Does the 2017 International Lonestar have any recalls?

Transport Canada lists 6 campaigns and the U.S. NHTSA lists 6 for the 2017 International Lonestar. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2017 International Lonestar?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2017 International Lonestar recalls

12 safety recall campaigns have been filed for the 2017 International Lonestar with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 06
U.S. recalls: 06
Total campaigns: 12

Transport Canada recalls

Lights And Instruments#2023293May 18, 2023
1,764 units affected
Issue: On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations. Note: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL. Safety Risk: Backup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.
Heater And Defroster#2023212April 6, 2023
3,134 units affected
Issue: On certain trucks, a wire terminal for the blower motor circuit breaker in the power distribution module (PDM) could overheat and melt. Safety Risk: Wiring that overheats and melts can create the risk of a fire. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to replace the blower motor wiring terminal in the PDM. The dealership will also inspect and, if necessary, replace the fuse block.
Engine#2018475September 5, 2018
3,970 units affected
On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling system may cause a fuel line to burst. This could result in a significant fuel leak onto the roadway, which would create a road hazard for other motorists. Additionally, this condition could also cause an engine stall without warning, without the ability to restart the engine. Both of these conditions may increase the risk of a crash causing injury and/or damage to property. Correction: Cummins-authorized dealers will replace the affected nylon line with a steel line.
Brakes#2017140March 14, 2017
663 units affected
On certain vehicles, the air dryer mounting bracket may fracture and cause the air dryer to separate the frame. This could potentially cause the air lines to separate from the dryer resulting in an air system leak or loss of air pressure to the brake system, which would increase stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the air dryer mounting bracket with an updated heavy duty bracket.
Electrical#2016648December 21, 2016
62 units affected
On some vehicles, the metallic battery box cover latch, when unlatched from its anchor, may articulate and potentially contact the battery jump start stud. If the jump start stud's protective cover has fallen off or is not installed, this may result in an electrical short to ground, increasing the risk of a fire causing injury and/or property damage. Correction: Dealers will install a latch stop to prevent the latch from potentially contacting the stud.
Engine#2016315June 20, 2016
159 units affected
On certain vehicles, the Engine Control Module (ECM) may develop an internal electrical short circuit that could blow a fuse in the ECM's electrical supply circuit. This could cause the engine to stall without warning and prevent the vehicle from being restarted. Engine stalling without warning would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ECM.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

ELECTRICAL SYSTEM:SOFTWARE#25V817000November 25, 2025
International Motors, LLC (International) is recalling certain 2016 7600, 2016-2023 Lonestar, 2018 8600, 2018-2023 LT, 2021-2026 MV, 2022-2023 RH, 2023-2026 HX, and 2025-2026 HV vehicles. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Risk: Safety systems that depend on the ECU, such as Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System, may have diminished or lost functionality, increasing the risk of a crash.
Remedy: International will work with Bendix to reprogram the ECU, free of charge. Owner notification letters were mailed January 19, 2026. Owners may contact International's customer service at 1-800-448-7825. International's number for this recall is 25525. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 12, 2026.
ELECTRICAL SYSTEM:WIRING#23V248000April 6, 2023
Navistar, Inc. (Navistar) is recalling certain 2016-2017 International TranStar, 2017-2019 International ProStar, International LoneStar, 2017-2020 International DuraStar, WorkStar, and 2018-2019 IC Bus HC Commercial buses. The heating, ventilation, and air-conditioning (HVAC) blower motor circuit may have an insufficient wiring terminal that can overheat.
Risk: An overheated electrical circuit can increase the risk of a fire.
Remedy: Dealers will replace the HVAC blower motor load circuit wiring terminal, free of charge. Owner notification letters are expected to be mailed June 5, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23510.
ENGINE AND ENGINE COOLING:ENGINE:DIESEL#18V588000September 5, 2018
Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
Risk: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Remedy: Cummins will notify the affected owners and dealers will replace the nylon fuel line with a steel fuel line, free of charge. Navistar issued owners an interim notification on October 11, 2018. The recall began November 21, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.
SERVICE BRAKES, AIR#17V174000March 14, 2017
Navistar Inc. (Navistar) is recalling certain 2016-2018 International LT, 2016-2017 International ProStar, 2017-2018 International LoneStar and International RH heavy diesel trucks. The air dryer mounting bracket may fracture, causing air system leaks or a loss of air pressure to the brake system.
Risk: A loss of brake air pressure could lengthen the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy: Navistar will notify owners, and dealers will replace the air dryer mounting bracket, free of charge. The recall began on May 12, 2017. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for the recall is 17502.
ELECTRICAL SYSTEM:12V/24V/48V BATTERY#16V938000December 28, 2016
Navistar, Inc. (Navistar) is recalling certain 2017 International ProStar, LoneStar, 9900i, and TranStar trucks. The affected vehicles have a metallic battery cover latch that may unlatch and contact the battery jump start stud, causing an electrical short to ground if the jump start stud is not covered.
Risk: An electrical short to ground increases the risk of a fire.
Remedy: Navistar will notify owners, and dealers will install a latch stop to prevent the latch from rotating to the unlatched position, free of charge. The recall began on January 27, 2017. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 16513.
ENGINE AND ENGINE COOLING:ENGINE:DIESEL#16V453000June 21, 2016
Navistar, Inc. (Navistar) is recalling certain model year 2017 International ProStar, LoneStar, PayStar, HX, and 9900 trucks equipped with a Cummins ISX15L engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine.
Risk: An engine stall can increase the risk of a crash.
Remedy: Cummins will notify owners, and Cummins dealers will replace the ECM, free of charge. The recall began on July 8, 2016. Owners may contact Cummins customer service at 1-800-343-7357 or Navistar customer service at 1-331-332-1590.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2017 International Lonestar VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →