCAR) is recalling certain 2021-2022 Kenworth T680, T880, W990, T800, W900 and Peterbilt 579, 567, 389, 367 vehicles equipped with a Cummins X15 engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.

    Risk: A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.

    Remedy: PACCAR will notify owners, and dealers will properly torque the capscrews and the engine will also be inspected for damage and, if necessary, repaired, free of charge. The recall began on March 29, 2021. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWA and 21PBB.

  • POWER TRAIN:AXLE ASSEMBLY#20V506000

    PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.

    Risk: The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.

    Remedy: PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 20PBE and 20KWC.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

Check a 2021 Kenworth T800 VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits