Does the 2011 Kenworth T270 have any recalls?

Transport Canada lists 4 campaigns and the U.S. NHTSA lists 4 for the 2011 Kenworth T270. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2011 Kenworth T270?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2011 Kenworth T270 recalls

8 safety recall campaigns have been filed for the 2011 Kenworth T270 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 04
U.S. recalls: 04
Total campaigns: 08

Transport Canada recalls

Lights And Instruments#2020148April 7, 2020
65,284 units affected
Issue: On certain trucks, the warning light for the tractor anti-lock brake system (ABS) may not turn on if the system loses power. If this happens, the driver will not get warning that the ABS is not working properly. Note: This problem would also cause the traction control (TC) and electronic stability control (ESC) lights not to turn on. Safety Risk: If a driver is not warned that the ABS is not working properly, there could be an increased risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealer to update the software for the cab control module (CECU).
Electrical#2015190May 8, 2015
22,815 units affected
On certain vehicles, water could migrate into wiper motor head and could lead to internal corrosion. This internal corrosion could form a conductive salt bridge which could result in a short circuit, causing the wiper system to fail. Loss of windshield wiping capability, should it occur during a rainy/snowy day, may compromise the driver's ability to see the road and its users, and a short circuit could increase the risk of fire, which could result in injury and/or damage to property. Correction: Dealers will install a shield over the wiper motor to protect it from water intrusions and prevent corrosion.
Brakes#2011105March 7, 2011
64 units affected
On certain vehicles, the slack adjuster housings may have been manufactured incorrectly, which could allow the housings to fracture and fail. As a result, the wheel brake to which the slack adjuster is attached would no longer function, which could increase vehicle stopping distances. Should a steer axle slack adjuster fail, it could also cause the vehicle to pull to one side during braking. Either problem could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the slack adjusters.
Brakes#2010150May 10, 2010
2 units affected
On certain trucks, the air governor was assembled with a blank plug instead of a breather. Without the breather, the air governor may not be able to detect the loss of pressure in the air system during normal use, which may result in a slow activation of the emergency spring brakes. Although the operator is warned of low air pressure by audible and visual warning alarms, a crash causing property damage, personal injury or death is possible if these warnings are ignored. Correction: Dealers will replace the blank plug with a breather, and inspect the system for proper function.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

ELECTRONIC STABILITY CONTROL (ESC)#20V199000April 6, 2020
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR#15V271000May 8, 2015
PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
Risk: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.
Remedy: PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.
SERVICE BRAKES, AIR:SLACK ADJUSTERS#11V157000March 7, 2011
PACCAR IS RECALLING CERTAIN MODEL YEAR 2011-2012 KENWORTH T270/370, T440/T470, T800, T660, W900 AND C500 VEHICLES MANUFACTURED BETWEEN OCTOBER 18, 2010, AND JANUARY 28, 2011. CERTAIN CAST IRON SLACK ADJUSTER HOUSINGS, WHICH TRANSMIT BRAKING FORCE FROM THE BRAKE CHAMBER PUSH ROD TO THE BRAKE CAM TUBE, MAY INCLUDE A FLOW NOTCH IN THE HANDLE PORTION OF THE HOUSING DUE TO AN ERROR DURING THE CASTING PROCESS. A FLOW NOTCH IN THE HANDLE PORTION MAY REDUCE THE EFFECTIVE CROSS SECTION STRUCTURE AND CAUSE THE SLACK ADJUSTER HOUSING TO FRACTURE.
Risk: IF THE SLACK ADJUSTER HOUSING WERE TO FRACTURE, THE WHEEL BRAKE TO WHICH THE SLACK ADJUSTER HOUSING IS ATTACHED WOULD NO LONGER FUNCTION, WHICH COULD INCREASE VEHICLE STOPPING DISTANCES, AND IF MOUNTED ON THE STEER AXLE, COULD CAUSE THE VEHICLE TO PULL TO ONE SIDE DURING BRAKING, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT AND REPLACE THE SLACK ADJUSTER HOUSING AS NECESSARY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 30, 2011. OWNERS MAY CONTACT KENWORTH AT 425-828-5440.
SERVICE BRAKES, AIR#10V211000May 10, 2010
KENWORTH IS RECALLING CERTAIN MODEL YEAR 2011 T270, T370, AND T800 TRUCKS MANUFACTURED FROM JANUARY 28 THROUGH MARCH 19, 2010, EQUIPPED WITH DV-2 AIR GOVERNOR CONTAINING PART NUMBER G90-1070-2111111 ON THE T270/370 MODEL TRUCKS AND PART NUMBER G90-1070-11113111 ON THE T800 MODEL TRUCKS. THE DV-2 AIR GOVERNOR WAS MISASSEMBLED WITH A BLANK PLUG INSTEAD OF A BREATHER. WITHOUT THE BREATHER INSTALLED, THE AIR GOVERNOR MAY NOT BE ABLE TO DETECT THE LOSS OF AIR PRESSURE IN THE AIR SYSTEM DURING NORMAL USE. THIS CONDITION MAY RESULT IN THE SLOW ACTIVATION OF THE EMERGENCY SPRING BRAKES.
Risk: ALTHOUGH THE OPERATOR IS WARNED OF LOW AIR PRESSURE BY AUDIBLE AND VISUAL LOW AIR PRESSURE WARNING ALARMS, A VEHICLE CRASH OR FIRE IS POSSIBLE IF THESE WARNINGS ARE NOT HEEDED.
Remedy: KENWORTH WILL NOTIFY OWNERS AND REPAIR THE VEHICLES BY REPLACING THE BLANK PLUG WITH A BREATHER AND INSPECT FOR PROPER FUNCTION FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 10, 2010. OWNERS MAY CONTACT KENWORTH AT 1-425-828-5440.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2011 Kenworth T270 VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →