Does the 2018 Infiniti QX30 have any recalls?

Transport Canada lists 2 campaigns and the U.S. NHTSA lists 3 for the 2018 Infiniti QX30. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2018 Infiniti QX30?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2018 Infiniti QX30 recalls

5 safety recall campaigns have been filed for the 2018 Infiniti QX30 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 02
U.S. recalls: 03
Total campaigns: 05

Transport Canada recalls

Visual System#2019459September 13, 2019
126,195 units affected
Issue: On certain vehicles, the rear view camera system does not return to the default setting when the transmission is shifted to reverse. This could cause a reduction in rear visibility if a driver had previously adjusted the camera display. Canadian regulations require that the rear view image returns to its original setting each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rear view camera.
Airbag#2017538November 2, 2017
1,686 units affected
On certain vehicles, electrostatic discharge, when combined with a broken clock spring and insufficient grounding of the steering components, could lead to an inadvertent deployment of the driver's frontal airbag. Unintended airbag deployment, in a non-warranted (non-impact) situation, could startle the driver, which could result in a crash causing injury and/or property damage. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: Dealers will add sufficient grounding to the steering components. Note: A broken clock spring would result in a driver airbag warning message appearing in the instrument cluster, as well as a red airbag warning lamp illuminating.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA#19V654000September 12, 2019
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Risk: The lack of an image in the back-up camera display increases the risk of a crash.
Remedy: Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.
SEAT BELTS:FRONT:ANCHORAGE#18V355000May 30, 2018
Nissan North America, Inc. (Nissan) is recalling certain 2018 Infiniti QX30 vehicles. The bolt securing the right-hand side lower seat belt anchorage may have been incorrectly installed during production. This can result in the lower seat belt anchorage detaching in a crash. As such, these vehicles fail to comply with certain requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages", number 209, "Seat Belt Assemblies, and number 208, "Occupant Crash Protection."
Risk: If the lower seat belt anchorage detaches in a crash, it can increase the risk of injury.
Remedy: Nissan will notify owners, and dealers will weld in a new retaining plate and secure the seat belt anchorage with a new anchor bolt, free of charge. All vehicles were repaired July 17, 2018. Owners may contact Infiniti customer service at 1-800-662-6200.
AIR BAGS:FRONTAL#17V691000November 1, 2017
Nissan North America, Inc. (Nissan) is recalling 2017-2018 Infiniti QX30 vehicles. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.
Risk: If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
Remedy: Nissan will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began March 26, 2018. Owners may contact Infiniti customer service at 1-800-622-6200, option 7.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2018 Infiniti QX30 VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →