2020 Jeep Gladiator recalls

• Powertrain#2023089February 23, 2023

  7,464 units affected

  Issue: Under certain conditions, the clutch pressure plate could overheat and break. If this happens, the pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle. Note: This recall only affects certain vehicles equipped with a 3.6 L engine and a manual transmission. Vehicles repaired under FCA Canada recalls Y01, Y03 and Y07 (Transport Canada recall 2021-035) also require this repair. Safety Risk: Debris from an overheated and fractured pressure plate could contact nearby parts and increase the risk of a fire. Parts that fall from the vehicle could create a road hazard for others and increase the risk of injury. Corrective Actions: FCA Canada will notify owners by mail and advise you to tale your vehicle to a dealership to replace the clutch assembly. The dealer will also inspect and, if necessary, update the instrument panel cluster and powertrain control module software.

• Powertrain#2021035January 28, 2021

  4,349 units affected

  Issue: In certain circumstances, the clutch pressure plate could overheat and break. If this happens, the pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle. Note: This recall only affects certain vehicles equipped with a 3.6 L engine and a manual transmission. Safety Risk: Debris from an overheated and fractured pressure plate could contact nearby parts and increase the risk of a fire. Parts that fall from the vehicle could create a road hazard for others, and increase the risk of injury. Corrective Actions: FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to update vehicle software. This update will reduce the engine power if the clutch overheats.

• Seats And Restraints#2020456September 25, 2020

  127 units affected

  Issue: On certain vehicles, there could be a problem with the front seat belt retractors. As a result, the seat belts may not work as designed in a crash. Safety Risk: A seat belt that does not work properly could increase the risk of injury in a crash. Corrective Actions: Fiat Chrysler Automobiles will notify owners by mail and instruct you to take your vehicle to a dealer to replace the front seat belts.

• Visual System#2020145April 6, 2020

  46,772 units affected

  Issue: On certain vehicles, the rearview camera image may be displayed even after the transmission is shifted out of reverse. This could cause a possible distraction for the driver. Canadian regulations require the rearview image to turn off within 10 seconds after shifting from reverse gear. Safety Risk: A driver that is distracted could have an increased risk of a crash. Corrective Actions: FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to update the radio software.

• Powertrain#2020083March 3, 2020

  3,513 units affected

  Issue: On certain vehicles equipped with a manual transmission, the clutch pressure plate could overheat and break. If this happens, there would be a loss of power to the wheels. A broken pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle. Safety Risk: A sudden of loss power to the wheels could increase the risk of a crash. Additionally, debris from an overheated and fractured pressure plate could contact nearby parts and increase the risk of a fire. Parts that fall from the vehicle could create a road hazard for others, and increase the risk of injury. Corrective Actions: FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the clutch system, install a protective hose sleeve, reroute a wire harness, and replace components as necessary

• Powertrain#2019438August 29, 2019

  255 units affected

  Issue: On certain vehicles, the rear driveshaft joint may have been built without grease. As a result, the joint could fail and cause the driveshaft to detach from the vehicle. If the vehicle was in rear-wheel drive mode, this would cause a loss of power to the drive wheels. Safety Risk: A loss of power to the drive wheels could increase the risk of a crash. Additionally, a driveshaft that separates from the vehicle could create a hazard for other drivers and nearby people. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the rear driveshaft constant-velocity joint and replace the driveshaft if required.

Canadian data updated August 24, 2026

• ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL#24V652000September 5, 2024

  Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."

  Risk: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.

  Remedy: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.

• POWER TRAIN:CLUTCH ASSEMBLY#23V116000February 23, 2023

  Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

  Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

  Remedy: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.

• POWER TRAIN:CLUTCH ASSEMBLY#21V028000January 28, 2021

  Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

  Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

  Remedy: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.

• SEAT BELTS#20V580000September 24, 2020

  Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.

  Risk: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.

  Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.

• BACK OVER PREVENTION: SENSING SYSTEM: CAMERA#20V191000September 10, 2020

  Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

  Risk: The lingering rearview image can distract the driver, increasing the risk of a crash.

  Remedy: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.

• POWER TRAIN:CLUTCH ASSEMBLY#20V124000March 3, 2020

  Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

  Risk: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

  Remedy: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

• POWER TRAIN:DRIVELINE:DRIVESHAFT#19V636000August 29, 2019

  Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator vehicles. The rear driveshafts may have been incorrectly assembled without grease in the monoblock joint.

  Risk: A joint without grease may overheat and seize, possibly causing the driveshaft to fracture, resulting in a sudden loss of drive power. If the driveshaft completely separates from the vehicle it may become a road hazard. Either of these scenarios can increase the risk of a crash.

  Remedy: FCA US will notify owners, and dealers will replace the driveshaft, free of charge. The recall began October 10, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US number for this recall is V95.