Does the 2020 Kenworth T370 have any recalls?

Transport Canada lists 5 campaigns and the U.S. NHTSA lists 6 for the 2020 Kenworth T370. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2020 Kenworth T370?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2020 Kenworth T370 recalls

11 safety recall campaigns have been filed for the 2020 Kenworth T370 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 05
U.S. recalls: 06
Total campaigns: 11

Transport Canada recalls

Steering#2022210April 25, 2022
985 units affected
Issue: On certain trucks, the fasteners that attach the steer arm to the steering knuckle may fail. If this happens, the steer arm could separate from the steering knuckle and cause a loss of steering control. Note: This recall only affects trucks equipped with a Dana D-series steer axle. Safety Risk: A loss of steering control could increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail. The corrective actions for this recall are under development.
Fuel System#2021323May 26, 2021
19 units affected
Issue: On certain trucks, the fuel rail assembly could develop a leak. Note: This recall only affects trucks equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.
Lights And Instruments#2020148April 7, 2020
65,284 units affected
Issue: On certain trucks, the warning light for the tractor anti-lock brake system (ABS) may not turn on if the system loses power. If this happens, the driver will not get warning that the ABS is not working properly. Note: This problem would also cause the traction control (TC) and electronic stability control (ESC) lights not to turn on. Safety Risk: If a driver is not warned that the ABS is not working properly, there could be an increased risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealer to update the software for the cab control module (CECU).
Brakes#2020057February 14, 2020
20 units affected
Issue: Certain trucks were built without a secondary brake relay valve. As a result, the brake application may be delayed after pushing on the brake pedal. This could cause increased stopping distances. Safety Risk: Delayed brake application can cause increased stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your truck to a Kenworth dealer to inspect the brake system, and add a second R12 brake relay valve, as required.
Brakes#2019415August 16, 2019
5 units affected
Issue: On certain trucks, an air supply hose for the brake system could separate due to loose compression fittings. This could result in a loss of air to the brakes. This would affect brake performance. Safety Risk: Reduced brake performance can cause increased stopping distances and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a Kenworth dealer to inspect all brake treadle valve hose connections. Any loose fittings will be properly tightened.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK#24V145000February 23, 2024
PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
Risk: Insufficient air volume can reduce braking performance and increase the risk of a crash.
Remedy: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.
STEERING:CRITICAL FASTENERS#22V277000April 25, 2022
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Risk: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Remedy: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.
FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL#21V391000May 26, 2021
PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.
ELECTRONIC STABILITY CONTROL (ESC)#20V199000April 6, 2020
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DIFFERENTIAL PROPORTIONAL VALVE#20V086000February 14, 2020
PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T370 long wheelbase vehicles with larger rear axle spacing. The vehicles may be missing a second R12 relay valve, causing increased brake activation timing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Risk: Increased brake activation timing may lengthen vehicle stopping distance, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and Kenworth dealers will install a second R12 relay valve, free of charge. PACCAR issued owners an interim notification on April 14, 2020. The recall began May 6, 2020. Owners may contact Kenworth customer service at 1-425-828-5888. PACCAR's number for this recall is 20KWA.
SERVICE BRAKES, AIR:CONTROLS:FOOT CONTROL/VALVE#19V606000August 16, 2019
PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T270 and T370 vehicles. The brake treadle valves may have loose compression fittings, which can cause the air supply hose to separate from the valve.
Risk: A separated hose may cause reduced braking ability, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will inspect the brake treadle valve hose connections for loose compression fittings, tightening them as necessary, free of charge. The recall began September 30, 2019. Owners may contact Kenworth customer service at 1-425-828-5888. PACCAR's number for this recall is 19KWD.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2020 Kenworth T370 VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →