Does the 2013 Itasca Ellipse have any recalls?

Transport Canada lists 5 campaigns and the U.S. NHTSA lists 2 for the 2013 Itasca Ellipse. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2013 Itasca Ellipse?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2013 Itasca Ellipse recalls

7 safety recall campaigns have been filed for the 2013 Itasca Ellipse with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 05
U.S. recalls: 02
Total campaigns: 07

Transport Canada recalls

Lights And Instruments#2024578October 1, 2024
861 units affected
Issue: On certain motorhomes, the front turn signal lights may be too small. As a result, the turn signals could be difficult to see, and the motorhomes may not meet certain requirements of Canadian regulations. Safety Risk: Turn signals that are difficult to see could cause a person not to recognize when a driver intends to turn or change lanes. This could increase the risk of a crash. Corrective Actions: Winnebago will notify owners by mail and advise you to take your motorhome to a dealership to replace the front turn signal lights.
Steering#2019286June 11, 2019
215 units affected
Issue: On certain motorhomes built on a Freightliner XBR chassis, a power steering hose may touch the power stud on the starter motor. This could cause a short circuit and may also cause a power steering fluid leak. This may result in loss of power steering assist. Safety Risk: A power steering fluid leak in the presence of an electrical arc could create the risk of a fire. Additionally, a sudden loss of power assist could make the vehicle difficult to steer and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct them to take their motorhome to a DTNA authorized service facility to reroute the power steering hose to ensure it has proper clearance.
Engine#2016378July 27, 2016
53 units affected
On certain motorhomes, when the throttle pedal is released, the associated throttle pedal sensor may not return to zero, causing the engine brake to fail to activate as expected. This could cause extended stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will replace the throttle pedal.
Accessories#2015497October 22, 2015
646 units affected
On certain motorhomes, the high pressure liquid propane (LP) hose(s) could harden and leak at the crimp fitting. A propane leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will replace the high pressure liquid propane (LP) hose(s).
Electrical#2012409December 6, 2012
150 units affected
On certain vehicles, the connector for the brake and cruise control signal diode jumper assembly may come loose, resulting in a possible intermittent or continuously open circuit. Two circuits are potentially affected. One circuit disengages the cruise control with brake pedal application, and the other circuit illuminates the brake lights with brake application. Failure of the cruise control to disengage, or of the brake lights to illuminate when the brake pedal is depressed, could result in a crash causing property damage and/or personal injury. Correction: Dealers will verify that the locking tabs on the diode jumper assembly connector are fully engaged and locked into place.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

EXTERIOR LIGHTING:TURN SIGNAL#24V733000October 1, 2024
Winnebago Industries, Inc. (Winnebago) is recalling certain 2013-2017 Tour, 2013-2018 Journey, 2014-2022 Forza, 2015-2016 Brave, 2015-2019 Grand Tour, 2015-2021 Vista, 2016-2018 Adventurer, Sightseer, 2016-2021 Commercial Vehicle, 2018-2021 Intent, Sunstar, 2018-2020 Horizon, Itasca 2013-2017 Ellipse, Meridian, 2014-2017 Solei, 2015-2016 Tribute, 2015-2018 Sunstar, 2016-2018 Suncruiser, and Sunova motorhomes. The turn signals may have a smaller than required luminous lens area. As such these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk: A small lens can make it difficult for other drivers to see the turn signal, increasing the risk of a crash.
Remedy: Dealers will replace the turn signals, free of charge. Owner notification letters were mailed April 17, 2026. Owners may contact Winnebago Customer Care at 1-800-537-1885. Winnebago's number for this recall is 189.
ELECTRICAL SYSTEM#12V566000December 6, 2012
Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.
Risk: Failure of the cruise control to disengage when the brakes are applied may increase the risk of a vehicle crash. Without the brake lights illuminating when the brakes are applied, the driver's intent is not communicated, increasing the risk of a crash.
Remedy: Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1-641-585-3535 or Daimler Trucks at 1-503-745-6910.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2013 Itasca Ellipse VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →